$100 - $150

2446600 Oxygen Scavenger Reagent Set (Hach), includes DEHA Reagents 1 and 2 by AquaPhoenix

For determination of oxygen scavengers by the iron reduction method. Hach method 8140 determines carbohydrazide, diethylhydroxylamine (DEHA), hydroquinone, iso-ascorbic acid (erythorbic acid) and methylethylketoxime. Set contains DEHA 1 Reagent Powder Pillows and DEHA 2 Solution for 100 tests

*Please note we can only ship RKI products to customers within the United States

AQ100FX-25PK Hygiena AquaSnap Free ATP Water Pen, 25 pack by AquaPhoenix

AquaSnap is an all-in-one sampling device for ATP detection in liquid samples. AquaSnap features a dipper collection tip, coated with an agent to aid in sample collection and ATP extraction for repeatable and accurate results. AquaSnap Free measure non-microbial ATP.

• Results in 15 seconds
• Easy-to-use - just collect, snap and squeeze!
• Self-contained, liquid-stable reagent offers reliable results
• Patented Snap-Valve technology provides unprecedented accuracy and reproducibility
• 100 μl dipper enables more consisten sample collection than swab or sponge tips
• Tolerant to temperature abuse and sanitizers

K-7376 COD Vials, 0-15,000 ppm (HR+) Mercury-free, 98 vials by AquaPhoenix

All COD Kits require the use of a Digestor Block and the V-2000 Photometer, an A-7325 COD Photometer, or a spectrophotometer capable of accepting a 16 mm round cell. Photometers sold separately.

A fresh reagent ampoule blank must be prepared for each series of tests; therefore the number of samples that can be tested with each kit will vary.

90447-38 RTD Probe 1/4" OD 8" Length Standard Plug by Digi-Sense

Resistance Temperature Detectors, or RTDs, are used in many process and laboratory applications where accuracy and repeatability are of prime importance. RTD elements are available in many different materials and with different temperature coefficients. The most commonly used element is a wire-wound platinum element, conforming to the DIN standard and with a .00385 temperature coefficient.

Key Features

• All probes are low range
• 316 stainless steel sheath material
• Extension leadwire transition with relief spring (350,°F)
• 3-wire RTD, 100 Ω
• Accuracy ±0.1%
• -328 to 400°F (-200 to 204°C)
• .00385°C temperature coefficient
• Constructed using PTFE Insulated silver plated copper internal leads

18526-62 Economic Cryogenic Probe, 100 Ohm, 6" L, 3 Pin, .188 Dia, 5ft FEP by Digi-Sense

Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Temperature ranges from -321°F - +300°F (-196°C to - +150°C)
• Time Constant: 3 seconds or greater
• Maximum error for probe assembly is ±1.1°C + 0.35% of reading below 300°F,. Alpha coefficient is 0.003850 U/U/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 omega.
• Custom designs or changes to this product are available upon request

MH-32-TTC 32,000 BTU LP Tank Top Heater - Variable Output by Master

Master's MH-32-TTC Propane Tank Top Heater is an easy and cost-efficient way to heat spaces up to 800 sq. feet. Mounted directly to the top of a 20lb Propane tank, this space heater takes up very little space, and installation is simple.

All Master Tank Top Heaters come with 3 heat settings, a tip-over safety shut-off and front and rear safety guards. A hose and regulator are also included.

• 3 Heat settings
• Radiant style heat
• Match light ignition
• Burner swivels and tilts to direct heat towards user
• Wind resistant
• Safety tip-over switch
• Hose and regulator included

90550-46 Dampened Adjustable Angle Bimetal Thermometer, 3" Dial, 24" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

90550-36 Dampened Adjustable Angle Bimetal Thermometer, 3" Dial, 2.5" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

37804-14 Data Acquisition Software with USB Cable; For 91210-05, 03313-88, and 98767-12 by Digi-Sense

Complete Data Acquisition Software enables you to display and store measurement readings on your PC from up to 8 devices at a time. Data capture runs in the background, enabling you to work on other programs, simultaneously. Set audible and visual notification alarms or immediately send an email if a over/under condition occurs. The software can be used to connect a meter directly to your PC via cable, or coupled with the Digi-Sense Wireless Radio-Signal Transceiver Kit (37804-12). Check software specification tables for meter compatibility, or contact our application specialists if you have a meter with RS-232 output not listed in the tables.

• Compatible with any PC with Windows®
• Compatible with items 91210-05, 03313-88, and 98767-12

Includes

software CD and 6-ft cables (USB, serial, and instrument connections).

CY-7100-M Cylinder, Glass 100mL (mixing cylinder with stopper) by AquaPhoenix

Cylinder, Graduated, Mixing, Glass, 100 mL ±0.6 mL, 1.0 mL divisions, glass stopper #16

This glass graduated cylinder is calibrated "to contain" with a molded in base. Each includes glass penny head stopper. Graduations are in durable white enamel bake.

90551-10 Adjustable Angle Bimetal Thermometer, 5" Dial, 4" L; Range 25-125°F/-5-50°C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

*Please note we can only ship RKI products to customers within the United States

HP-22MR10BL High Pressure Blue Mist Ring 22" OD, 10 Nozzles, 12-24 Thread, w/o Nozzles by Schaefer

Turn any fan into a satellite evaporative cooling fan by adding misting attachments and make air movement a super cool breeze! Easy to install. Simple to use. Nozzles available individually or in packs of 4 or 6.

Satellite fans require a master base system with a high pressure pump.

CS150-K=1/BNC Light-Duty Contacting Conductivity / TDS Sensor with Automatic Temperature Compensation (ATC), Graphite, 12mm, K=1.0, BNC by Sensorex

The CS150 and CS150TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications.

Sensors feature measuring surfaces. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. Suitable for use with most portable conductivity meters.

By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank.

Features:

• Ideal for laboratory and light duty process applicationsAvailable with or without ATC (temperature sensor)
• Easy to submerge in a tank or mount inline in a pipe
• Cell constant choices of 0.1 or 1.0
• Compatible with most portable and benchtop meters

90550-88 Dampen Bottom-Con Bimetal Thermometer 5" Dial 6" L Range 50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments