X9

90452-05 Precision Industrial PRT, 0.187" x 9", -60~160C, Spade by Digi-Sense

AM1610 Series - Precision industrial PRT/RTD probes: Conform to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Manufactured using a special aged and tested 5mm long sensing element to achieve the best performance in stability and repeatability. All have an accuracy of 35 mK at 0°C and short-term stability of 10 mK at 0°C. The AM1610 has a temperature range of -60 to 160°C (-76 to 320°F)

6510C Ground Tent 10' x 10' x 9' High, Yellow/White by Pelsue

D-Series tents are highly durable and portable general purpose work tents. Most importantly they feature inter-connectable flaps that allow two tents to be attached together, once attached entrance can be gained through the flaps. D-Series tents may be combined with DRAD tents which feature a rear access door if desired. This makes D-Series tents perfect for situation where you want separate but connected work-spaces. As with all Pelsue tents the primary fabric is water, mildew, UV, and flame retardant (to CPAI-84).

Includes:

• One-piece, instant set up
• No loose parts
• Two screened windows (most models)
• Tie-down cords through hubs
• Ground flaps for weight anchoring
• Rubber, non-slip feet
• Exterior, roof level D-rings
• Carry case & three tent stakes
• Heavy duty frame
• Wide open front
• Snap and D-rings with interconnecting flaps (connects 2 tents together)
• Ventilation hose entry sleeve
• Interior and exterior roof line loops for tie down
• Tent Stabilizing Feet (6510C only)

90452-04 Precision Industrial PRT, 0.187" x 9", -60~160C, Bare Wire by Digi-Sense

AM1610 Series - Precision industrial PRT/RTD probes: Conform to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Manufactured using a special aged and tested 5mm long sensing element to achieve the best performance in stability and repeatability. All have an accuracy of 35 mK at 0°C and short-term stability of 10 mK at 0°C. The AM1610 has a temperature range of -60 to 160°C (-76 to 320°F)

90452-17 Precision Industrial PRT, 0.187" x 9", -60~300C, Spade by Digi-Sense

AM1620 Series - Precision industrial PRT/RTD probes: Conform to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Manufactured using a coil suspension element design for increased shock and vibration resistancealong with flexibility and durability. All have an accuracy of 35 mK at 0°C and short-term stability of 10 mK at 0°C. The AM1620 has a range of -60 to 300°C (-76 to 572°F)

90452-37 Secondary Reference PRT, 0.187" x 9", -60~300C, Spade by Digi-Sense

AM1730 - Secondary reference PRT/RTD probes: These probes are the workhorse of laboratories. With a calibration uncertainty at 0°C of just ±0.015°C, these probes fully meet ITS-90 criteria for reference thermometers fully. The unique design achieves an excellent balance between hysteresis effect and mechanical/thermal shocks. Both series boast very low short term stability of 7 mK at TPW. The AM1730 has a range of -200 to 420°C.

• Equivalent to Fluke Calibration / Hart Scientific Model 5615 and 5616

90452-16 Precision Industrial PRT, 0.187" x 9", -60~300C, Bare Wire by Digi-Sense

AM1620 Series - Precision industrial PRT/RTD probes: Conform to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Manufactured using a coil suspension element design for increased shock and vibration resistancealong with flexibility and durability. All have an accuracy of 35 mK at 0°C and short-term stability of 10 mK at 0°C. The AM1620 has a range of -60 to 300°C (-76 to 572°F)

90452-36 Secondary Reference PRT, 0.187" x 9", -60~300C, Bare Wire by Digi-Sense

AM1730 - Secondary reference PRT/RTD probes: These probes are the workhorse of laboratories. With a calibration uncertainty at 0°C of just ±0.015°C, these probes fully meet ITS-90 criteria for reference thermometers fully. The unique design achieves an excellent balance between hysteresis effect and mechanical/thermal shocks. Both series boast very low short term stability of 7 mK at TPW. The AM1730 has a range of -200 to 420°C.

• Equivalent to Fluke Calibration / Hart Scientific Model 5615 and 5616

90452-19 Precision Industrial PRT, 0.187" x 9", -60~300C, 5-Pin Din by Digi-Sense

AM1620 Series - Precision industrial PRT/RTD probes: Conform to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Manufactured using a coil suspension element design for increased shock and vibration resistancealong with flexibility and durability. All have an accuracy of 35 mK at 0°C and short-term stability of 10 mK at 0°C. The AM1620 has a range of -60 to 300°C (-76 to 572°F)

90452-39 Secondary Reference PRT, 0.187" x 9", -60~300C, 5-Pin Din by Digi-Sense

AM1730 - Secondary reference PRT/RTD probes: These probes are the workhorse of laboratories. With a calibration uncertainty at 0°C of just ±0.015°C, these probes fully meet ITS-90 criteria for reference thermometers fully. The unique design achieves an excellent balance between hysteresis effect and mechanical/thermal shocks. Both series boast very low short term stability of 7 mK at TPW. The AM1730 has a range of -200 to 420°C.

• Equivalent to Fluke Calibration / Hart Scientific Model 5615 and 5616

90452-07 Precision Industrial PRT, 0.187" x 9", -60~160C, 5-Pin Din by Digi-Sense

AM1610 Series - Precision industrial PRT/RTD probes: Conform to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Manufactured using a special aged and tested 5mm long sensing element to achieve the best performance in stability and repeatability. All have an accuracy of 35 mK at 0°C and short-term stability of 10 mK at 0°C. The AM1610 has a temperature range of -60 to 160°C (-76 to 320°F)