$100 - $150

PTP Case (Hard) for Myron L DS & pDS Analog Meters by AquaPhoenix

For all analog handheld models. Small hard foam-lined protective carry case.

163 Autoranging DMM with Bar Graph, Boot, Test Leads, and Manual by Test Products International

The 163 is a hand-held autoranging DMM. The 163 measures ACV, DCV, ACA, DCA, Resistance, Diodes and Continuity.

Features:

• Safety: Meets CE and IEC 1010 requirements. UL Listed to U.S. and Canadian Safety Standards.
• Data Hold: Holds the reading on the display.
• Range: Allows you to either manual range or use auto range to select the appropriate range.
• Auto Off: Preserves battery life. LCD shows oFF when in this mode.
• Large LCD: Easy to read at all angles and the majority of lighting levels.
• Rubber Boot: Added protection when the instrument is dropped.
• 0.5% DCV basic accuracy
• 0 to 750 ACV; max resolution 1mV
• 0 to 1,000 DCV; max resolution 0.1mV
• 0 to 32.6MΩ; max resolution 0.1Ω
• Audible continuity
• 0 to 10 amps AC/DC; max resolution 0.1uA
• Analog bar graph
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

Applications:

• Thermocouples in furnaces or gas applications
• Heat anticipator current in thermostats
• Line voltage
• Voltage of direct drive DC motors
• Control circuit voltage
• Motor run and start capacitors
• Flame safeguard control current
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring
• Continuity of circuit breakers
• Temperature with optional temperature adapter
• Bar graph to indicate rapid fluctuations in measurements

The 163 comes complete with the following accessories:

• Rubber Boot
• Test Lead Set
• Battery
• Instruction Manual

0560 1063 106 Food Thermometer by Testo

The core thermometer testo 106 with a thin, robust measuring tip, excellently suited for fast core temperature monitoring in gastronomy, in hotels, large kitchens, supermarkets etc.

• Audible and optical alarm (LED lights up)
• TopSafe (optionally or in a set), waterproof and dishwasher-safe protective case (IP 67)
• Fast measurement (2 measurements per second)
• Almost invisible penetration hole due to special food probe
• Small, handy and always close to hand
• Automatic recognition of final value (Auto-Hold)

Part Number: CG2M300103

GHS1209 Gas Cylinder Hazard Class Pictogram Label (1"), 1120/Pad by GHS Safety

Provide your employees with a quick and easy way to identify Personal Protective Equipment & Hazard Class requirements. GHS labels are manufactured on a high gloss paper stock with pressure sensitive adhesive for ease of application and longer durability. Designed to be used with you in house labeling system where color printing isn't an option.

Make clean, professional looking labels in minutes. Labels are printed in sheets and padded with a cardboard backer for ease of use. Each sheet is perforated to allow removal when completed.

Labels are sold in pads. 1" diameter labels come 1,120 labels per pad. 1/2" diameter labels come 1,820 per pad.

2319900 Hardness Reagent Set, Calmagite Colorimetric by AquaPhoenix

For determination of Calcium and Magnesium Hardness by the Calmagite Colorimetric method. Hach Method 8030. Range: 0.05 - 4.00 mg/L as CaCO3. Reagent set contains: Alkali Solution, Calcium/Magnesium Indicator Solution, EDTA Solution and EGTA Solution for 100 tests.

WD-00652-46 Traceable® Conductivity and TDS Standard, Individually-Tested, 100 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Individually-tested solutions are certified by the bottle - each bottle is analyzed for the best accuracy

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 100 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

MiSCstand MiScope Stand with Adapter Lens by Zarbeco

The MiScope stand with adapter lens is designed to lower the magnification of the MiScope to 6 - 40x and increase the field of view.

The MiScope adapter lens works with the regular MiScope models (including the MiScope; MiScope-SW; MiScope-IR; MiScope-UV). It includes a removable reducing lens which allows more of the object to be viewed and captured, and a stand which positions the MiScope at the correct height above the object.

Whenever you want to use your MiScope at lower magnification, fit the lens adapter into the plastic bottom of the MiScope and place the MiScope on the stand. MiScope not included (must be purchased separately).

