$100 - $150

768KF-02 Panel Mount Digital Thermometer with Analog Voltage Output, Type K, Range -2 to 752 °F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.5% of span ± 1 digit, features a bright red LED display and 1/8 DIN plastic housing. Available in types. J or K with 4 available temperature ranges per type, specify degrees °C or °F. Ambient range 0 to 40°C. 115/230V AC operation.

RX1 Single Outlet Relay for GC-Pro/XL, 120V 12A by Agrowtek

RX1 relay plugs into a standard wall outlet and switches its outlet on when 24Vdc is supplied to the 'trigger' terminals (relay coil.) Mount the RX1 in any wall outlet and plug equipment to be controlled into the RX1.

To operate the RX1 the trigger is connected to any desired output on the GC-Pro controller. To operate the RX1's trigger input from a 120V outlet on the GC-Plus or other controlled outlet use the RX-T trigger cord kit.

Features

• Wire direct to GC-Pro outputs
• 24Vdc Relay coil voltage
• Removable terminal block for trigger wires
• Heavy duty UL flame rated enclosure
• Fully grounded with securing screw tab
• 15A / 120Vac rated
• 2-Year full factory warranty Made in USA

0516 4401 Combo Case for Testo 440 and Several Probes by Testo

The combi-case is ideal for transporting and protecting your equipment.

You can use this case to safely store the following:

• testo 440 or testo 440 dP air velocity and IAQ measuring instrument
• Vane probe (Ø 4 in.) with universal handle (alternatively, turbulence probe or fume hood probe with fixed cable)
• 90° angle for connecting vane probes (Ø 4 in.) for measurements at ceiling outlets
• Either the vane probe (Ø 0.6 in.) or hot wire probe (each with fixed cable), or extendable telescope for air velocity probes with universal handle
• Hot wire or Ø 0.6 in. vane probe head
• Humidity, CO₂, or CO probe (each with universal handle) or high-precision humidity/temperature probe with fixed cable
• Lux probe
• Batteries

• Fits the testo 440 standard or dP model
• Dimensions: 20.3 x 5.3 x 10.1 inches (W x H x L)

Includes:

Combi-case for storing the testo 440, with room for multiple probes

99220LED LED Flashlight - Rechargable, 220 Lumens by Western Technology

Built for the toughest job sites in the industry The Spotter 99220LED Rechargeable Flashlight is the best LED flashlight of its kind. Perfect for temporary job sites where permanent lighting isn't ideal.

Features

• Rechargeable LED Flashlight
• Run Time: 2 hours
• Rated with Optics: 220 Lumens
• Projection distance: 300m
• Comes with both AC/DC Charger
• Optional Holster Available

Part Number: GAMAXCKCC

94400-64 Traceable® Walkaway Count-Up Controller with Calibration; 1 sec to 99 hrs by Digi-Sense

Controllers perform reproducible stirring, heating, or pumping times. Used for timed shutdown or repeated on/off timing during any test. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal NiCd battery maintains programs in the event of a power outage. Three-pronged grounded receptacle relay for apparatus to 115 VAC, 115 amps, 1800 watts, and 1/3 horsepower.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94400-64 repeat turn-on/turn-off controller counts up and turns any piece of equipment on for a programmed time and off for a different programmed time. Repeat features automatically continues cycling on and off programmed times ntil manually stopped. Programmable for separate on and off timing periods in three interval setting: 1 second to 99 seconds; 1 minute to 99 minutes, and 1 hour to 99 hours.

• Program setting in less than 5 seconds
• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

pH1400 Light Duty Glass pH Electrode, 39 Inch (1M), Blue BNC (Entry Sheet to Eric 7/25) by Sensorex

The pH1400 glass pH sensor is easy to use and performs reliably in applications such as hydroponics, gardening, and education.

Features:

• Maximum chemical compatibility with inert glass bodies
• Highly adaptable: Compatible with any meter accepting BNC
• Choose basic, advanced, or premium options based on your application
• Accurate and reliable measurements across full pH scale (0-14)
• Instantly ready for use: Extended shelf life (guaranteed for one year)
• One year limited warranty

94400-62 Traceable® Walkaway Count-Up Controller with Calibration; 0.01 sec to 99 hrs by Digi-Sense

Controllers perform reproducible stirring, heating, or pumping times. Used for timed shutdown or repeated on/off timing during any test. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal NiCd battery maintains programs in the event of a power outage. Three-pronged grounded receptacle relay for apparatus to 115 VAC, 115 amps, 1800 watts, and 1/3 horsepower.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94400-62 turn-off controller counts up and turns any piece of equipment off at the end of a set time period. Programmable in three interval settings: .01 second to 99.99 seconds, 1 minute to 9999 minutes, and 1 hour to 9999 hours.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Program setting in less than 5 seconds

Includes

NIST-traceable calibration certificate with data.

Part Number: 34L-78-500

H-10-133-03 Ozone Colorimetric Gas Detection Tube, 0.05 - 0.6 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

6400 Petrifilm, Aerobic Count Plates, 100 plates by AquaPhoenix

3M™ Petrifilm™ Aerobic Count Plates (U.S. AOAC®) are sample-ready to use and help determine total aerobic bacteria populations in testing processes. The indicator dye and built in grid allows for fast accurate identificaiton of colonies, within 48 hours. A survey of 274 plants who converted to 3M™ Petrifilm™ Plates from traditional agar methods found an average labor savings of 45% and an average increased technician efficiency of 80%. Our full line of easy-to-use 3M™ Petrifilm™ Plates can provide you with many benefits over traditional methods. In addition, 3M™ Petrifilm™ Aerobic Count Plates can be used to aerobically or anaerobically enumerate lactic acid bacteria in food and environmental samples.

Part Number: 75-4260

SI1020-J Sodium Iodide, ACS, 100gm by AquaPhoenix

• CAS No. 7681-82-5
• Nal FW=149.89

Specifications

• Packaging Type: Poly
• Size: 100 gram
• Grade: ACS

08133-02 TI.31 6 Bottom-Mount Bimetal Thermometer, 3" Dial, 6" L/25-125F/-5-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw