$100 - $150

94400-64 Traceable® Walkaway Count-Up Controller with Calibration; 1 sec to 99 hrs by Digi-Sense

Controllers perform reproducible stirring, heating, or pumping times. Used for timed shutdown or repeated on/off timing during any test. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal NiCd battery maintains programs in the event of a power outage. Three-pronged grounded receptacle relay for apparatus to 115 VAC, 115 amps, 1800 watts, and 1/3 horsepower.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94400-64 repeat turn-on/turn-off controller counts up and turns any piece of equipment on for a programmed time and off for a different programmed time. Repeat features automatically continues cycling on and off programmed times ntil manually stopped. Programmable for separate on and off timing periods in three interval setting: 1 second to 99 seconds; 1 minute to 99 minutes, and 1 hour to 99 hours.

• Program setting in less than 5 seconds
• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

93830-48 Type J Grounded Industrial Thermocouple Probe, 4" Length, 1/2" Connection by Digi-Sense

Thermocouple Probes Assemblies are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 20 gauge wire encased by ceramic insulators along with a standard size aluminum protection head. Head features a gasketed cap to seal out dust and moisture and houses a ceramic terminal block with screw terminals. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

90446-73 Probe Type-J Inconel 6" L Aluminum Heads by Digi-Sense

These MgO thermocouple assemblies consist of a single or dual thermocouple element constructed of various sheath materials, assembled together with a connection head.

Features

• Inconel, 316 Stainless steel or 304 Stainless steel sheath materials
• 1/2" X 1/2" NPT stainless steel hex nipple for head mounting fittings
• Aluminum screw cover, Cast iron screw cover, or Cast iron/aluminum explosion proof class C Heads
• Standard Limits of Error
• Grounded Measuring Junction
• Custom built assemblies available upon request

90550-35 Dampened Adjustable Angle Bimetal Thermometer, 3" Dial, 2.5" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

90550-40 Dampened Adjustable Angle Bimetal Thermometer, 3" Dial, 6" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

90494-01 Adjustable Angle Bimetal Thermometer, 3" Dial, 12" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

GHS1053 Flextop Wall Chart (24" x 36") by GHS Safety

HazCom GHS Information Wall Chart provides a comprehensive overview of new HazCom GHS labelling requirements printed on a durable and rigid, 1/8" thickness plastic material called Flextop. The chart details the 3 main hazard groups: Physical, Health & Environmental. The requirements for supplier labels when decanting or transferring hazardous chemicals; visual representations of the precautionary statement pictograms; and a list of the information required on a Safety Data Sheet. Flextop version of HazCom GHS information Wall charts allow for easy mounting on uneven or difficult surfaces and still maintain a smooth flat surface in your facilities where HazCom GHS refresher information is needed. Indoor or outdoor applications. Available in 24" x 36" with 4 pre-drilled mounting holes.

Measuring Range: -50 to +80°C

90550-88 Dampen Bottom-Con Bimetal Thermometer 5" Dial 6" L Range 50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments

H-10-132-10 Amines Colorimetric Gas Detection Tube, 0.5 - 10 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

99220LED LED Flashlight - Rechargable, 220 Lumens by Western Technology

Built for the toughest job sites in the industry The Spotter 99220LED Rechargeable Flashlight is the best LED flashlight of its kind. Perfect for temporary job sites where permanent lighting isn't ideal.

Features

• Rechargeable LED Flashlight
• Run Time: 2 hours
• Rated with Optics: 220 Lumens
• Projection distance: 300m
• Comes with both AC/DC Charger
• Optional Holster Available