Sound Level Meter

98767-13 Traceable® Sound Level Meter with Calibration by Digi-Sense

This digital sound level meter covers a wide sound level range at frequencies of 30 Hz to 12 KHz. Calibrate meter using 94 dB, 1000 Hz internal reference with push-button ease. Large 0.7-inch, 3.5-digit LCD is easy to read.

Choose from impulse (0.035 second), fast (0.2 second), or slow (1.5 second) response times for accurate peak and average sound levels. Use the tripod mount on the back for extended monitoring. Obtain the highest reading observed by using the Max Hold button. Use 3-pole 3.5-m stereo phone plug (not supplied) to access meter's AC and log-converted DC signal outputs.

Compliance: ANSI S1.4: type 2; IEC 61672-1 Class 2

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Obtain A or C weighted readings
• Two ranges cover a sound levels from 35 to 130 dB
• Max Hold feature updates display each time a new higher dB reading is measured

Includes

microphone windscreen, carrying case, battery, and NIST-traceable calibration certificate with data.

SCT-108.002.28 SCT LYN Sound Level Meter by ScichemTech

Includes:

• Battery
• Carrying Case

Features:

• A complete portable SCT meter for level of sound / noise measurements.
• Compact design with backlight display
• Auto range and auto power off.
• Min/max storage and recall
• Test range from 30 to 130 db (decibels) with 0.1 db (decibels) resolution.
• A & C frequency weighting.
• Fast & slow dynamic characteristic models
• Battery operated.

0563 8155 815 Sound Level Meter by Testo

The ideal instrument for daily use. Whether it is for air conditioning or heating, disco noise, machine noise or noise in combustion systems, testo 815 is the ideal partner.

• Easy to adjust (adjustment screwdriver included)
• Frequency weighting to Characteristic A and C
• Maximum and minimum value memory
• Built-in tripod knuckle screw (1/4 inch)
• Switchable time weighting Fast / Slow
• testo 815:
• Frequency weighting
• Current value
• Time weighting
• Section measurement range

0563 8165 816 Sound Level Meter by Testo

Compared to testo 815, the larger model has additional features which make it ideal for assessors, workplace measurements and for measuring industrial and environmental noise.

• Easy to adjust (adjustment screwdriver included)
• Frequency weighting to characteristic A and C
• Maximum and minimum memory
• Built-in tripod knuckle screw (1/4 inch)
• Switchable time weighting Fast / Slow
• Automatic range switchover
• Backlit display
• Mains unit connection
• BarGraph display
• AC output to connection from recorders and amplifiers
• DC output with 10 mV/dB to connect recorders or dataloggers
• testo 816:
• Time weighting
• Section measurement range
• Frequency weighting
• Current reading
• Automatic range switchover
• Backlit display
• Mains unit connection
• Barograph display
• AC output for connecting recorders and amplifiers
• DC output with 10 mV/dB for connecting recorders or data loggers

0563 8170 816-1 Sound Level Meter by Testo

The testo 816-1 is ideal for sound level measurements at workplaces, in commercial, and public areas. With the touch of a button, the 816-1 can be switched from Slow (1 sec.) to Fast (125 ms). It is also possible to switch between the frequency weighting characteristic curves A and C. Characteristic curve A corresponds to the sound pressure sensitivity of the human ear, while characteristic curve C can evaluate low-frequency components of a noise.

The integrated data store allows the storage of over 31,000 readings. Then download them for additional data analysis and management. The optional sound calibrator allows for easy on-site calibration.

• Meets ANSI S1.4 Type 2 and IEC 61672-1 class 2 performance standards
• Integrated data storage for up to 31,000 readings
• Data management and analysis with included software
• Fast/Slow switchable time weighting
• Backlit numerical and bar graph display
• AC and DC output compatibility
• Frequency weighting A and C

390 TDS/Salt Meter by Test Products International

Measure Total Dissolved Solids (TDS), salt and temperature for food, water quality and HVAC maintenance. Easy-to-read LCD display. Measures temperature, TDS concentration and salt levels in solutions.

The AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system. It is not necessary to disconnect the system in question because no contact is required for operation and current flow is not necessary to locate voltage. Simply touch the plastic tip to a connection point or move it along an insulated wire. If AC voltage is present, The AC Volt 50 will sound an audio alert and an LED light in the probe tip will glow bright red. The illumination will stop at a break in the circuit or wire, and this allows the AC sensor to be used as a troubleshooting instrument.

Applications

• Water: Test TDS levels to determine purity
• Food: Test the amount of salt in food, seafood, or processed foods
• Health: Monitor the amount of salt intake
• Water Filtration: Test for TDS to determine performance level of filtration systems
• Pools & Spas: Monitor TDS levels to prevent maintenance problems
• HVAC: Test condensate water in cooling tower and humidifier reservoir applications to prevent bacterial growth
• HVAC: Test TDS levels in make-up water to prevent scale formation, corrosion, and embrittlement
• HVAC: Reduce water and chemical consump tion in boilers and cooling towers
• HVAC: Determine when to perform blowdown and add make-up water
• HVAC: Prevent contamina tion and corrosion of control valves, heat exchangers, and steam traps
• HVAC: Verify automated TDS contollers are functioning properly
• HVAC: Prevent low quality wet steam generation in boilers due to foaming caused by high TDS levels

The Ranger Radiation Survey Meter by SE International

The Ranger offers maximum performance in a lightweight, rugged solution for surveying at the facility or in the field. The Ranger has been designed for industrial environments, but it still has all of the features you ve come to love in the lab. The Ranger is a small, handheld, microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays and has built in efficiencies for common isotopes to calculate activity in Bq and DPM. It has a backlit digital display, a red count light, and a beeper that sounds with each count detected. Other features include selectable alert levels, an adjustable timer, and an optional wipe test plate for swipes. Internal memory and the free Observer USB Software allow you to download your data, set computer alarms, and calibrate your instrument!

Ranger EXP Digital Radiation Meter with External Probe by SE International

The Ranger EXP offers maximum performance in a lightweight, rugged solution for using your survey meter in the field. The Ranger EXP is designed specifically for individuals operating in tough environments. The small, handheld unit offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. The digital readout is displayed with a red count light and a beeper sounds with each count detected. Other features include an adjustable timer, selectable alert, and with the free Observer USB Software Family, you can download your collected data, set alarms, and calibrate your meter!

72-0065RK GH-202F Portable Leak Tester for Methane (CH4) & LPG by RKI Instruments

Features

• Level meter and buzzer sound easy to watch
• Automatic balance circuit against background level
• Automatic suction
• Intrinsically safe in Japan
• Economical
• Field Proven Dependability

*Please note we can only ship RKI products to customers within the United States

37803-83 Traceable® Digital Thermohygrometer with Dew Point and Calibration by Digi-Sense

The meter warns you of environmental conditions that are out of a desired range with an audible alarm and bright red LED indicator. Features include a super-large, triple display for relative humidity, temperature, and dew point; min/max with reset function; and switchable °F/°C units.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Monitors relative humidity, temperature, and dew point
• Sound and light alarm activates when humidity level exceeds three presets

Includes

Built-in desktop stand, wall-mounting bracket and hardware, NIST-traceable calibration certificate with data, and two AA batteries.