Features

• Lowers magnification to 6x
• Increases field of view
• Gives additional working distance to provide access to samples
• Portable
• Includes stand, removable legs and lens
• MiScope must be purchased separately (not included)

Applications

• Forensics
• Entomology
• Field Sciences
• Quality Inspection

390 TDS/Salt Meter by Test Products International

Measure Total Dissolved Solids (TDS), salt and temperature for food, water quality and HVAC maintenance. Easy-to-read LCD display. Measures temperature, TDS concentration and salt levels in solutions.

The AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system. It is not necessary to disconnect the system in question because no contact is required for operation and current flow is not necessary to locate voltage. Simply touch the plastic tip to a connection point or move it along an insulated wire. If AC voltage is present, The AC Volt 50 will sound an audio alert and an LED light in the probe tip will glow bright red. The illumination will stop at a break in the circuit or wire, and this allows the AC sensor to be used as a troubleshooting instrument.

Applications

• Water: Test TDS levels to determine purity
• Food: Test the amount of salt in food, seafood, or processed foods
• Health: Monitor the amount of salt intake
• Water Filtration: Test for TDS to determine performance level of filtration systems
• Pools & Spas: Monitor TDS levels to prevent maintenance problems
• HVAC: Test condensate water in cooling tower and humidifier reservoir applications to prevent bacterial growth
• HVAC: Test TDS levels in make-up water to prevent scale formation, corrosion, and embrittlement
• HVAC: Reduce water and chemical consump tion in boilers and cooling towers
• HVAC: Determine when to perform blowdown and add make-up water
• HVAC: Prevent contamina tion and corrosion of control valves, heat exchangers, and steam traps
• HVAC: Verify automated TDS contollers are functioning properly
• HVAC: Prevent low quality wet steam generation in boilers due to foaming caused by high TDS levels

765PTAF Thermocouple Panel Thermometer, Type PTA, Range -58°F to 199.9°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

*Please note we can only ship RKI products to customers within the United States

293 Clamp-on Plus DMM with True RMS Capabilities by Test Products International

Digital Clamp-On Meter Amp Plus. The 293 is a clamp-on plus DMM with True RMS capabilities. The 293 offers measurements in all basic electrical functions plus:

Features:

• True RMS: Provides accurate and dependable readings of non-linear loads.
• Bar Graph: When measuring frequency, bar graph indicates current level.
• TRIM Mode: Smooths out unstable readings.
• Peak Mode: For start-up and inrush currents.
• Sleep Mode: Preserves battery life.
• Data Hold: Holds the reading on the display for easy viewing.
• Measure AC/DC volts, resistance, continuity and frequency
• CAT III 600 V rated
• cULus 61010
• 3-year limited warranty

Applications:

• Heat anticipator current in thermostats
• Line voltage
• Control circuit voltage
• Heating element resistance
• Compressor winding resistance
• Contactor and relay coil resistance
• Motor and compressor start up current
• Continuity of wiring
• Frequency on control and line voltage
• Record/Min/Max voltage of controls and line voltages
• Bar graph to indicate rapid fluctuations

The 293 comes complete with the following accessories:

• Carrying Pouch
• Test Lead Set
• Instruction Manual
• Battery

Old Part Number: 19710162VMX
New Part Number: J19711.62VM4

0554 2115 3 hose set with valve low loss 1/4" to 1/4" by Testo

The 3-hose charging set with valve is compatible with all common refrigerants and has integrated shut-off valves for precise flow control. The high-quality construction guarantees stability and durability, even in demanding conditions. Dimensions: 1/4" - 1/4" SAE, length 1.5 m.

• Compatible with all common refrigerants
• Integrated shut-off valve for precise flow control and safe handling
• High-quality construction offers excellent stability and durability, even in demanding conditions
• Thread: 1/4" - 1/4" SAE
• Length: 1.5 m

Includes:

• 3-hose charging set with valve 1/4" - 1/4" SAE

Old Part Number: 120810
New Part Number: J120810LA

Part Number: CGTR1033

*Please note we can only ship RKI products to customers within the United States

This is the equivalent of the CG-ZERO from BW

Part Number: 103L-1