Ph 30

AI6925-A Alkalinity Indicator, Total, 30mL by AquaPhoenix

• pH 4.6(pink) - 5.2(green)
• APHA for Alkalinity, 2320-B

Specifications

• Packaging Type: Poly
• pH Value: 4.6-5.2
• Size: 30 mL

MP3595-A Methyl Purple Indicator Solution, 30mL by AquaPhoenix

• pH 4.8 (purple) to 5.4 (green)

Specifications

• Packaging Type: Poly
• Size: 30 mL
• pH Value: 4.8-5.4

BB4865-P Bromophenol Blue Indicator Solution, 0.04% w/v, 500mL by AquaPhoenix

• pH 3.0 (yellow) - 4.6 (blue)

Specifications

• Packaging Type: Poly
• Concentration: 0.04% w/v
• Size: 500 mL
• pH Value: 3.0-4.6

PH1605-A Phenolphthalein Indicator, 30mL by AquaPhoenix

• 0.5% w/v in Isopropanol
• pH 8.3 colorless to pH 10.0 pink Flammable/UN1993

Specifications

• Packaging Type: Poly
• pH Value: 8.3-10
• Size: 30 mL

AI6925-A Bromocresol Green-Methyl Red Indicator Solution, 30mL by AquaPhoenix

• pH 4.6(pink) - 5.2(green)
• APHA for Alkalinity, 2320-B

Specifications

• Packaging Type: Poly
• Size: 30 mL
• pH Value: 4.6-5.2

6PIIFC Ultrameter II 6PII: Conductivity, pH, TDS, ORP, Free Chlorine (Myron L) by AquaPhoenix

Fast, accurate and rugged, the 6PII is a great way to streamline your testing. Whether in the lab or out in the field, you simply fill the cell up, push the parameter key and take your reading. Temperature compensation and range selection are both rapid and automatic. The 6PII is a multi-parameter meter allowing you to test for Conductivity, TDS, Resistivity, ORP, pH, Free Chlorine and Temperature.

pH: 0 to 14
Conductivity: 0-9999 μS/cm and 10-200 mS/cm
TDS: 0-9999 ppm / 10-200 ppt
Resistivity: 10K Omega - 30M Omega
ORP: +/- 999mV
Free Chlorine: 0.00-9.99ppm
Temperature: 0-71°C / 32-160°F

BB4865-C Bromophenol Blue Indicator Solution, 0.04% w/v, 120mL by AquaPhoenix

• pH 3.0 (yellow) - 4.6 (blue)

Specifications

• Packaging Type: Poly
• Concentration: 0.04% w/v
• Size: 120 mL
• pH Value: 3.0-4.6

BWTK200 Boiler Water Combination Test Kit by AquaPhoenix

The Boiler Water Test Kit 200 combines six common test parameters and two meters into one, easy-to-use combination test kit.. The kit is packaged in a durable plastic case with handle for easy transport. The kit includes all necessary reagents and EndPoint ID test instructions for monitoring Alkalinity, Chloride, Total Hardness, Calcium Hardness, Sulfite and Orthophosphate. We also added the Oakton pHTester 30 and Oakton ECTestr 11 in the foam lid. Test parameters and ranges can be modified based on your specific needs as can be the meters. Browse our product line and let us know how we can help customize this kit to fit your needs.

Specifications

• Alkalinity P & T: 1 drop = 10 ppm as CaCO3/25ml 1 drop = 50 ppm as CaCO3/25ml
• Chloride: 1 drop = 10 ppm as Cl/25ml
• Total & Calcium Hardness: 1 drop = 2 or 10 ppm as CaCO3/25ml
• Sulfite: 1 drop = 2 or 10 ppm as Na2SO3/25ml
• Orthophosphate: 30 or 60 ppm as PO4
• Oakton pHTestr 30: Range -1.0 to 15.0 pH Resolution 0.01 pH
• Oakton EC Testr 11 Dual Range: 0 to 20.00 mS 0 to 2000 μS

BB4880-P Bromophenol Blue Indicator Solution, 0.1% w/v, 500mL by AquaPhoenix

• pH 3.0 (yellow) - 4.6 (blue)

