Tetra

Tetra ozone flow plate

Tetra Confined Space/Communciations and Calibration Kit contains calibration plate, portables PC software, IR reader, harness plate, chest harness, shoulders strap, pc interface and hard shell carrying case with foam inserts, Crow-mag, 58 ltr calibration gas, .5 LPM regulator and gas carrying case

Tetra Bench Holder

Calibration Flow Plate for Non-pumped Tetra

Tetra 3 Battery Support Tray

SP17Y L/Y SOCTCHLITE TETRA BAR

Tetra Manual Brazilian Portuguese

Tetra Manual German

Tetra Manual Dutch

Tetra Manual Italian

TETRA BARS,REFLEXITE,PKGD,RED ORANGE

Spare Tetra pump and sensor plate assembly

Are your workers constantly trashing their gas monitors by leaving them out in the rain, dunking them in water, or dropping them on the ground resulting in costly repairs?

Then the ultra rugged Tetra is your solution. It's a Multi-Gas monitor with a built in internal pump. What separates the Tetra from other Multi-gas instruments is its NEMA 4X construction that prevents dust and water from entering the instrument. In fact the Tetra is sealed so tightly that if it is dropped in water it will float for up to 20 minutes. Just retrieve the instrument and its good to go unlike other monitors that would require a trip back to the factory, resulting in a costly repair bill. The Tetra also contains a flexible internal assembly, meaning that when the unit is dropped the shock is absorbed by the casing rather than the boards and sensors. If you've ever been unfortunate enough to have this happen to you with other gas monitors, and had to pay for 4 replacement sensors because of sheared off pins and cracked boards, then you'll instantly recognize just how valuable a feature this is. Now your probably thinking that a Multi-Gas monitor with an internal pump that boasts features that $2,500 monitors don't have has got to be expensive. Shockingly, the Tetra is not only the most rugged Multi-Gas instrument with internal pump on the market, but also one of the lowest priced.

Features

• One button operation. Works just like a computer mouse. Either single click or double click. No complicated functions to learn allows workers to start using the Tetra almost instantly.
  
• 12 hours of operation. No more instruments going dead at the end of a work shift
  
• 30 day calibration timer. Never again forget to calibrate and risk a large OSHA fine
  
• Field changeable intelligent sensor modules allows you to replace sensors without having to send the unit in for repair
  
• Rechargeable Lithium Ion or AA Alkaline versions available
  
• Rubberized casing to absorb shock, and keep dust and water out
  
• Loud and bright - 90 dba audible alarms and Red/Blue high intensity LED visual alarms will get noticed by your workers
  
• Internal Vibrating alarm at no charge
  
• TWA (time weighted average) and STEL (Short Term Exposure Limit) alarms. Now you can monitor for these two important levels set by OSHA. This is usually a costly extra feature on other monitors
  
• Datalogging capability - can be downloaded to a computer via infrared connection for doing reports and data analysis
  

TETRA BARS,REFLEXITE,PKGD,LIME YEL.

Tetra manual American

Tetra Manual Spanish

Tetra Manual French

SP17R R/O SCOTCHLITE TETRA BAR

TET01 Tetra Personal MultiGas Monitor, Rechargeable with Pump by Crowcon

Tetra is a flexible multigas monitor for the detection of flammable gases, oxygen and a wide range of toxic gases. Available in rechargeable or disposable battery format and with or without an internal pump, it is used extensively in the utilities, chemicals and hydrocarbon processing markets.

Intrinsically safe, Tetra is one of the only portable gas detectors with embedded software designed to the exacting requirements of IEC 61508-3, guaranteeing reliable and dependable operation.

Simple

• Single button operation
• Easy to read backlit display for gas readings and diagnostics
• Clear calibration due warning
• Rechargeable Li-ion battery gives 12 hours of continuous operation

Alarms

• Loud 94dBA audible alarm
• Ultra bright dual red/blue visual alarm
• Vibrating alarm

Robust

• Rugged plastic housing with flexible internal assembly to resist shock and vibration
• Durable over moulded rubber for added protection
• Water and dust resistant to IP65

Flexible

• Optional built-in pump
• Rechargeable and alkaline battery versions available
• Compatible with Crowcon Portables PC Software
• Fully interchangeable intelligent sensor modules

TET-01-A Tetra Personal MultiGas Monitor with Pump/Alkaline Batteries by Crowcon

Tetra is a flexible multigas monitor for the detection of flammable gases, oxygen and a wide range of toxic gases. Available in rechargeable or disposable battery format and with or without an internal pump, it is used extensively in the utilities, chemicals and hydrocarbon processing markets.

Intrinsically safe, Tetra is one of the only portable gas detectors with embedded software designed to the exacting requirements of IEC 61508-3, guaranteeing reliable and dependable operation.

Simple

• Single button operation
• Easy to read backlit display for gas readings and diagnostics
• Clear calibration due warning
• Rechargeable Li-ion battery gives 12 hours of continuous operation

Alarms

• Loud 94dBA audible alarm
• Ultra bright dual red/blue visual alarm
• Vibrating alarm

Robust

• Rugged plastic housing with flexible internal assembly to resist shock and vibration
• Durable over moulded rubber for added protection
• Water and dust resistant to IP65

Flexible

• Optional built-in pump
• Rechargeable and alkaline battery versions available
• Compatible with Crowcon Portables PC Software
• Fully interchangeable intelligent sensor modules

TET02 Tetra Personal MultiGas Monitor, Rechargeable without Pump by Crowcon

Tetra is a flexible multigas monitor for the detection of flammable gases, oxygen and a wide range of toxic gases. Available in rechargeable or disposable battery format and with or without an internal pump, it is used extensively in the utilities, chemicals and hydrocarbon processing markets.

Intrinsically safe, Tetra is one of the only portable gas detectors with embedded software designed to the exacting requirements of IEC 61508-3, guaranteeing reliable and dependable operation.

Simple

• Single button operation
• Easy to read backlit display for gas readings and diagnostics
• Clear calibration due warning
• Rechargeable Li-ion battery gives 12 hours of continuous operation

Alarms

• Loud 94dBA audible alarm
• Ultra bright dual red/blue visual alarm
• Vibrating alarm

Robust

• Rugged plastic housing with flexible internal assembly to resist shock and vibration
• Durable over moulded rubber for added protection
• Water and dust resistant to IP65

Flexible

• Optional built-in pump
• Rechargeable and alkaline battery versions available
• Compatible with Crowcon Portables PC Software
• Fully interchangeable intelligent sensor modules

Tetra Gas Test and Calibration Accessory Kit for Non-pumped Tetra (does not include gas cylinder)

Tetra manual English

Tetra Value Pack