$100 - $150

08113-29 Flexible Thermocouple Probe, PTFE Insulated Wire, 23G, Ungrounded, Stripped Leads, Type T; 36" L by Digi-Sense

Fiberglass wire is not recommended for use in moist or wet environments.

Exposed-junction probes are not recommended for use with aqueous solutions.

Do not subject type J exposed-junction probes to moisture as they will rust

• Response Time: 1 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped leads.
• Custom designs or changes to this product are available upon request

Part Number: 34L-333

WD-00652-20 Traceable® Conductivity and TDS Standard, Batch-Tested, 1 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Batch-tested solutions are lot certified; a few bottles from a single lot are analyzed

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 1 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

93830-05 Magne-Couple Type K Industrial Probe, with 3" Pigtail by Digi-Sense

Magne-Couple is a thermocouple designed for temporary surface monitoring of any ferrous surface. It attach's to the surface by utilizing a powerful Alnico Magnet with a holding force of 16 lbs, and is capable of withstanding up to 1000 degrees F without degradation. The magnet forces the spring loaded sensing tip into contact with the surface being monitored.

08009-51 ASTM Like Liquid-In-Glass Thermometer, 89C / Solidification Point, 76mm Immersion, -20 to 10C, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

GLUT-WT Glutatect WT Test Kit, 20-100 ppm by AquaPhoenix

• 20-100 ppm, 30 ampoules

The Glutatect WT Test Kit measures glutaraldehyde utilizing a 5 minute test procedure and measures 20 to 100 ppm glutaraldehyde "activities."

6400 Petrifilm, Aerobic Count Plates, 100 plates by AquaPhoenix

3M™ Petrifilm™ Aerobic Count Plates (U.S. AOAC®) are sample-ready to use and help determine total aerobic bacteria populations in testing processes. The indicator dye and built in grid allows for fast accurate identificaiton of colonies, within 48 hours. A survey of 274 plants who converted to 3M™ Petrifilm™ Plates from traditional agar methods found an average labor savings of 45% and an average increased technician efficiency of 80%. Our full line of easy-to-use 3M™ Petrifilm™ Plates can provide you with many benefits over traditional methods. In addition, 3M™ Petrifilm™ Aerobic Count Plates can be used to aerobically or anaerobically enumerate lactic acid bacteria in food and environmental samples.

GHS2022 HazCom Audit Guide by GHS Safety

Hazcom 2012/GHS guidebook will help you measure your HazCom compliance. Easy to understand, and easy to follow, it's an essential companion for any safety and health professional. Audit guidebook takes you through the major milestones for Hazcom compliance and chemical safety.

Written and prepared by experts it draws on more than 30 years of experience in chemical hazard communications and training. This 70 page guide covers aspects of compliance you've probably never thought about.

Like any professional audit, it attributes a score to each part of your compliance effort. In this way you can see where you're doing well and where you need to improve.