Specifications

• Packaging Type: Poly
• Concentration: 0.1% w/v
• Size: 500 mL
• pH Value: 3.0-4.6

BB4880-C Bromophenol Blue Indicator Solution, 0.1% w/v, 120mL by AquaPhoenix

• pH 3.0 (yellow) - 4.6 (blue)

Specifications

• Packaging Type: Poly
• Concentration: 0.1% w/v
• Size: 120 mL
• pH Value: 3.0-4.6

BB4865-Q Bromophenol Blue Indicator Solution, 0.04% w/v, 1L by AquaPhoenix

• pH 3.0 (yellow) - 4.6 (blue)

Specifications

• Packaging Type: Poly
• Concentration: 0.04% w/v
• Size: 1.00 L
• pH Value: 3.0-4.6

BB4880-Q Bromophenol Blue Indicator Solution, 0.1% w/v, 120mL by AquaPhoenix

• pH 3.0 (yellow) - 4.6 (blue)

Specifications

• Packaging Type: Poly
• Concentration: 0.1% w/v
• Size: 120 mL
• pH Value: 3.0-4.6

WCTK300 Water Conditioning Technician Kit by AquaPhoenix

The technicians kit is a complete field test kit designed for the water conditioning technician. This kit has reagents and equipment to test the incoming water and the effluent from the softener. Test include P & T Alkalinity, Hardness, Sulfide, Nitrate, Iron, Chlorine, pH and Conductivity / TDS. All of the items are housed in a durable and compact plastic case with a compartment to securely hold each item.

Kit Contains
Alkalinity, P&T Test, 1 drop = 10 ppm as CaCO3
Hardness Test, 1 drop = 1 gpg as CaCO3 and 1 drop =0.5 ppm as CaCO3
Iron Test, 0.5-10.0 ppm
pH, Wide Range Test, 5.0-10.0 pH
Chlorine, Free, Total and Combined Test, 0.2-3.0 ppm
Sulfide Test, 0.2-20.0 ppm
Nitrate Nitrogen Tablet Kit, 0-15 ppm
Conductivity Pen Meter

WD-35660-36 PH260 Waterproof pH and ORP Handheld Meter by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure pH, ORP and temperature

Includes

meter, and 2 AA batteries.

WD-35618-30 pH 450 Portable Waterproof pH Meter and Electrode by Oakton

The pH 450 meter offers an IP67-rated waterproof housing, making it ideal for the manufacturing floor, field testing, and the laboratory. The large, backlit LCD lets you view the main measurement simultaneously with temperature and calibration data with % slope. Calibrate pH and ISE with up to six points from USA, NIST, DIN, PWB and custom pH buffers. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature reading from degree C or degree F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery-life indicator, and electrode status.

Perform data logging with manual or timed collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cables for USB or RS-232 connectivity.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip electrode holder quickly and easily secures electrode to side of beaker or container
• USB or RS-232 output for up to 500 data sets
• Extended battery life or optional universal power adapter
• 700 hour battery-life, or optional AC power adapter
• Built-in stand with wall mount option allows for easy benchtop measurement or storage

WD-35614-30 pH 150 Portable Waterproof pH Meter and Electrode by Oakton

The pH 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you simply view the pH or mV measurement simultaneously with temperature and calibration % slope. Auto buffer recognition identifies the correct pH buffer for rapid, reliable calibration.

Calibrate meter with up to six points from USA, NIST, and DIN pH buffer sets. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and electrode status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip holder quickly and easily secures the electrode to your beaker
• Expanded data logging for up to 150 data sets
• mV offset for calibration of ORP standards, zeroing mV, and pH diagnostics
• 700 hour battery-life, or optional AC power adapter
• Built-in stand and wall mount option allow for easy benchtop measurement

WD-00655-30 Traceable® One-Shot™ Buffer Solution, Clear, pH 4.005; 6 x 100 mL Vials by Oakton

• Convenient, single-use vials eliminate concerns of cross-contamination; each pack contains six polyethylene vials with 100-mL of pH buffer per vial
• If unopened, shelf life is 2 years; once opened, use pH 4 and pH 7 within 90 days, pH 10 within 30 days

Oakton® Traceable® One-Shot™ pH Buffer Solutions are supplied with NIST-traceable calibration reports stating accuracy at 25°C to ±0.010 pH, in addition to conversion values for pH/temperature - for the most accurate calibrations!

