$100 - $150

*Please note we can only ship RKI products to customers within the United States

7402-LED Hazardous Location Battery Operated Flashlight by Western Technology

A versatile waterproof spot light with a wide range of applications, including use in gassy mines. The 7402 LED Intrinsically Safe Flashlight is the perfect addition to any job site featuring a wrist lanyard connection and a spring-loaded clip.

Features

• Features a wrist lanyard connection and a spring-loaded clip
• Powered by 3 C alkaline batteries
• Up to 3500 candela (Peak Beam Intensity) (44 lumens typical)
• Waterproof
• Div 1 - Runs 4 hours continuous at full intensity. Up to 15 hours to 50% output intensity. Up to 24 hours to 25% output intensity
• Div 2 - runs 5.5 hours continuous at full intensity. 2 additional hours of declining output
• Rubber booted, tail-end push button switch
• Length: 9.30" Weight: 14.6 oz Colors: Yellow or Black
• MSHA Permissible for use in gassy mines, Methane/air only. Class 1 & II, Div 1, Groups C,D,F & G; Class 1,Div 2,Groups A,B,C,D; Class III, T4

LabSen 231 Glass-body pH Electrode for Wastewater, Suspension, Emulsion by Apera

Backed by proprietary Swiss sensor technology and materials, the LabSen 231 Combination pH Electrode is ideal for testing emulsion, suspension, wastewater, and samples containing protein and sulfide. Its 2-pore double junction structure and solid electrolyte make it hard to be contaminated and highly resistant to compression.

• Long-Life Reference System - The LabSen 231 pH electrode adopts a long-life reference system, which is composed of a glass tube, AgCl and a reference silver wire. The top end of the slim glass tube is stuffed with cotton, which prevents the reaction between AgCl and electrolyte when the temperature changes. It improves the stability of reference electrode and extends the service life of the electrode.
• Polymer Electrolyte - The polymer electrolyte is in direct contact with test samples. The anti-pressure capacity can reach up to 6 bars, making it ideal for testing suspension and wastewater.
• Special Glass Membrane - The LabSen 231 pH electrode adopts a hemispherical glass membrane, which is highly resistant to general impact (the traditional glass bulb membrane is a lot more fragile), and can be tested in high-temperature samples (up to 176°F).

AJDR0 Draft Probe for Simultaneous Draft + Combustion at Different Locations by Seitron Americas

The Draft Probe for NOVO analyzers allows for draft measurement at a different location from the flue gas analysis point. It comes with connectors, a tip (length: 180 mm; diameter: 8 mm), and a silicone hose (length: 1.8 m).

The NOVO flue gas analyzer can simultaneously measure both the flue gas composition and draft using the standard flue gas probe. However, the optional Draft Probe accessory enables users to perform draft measurement at a different location from the flue gas analysis point.

TS3000-G TISAB II, 4L by AquaPhoenix

• APHA for Fluoride, 4500-C

Specifications

• Packaging Type: Poly
• Size: 4.00 L

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

PH6000 Comb pH Sensor, 10 FT, Clear BTD BNC by Sensorex

The pH6000 is a light duty pH probe for continuous monitoring of surface water and ground water, including environmental and industrial source water monitoring. The durable Ultem® body permits use in the field, while conferring chemical compatibility. Double junction reference protection allows use in environments that contain reference fouling contaminants, including heavy metals. Fully integrated cable comes in a 10 foot (3 meter) standard length, with custom cables available by request.

• Durable and low maintenance: Ultem® body construction, reinforced meter connection, and sealed reference design
• Allows monitoring in variable chemical environments: Double junction reference protection prevents reference cell contamination
• Accurate measurements across full pH scale (0-14)
• Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
• Compatible with any meter accepting a BNC connector
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

Part Number: W03-3044-000

HX1000-Q Hexane (n-Hexane), ACS, 1L by AquaPhoenix

• APHA for Oil & Grease, 5520-B, D
• CAS No. 110-54 3
• CH3(CH2)4CH3Hexane/UN1208

Specifications

• Packaging Type: Glass
• Size: 1.00 L

90550-71 Dampen Adjustable Angle Bimetal Thermometer 5" Dial 2.5" L Range 0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments

90447-13 RTD Probe 1/8" OD 9" Length Miniature Plug by Digi-Sense

Resistance Temperature Detectors, or RTDs, are used in many process and laboratory applications where accuracy and repeatability are of prime importance. RTD elements are available in many different materials and with different temperature coefficients. The most commonly used element is a wire-wound platinum element, conforming to the DIN standard and with a .00385 temperature coefficient.

Key Features

• All probes are low range
• 316 stainless steel sheath material
• Extension leadwire transition with relief spring (350,°F)
• 3-wire RTD, 100 Ω
• Accuracy ±0.1%
• -328 to 400°F (-200 to 204°C)
• .00385°C temperature coefficient
• Constructed using PTFE Insulated silver plated copper internal leads

08009-59 ASTM Like Liquid-In-Glass Thermometer, 113F / Softening Point, (Bitumen) Wide Range, Total Immersion, 0 to 350F, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

6410 Petrifilm, Coliform Count Plates, 50 plates by AquaPhoenix

3M™ Petrifilm™ Coliform Count Plates are sample-ready to identify coliform levels in - raw materials - in-process/finished food products - plant environment/equipment. Confirmed coliforms are red colonies which are associatated with gas bubbles. Benefits: Utilizes the convenience and efficiency of the 3M™ Petrifilm™ Plate platform. Proven cost effective tool for the detection of coliform. Results in as few as 22 hours. Results can be read in 4 seconds using the 3M™ Petrifilm™ Plate Reader.

08009-04 ASTM Like Liquid-In-Glass Thermometer; 5F / Cloud and Pour, 108mm Immersion, -36 to 120F, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

08113-28 Flexible Thermocouple Probe, PTFE Insulated Wire, 23G, Ungrounded, Stripped Leads, Type K; 36" L by Digi-Sense

Fiberglass wire is not recommended for use in moist or wet environments.

Exposed-junction probes are not recommended for use with aqueous solutions.

Do not subject type J exposed-junction probes to moisture as they will rust

• Response Time: 1 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped leads.
• Custom designs or changes to this product are available upon request

08081-03 TI.32 4 Silicone Filled Adjustable Angle Bimetal Thermometer, 3" Dial, 4" L/50-300F/10-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases).

Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

Key Features

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

18520-30 Type T Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 18" L, .250 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

90446-37 Probe Type-J 14" L 1/4" CP-Series PTFE by Digi-Sense

Magnesium Oxide insulated thermocouples, commonly referred to as MgO thermocouples, are used in many process and laboratory applications. Many desirable characteristics make them an excellent choice for general and special purpose applications. They are available in all thermocouple element types, single or dual elements, a wide variety of sheath diameters / materials, rugged in nature, bendable, and have fairly high temperature ratings.

• 316 stainless steel sheath