Valve

Part Number: 909D

CO2 Solenoid Diaphram Valve by Milwaukee

Includes flow regulator, needle valve, electronic solenoid & bubble counter. Unit comes with dual gauges each with dual reading of both psi & kg/cm. Left gauge meters tank capacity and right gauge meters flow. Needle valve flow control provides for precise measurement.

The solenoid valve comes with a 1.5 meter power cord. (CO2 bottle is not included)

Recommended best if used with our MC122 pH Controller.

SXL-DVX1 Drain System with Valve by Agrowtek

Electronic optical "liquid level control system" includes two liquid sensors for high and low "fill" or "drain" control of fluids in tanks, reservoirs, etc. Only power and a valve or relay is required to complete the level control system; no external controller required. Easy to wire and setup. Includes one standard and one latching sensor. Compatible with 5-24Vdc valves and relays. Available with optional VX1 water valve kit or RX1 outlet kit for direct operation of 120Vac pumps, valves and other equipment.

SXL-FVX1 Fill System with Valve by Agrowtek

Electronic optical "liquid level control system" includes two liquid sensors for high and low "fill" or "drain" control of fluids in tanks, reservoirs, etc. Only power and a valve or relay is required to complete the level control system; no external controller required. Easy to wire and setup. Includes one standard and one latching sensor. Compatible with 5-24Vdc valves and relays. Available with optional VX1 water valve kit or RX1 outlet kit for direct operation of 120Vac pumps, valves and other equipment.

VX12i Digital Intelligent Irrigation Valve Controller with Moisture Inputs by Agrowtek

Versatile IO module with eight (8) 1-Amp transistor (FET) outputs and four (4) analog inputs selectable for 0-5V or 0/4-20mA. Six (6) of the outputs are capable of 1kHz PWM. Ideal for operating DC powered devices, relays & contactors, etc. PWM functions for integration with dimmable lighting, variable speed fans & motor controllers. Analog inputs allow SXL liquid sensor connectivity and other third-party sensor integration.

Red LED indicator lights turn on when outputs are activated. Includes standard 1/2" EMT knock-outs for conduit installation. Compatible with 12-24Vdc power supply.

Digital GrowNET™ port allows MODBUS protocol control on RS485 bus networks for custom applications. Made in USA.