$100 - $150

18005-03 USB Interface Cradle and Cable by Digi-Sense

This USB interface cradle and cable is required for use of the Traceable Temperature Data Logger. One interface should be used at each location to download data to the software (sold separately).

• For use of downloading temperature data logger data
• Cradle securely holds data Logger in place

93831-06 PFA-Ins RTD Probe, 100 Ohm, ANSI 3-Blade Connector, 4.5" L, 5ft Coil Cord by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

0590 7502 750-2 Voltage, Continuity, Phase Sequence Tester with GFCI Test & Flashlight by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

97610-50 LDM-35 Compact Handheld Laser Distance Meter by Digi-Sense

These laser distance meters are designed for high-accuracy measuring at an economical price. Compact size and simple-to-use push-button control with shortcut keys makes measuring fast and reliable.

• Measure up to 114 ft (35 m)
• Calculation of area (square footage) and volume
• Indirect measurement using Pythagoras calculation
• Continuous measurement
• Addition and subtraction of measurement
• Min/Max distance tracking
• Multiline and illuminated display

Includes

carrying case and batteries.

94124 2" UHC/LPR Filter by Celestron

Our 2" Light Pollution Reduction (LPR) Filters are designed to selectively reduce the transmission of certain wavelengths of light, specifically those produced by artificial light. This includes mercury vapor, and both high and low pressure sodium vapor lights and the unwanted natural light caused by neutral oxygen emission in our atmosphere (i.e. sky glow).

The new ultra high contrast (UHC) LPR filter has improved contrast over the typical broadband filters. Sky background is darker, and contrast of emission nebulae are noticeably improved. The advanced technology coatings enable the filter to achieve an outstanding transmission of over 97% across the entire bandpass, with total blockage of prominent light pollution lines. The perfect filter for viewing nebula from light polluted skies, or for boosting the contrast of nebula from dark sky sites.

In addition to it's optimum spectral and optical characteristics, the UHC/LPR filter offers important features that set it apart and result in the highest quality celestial views:

The multi-layer dielectric coatings are plasma assisted and Ionbeam hardened using the latest technology for durability and resistance to scratching.

Improved transmission translates to maximum image brightness and contrast. Users of smaller, 4"-11" telescopes will especially appreciate the high efficiency, and larger scope users will love the rich star fields and detailed subtle nebular shadings that are left intact.

The high transmission, sharp cutoffs, and more moderate 60nm passband of the UHC/LPR filter retains a more natural view, yet significantly boosts overall contrast. Imagers will appreciate the broader bandpass and inclusion of an extremely efficient H-Alpha passband (656nm).

90496-03 Adjustable Angle Bimetal Thermometer, 3" Dial, 24" L/50-300F/10-150C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

90496-02 Adjustable Angle Bimetal Thermometer, 3" Dial, 24" L/25-125F/-5-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

S653/15/BNC Cable Assembly, 15ft (3M), BNC by Sensorex

With threading for submersion mounting, the S653 Cable Assembly is the perfect complement to our S651CD Submersible Electrode series. This cable assembly is designed to submerge the electrode in tanks, flumes and sewer lines. The cost-effective CPVC construction is well suited for most water and wastewater applications. Pairing the S653 Cable Assembly with an S651CD series Electrodes allows for quick electrode changes, drastically reducing downtime due to maintenance.

• Use with one of our S651CD series Electrodes for quick and easy maintenance
• Threading design for fast and simple installation
• Durable CPVC design is suitable for most applications
• One year limited warranty

90490-01 Adjustable Angle Bimetal Thermometer, 3" Dial, 2.5" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw