$15 - $20

TDS300/P Conductivity Solution, 300ppm/445uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

CN9960-B COD Standard, 1000ppm, 60mL by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 60 mL

90260-43 Pocket Liquid-In-Glass Thermometer; -10 to 110C, Closed Metal Case, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in laboratory, biology, chemistry, university, photographic, food/beverage, petrochemical, automotive, wastewater and many other general purpose applications. The protective plastic case protects these thermometers from accidental breakage during use and storage. The section of the case that surrounds the bulb has small openings for circulation. All DURAC Plus® thermometers feature markings that are permanently printed on the glass, blue spirit liquid that has a dark scale contrasts against a white background.

• Non-mercury blue spirit liquid
• Closed metal case

Includes

Rugged metal case with an eyelet at the top for easy suspension

MA9064 80,000 μS/cm Conductivity Calibration Solution - 230 ml Bottle by Milwaukee

The performance of conductivity probes are affected by use due to residue build up and aging.

MA9064 is a lab grade 80,000 μS/cm conductivity solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter.

Conductivity readings are effected by temperature. To help with this, a chart of the actual μS/cm value at various temperatures is printed on each bottle

Milwaukee conductivity solutions are labeled with the lot number and expiration date and packaged in an air tight, tamper-proof sealed bottle.

DESIGN FEATURES

• Fundamental for accurate conductivity measurement.
• Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
• Sealed against light with air tight, tamper proof cap.
• Each 230 mL bottle is marked with lot number and expiration date.
• A temperature chart of the actual µS/cm value at various temperatures is printed on each bottle.
• 5 year expiry date.

MA9063 84 μS/cm Conductivity Calibration Solution - 230 ml Bottle by Milwaukee

The performance of conductivity probes are affected by use due to residue build up and aging.

MA9063 is a lab grade 84 μS/cm conductivity solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter.

Conductivity readings are effected by temperature. To help with this, a chart of the actual μS/cm value at various temperatures is printed on each bottle

Milwaukee conductivity solutions are labeled with the lot number and expiration date and packaged in an air tight, tamper-proof sealed bottle.

DESIGN FEATURES

• Fundamental for accurate conductivity measurement.
• Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
• Sealed against light with air tight, tamper proof cap.
• Each 230 mL bottle is marked with lot number and expiration date.
• A temperature chart of the actual µS/cm value at various temperatures is printed on each bottle.
• 5 year expiry date.

MA9065 111,800 μS/cm Conductivity Calibration Solution - 230 ml Bottle by Milwaukee

The performance of conductivity probes are affected by use due to residue build up and aging.

MA9065 is a lab grade 111,800 μS/cm conductivity solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter.

Conductivity readings are effected by temperature. To help with this, a chart of the actual μS/cm value at various temperatures is printed on each bottle

Milwaukee conductivity solutions are labeled with the lot number and expiration date and packaged in an air tight, tamper-proof sealed bottle.

DESIGN FEATURES

• Fundamental for accurate conductivity measurement.
• Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
• Sealed against light with air tight, tamper proof cap.
• Each 230 mL bottle is marked with lot number and expiration date.
• A temperature chart of the actual µS/cm value at various temperatures is printed on each bottle.
• 5 year expiry date.

WB-7500-P Bottle, Plastic Wash Bottle 16oz / 500mL by AquaPhoenix

These bottles are made of translucent and low density polyethylene (LDPE). The distinguishing feature of these bottles is the built-in delivery tube which makes it a one-piece wash bottle. Graduated on the outer surface to reflect an approximate volume of solution filled or dispensed.

90433-44 Thermowell Brass, 4" Length, 3/4" Connection by Digi-Sense

To match your probe to a thermowell, first measure the distance from the probe's tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell ("A" dimension). Other thermowell sizes and materials are available - call our Application Specialists for more information.

• Limited-Space Thermowell when you need a shorter insertion depth.
• Standard Thermowell for general-purpose applications.
• Heavy-Duty Thermowell for higher fluid velocity ratings.

SS-0007-R Test Strip Station - Holds 5 rolls and 2 vials by AquaPhoenix

Made from high quality plastic. Great for keeping test strips organized, easily avaliable, and safe storage.