$100 - $150

91210-07 Traceable® Big-Digit Thermocouple Thermometer with Calibration by Digi-Sense

Thermometer reads from -58 to 2000°F and -50 to 1300°C with a resolution of 0.1° and 1°. Switch from °F to °C at the touch of a button. Easy to read big digits measure over 5/8-inch-high and are readable from 15 feet away. Unit features HOLD button that freezes display to capture current reading. MAX HOLD feature permits capturing and displaying the highest temperature achieved over any time period.

Intuitive, four-button operation makes it easy-to-use. Microprocessor updates the display 2.5 times per second. Rugged unit is constructed of shock-resistant ABS plastic. Meter only accuracy: ±0.3% of the reading plus 1°C between -50°C to 1000°C, otherwise 0.5% of the reading plus 1°C. Uses all Type-K thermocouple probes.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Carrying case, NIST-traceable calibration certificate with data, battery, and fast-response, Type-K beaded probe with 4-foot cable.

H-10-139-05 Phenol Colorimetric Gas Detection Tube, 1 - 25 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

WD-35607-53 Conductivity/TDS Cell, Glass Body, K=10 (Use with CON 100, 200, and 500 meters) by Oakton

Feature built-in temperature compensation

Each conductivity/TDS cell features a 3-ft cable and a two-band platinum sensor. Epoxy body cells have a temperature range of 0 to 80°C; glass and stainless steel body cells have a temperature range of 0 to 100°C.

• Epoxy, glass and stainless steel models available

Choose from three different cell constants.

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS).
• K = 0.1 for low conductivity measurements (near or below 20 µS)

98767-62 Traceable Ultra™ Refrigerator/Freezer Thermometer with Calibration; 2 Plastic Bottle Probes by Digi-Sense

Accurately monitor temperatures in refrigerators, freezers, water baths, and incubators. Thermometers have accuracy of ±0.5°C (-30 to 50°C). Built-in audible and visual alarms activate when temperature rises or falls below the alarm set point, and is programmable in 0.1° increments.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer comes with plastic bottle probes filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Triple display simultaneously shows MIN/MAX and current temperature|10-ft microcable allows refrigerator/freezer doors to close on it
• Temperature-buffered glycol bottle probe mimics solution

Includes

plastic bottle probes with 10-ft cable, flip-open stand, hook-and-loop strips, magnetic strips, wall mount, batteries, and NIST-traceable calibration certificate with data.

*Please note we can only ship RKI products to customers within the United States

Part Number: F111450PA

WD-00652-52 Traceable® Conductivity and TDS Standard, Individually-Tested, 10,000 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Individually-tested solutions are certified by the bottle - each bottle is analyzed for the best accuracy

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 10,000 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

120 Bacteria Tests: Test Kit for Detecting Yeast and Mold by AquaPhoenix

The growth of mold in the industrial environment is often responsible for extensive losses in productivity. When populations of mold and yeast become elevated in stored hydrocarbon fuels, metalworking fluid, and process waters, serious economic consequences can result. Problems related to high levels of mold include slime formation, offensive odors and plugging of fluid delivery lines. Effective control of these organisms through biocide use is only possible when routine monitoring of fungal levels is performed. Sani-Check YM makes routine determinations of fungal populations quick and easy. 25 tests per kit.

Preset Flow Regulator

The 400 Series single-stage, piston-style regulators are designed to deliver a preset flow of non-corrosive gases in the 17 liter or 34 liter non-refillable cylinders with CGA 600 inlets. Each regulator comes with a cylinder pressure gauge.

Part Number: 413