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® pH buffer solutions are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• Individually packed in foil pouch to prevent UV exposure that may degrade accuracy
• Buffer solution lets you calibrate pH instruments to ensure accuracy
• If unopened, shelf life is 2 years
• Use to calibrate pH instruments to 4.005

INCLUDES

individual temperature compensation chart and NIST-Traceable calibration certificate with data

WD-35807-30 Teflon-junction, CPVC-body pH Electrode (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise

WD-35634-90 pHTestr 30 Portable Waterproof pH Tester with Calibration Kit by Oakton

pHTestr 30 calibration kit includes Testr, calibration buffer pouches (two each of pH 4.01, 7.00, 10.00 and rinse water), sample jar, and sturdy carrying case

WD-00651-30 Traceable® pH Standard Buffer with Calibration, Clear, pH 4, 1000 mL by Oakton

Oakton pH buffers are compared against, and are traceable to, NIST Standard Reference Materials. Each bottle includes a NIST-traceable calibration report stating accuracy at 25°C to ±0.010 pH. Color-coded and colorless buffers are available in 500-mL, 1-L, or 4-L packaging sizes. Additional values and packaging sizes are available. Store at room temperature.

Certified Reference Materials (CRM) meet federal, state, and or local agencies' strictest mandates, and deliver exact calibration results for any pH meter. A2LA ISO/IEC 17025:2005 (1750.01) (Calibration Laboratory) and ISO Guide 34 (Certified Reference Material Producer) provide highest achievable levels of product production, documentation, and accuracy. Additional accreditations include ISO 31 (content) and ISO 35 (statistical analysis). ISO 9001 ensures that world-class product standards for Materials are always met.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

NIST-traceable reference materials include a calibration report from an ISO 17034 and ISO 17025 accredited laboratory

• Choose from clear or color-coded standards from common calibration points
• 1000 mL (32 fl.oz.) capacity
• Calibrate at pH 4

PENPH pH Pen by Bluelab

Perfect for quick and easy pH and temperature readings direct from your solution.

The Bluelab® pH Pen is the preferred option for hand held pH meters. It provides a compact, quick and handy way to manage the success of your crops to ensure maximum uptake of nutrients.

A key parameter that affects nutrient uptake is whether your solution is acid or alkaline. We measure this in pH.

Teamed with our Bluelab® Conductivity Pen you have a robust, convenient and accurate measurement system.

Features:

• Measures pH and temperature
• Selectable units for temperature
• Fully waterproof
• Backlit LCD display
• Double junction probe (not replaceable)
• Simple two point calibration process with 30 day calibration indicator
• Hold reading function
• Low battery indicator
• Auto off function
• Automatic temperature compensation
• 1 AAA replaceable battery included

WD-35419-30 pH 550 Benchtop pH Meter Kit by Oakton

The PH 550 benchtop pH meter features a microprocessor chip which provides automatic temperature compensation, data storage, parameter setup, and Max/Min reading display. The meter offers a pH range from 0 to 14 and a three-point automatic calibration, with the ability to recognize standard buffer solutions (USA or NIST series). The advanced digital processing technology improves meter response time and measuring accuracy. A stable reading display icon appears when the measuring value is stable.

The 3-in-1 combination pH electrode measures pH and temperature simultaneously. The compact meter includes a detachable electrode holder and three bottles of pH buffer solution. It has a dustproof and spillproof rating of IP54. Connectors are protected by silicone seal caps.

Economical meter for benchtop pH measurement

• Automatically recognizes calibration solutions
• Compact design saves valuable benchtop space
• Data logging allows you to store and recall up to 50 groups of data
• IP54-rated housing is dust- and spill-proof

INCLUDES

Plastic 3-in-1 combination pH electrode, electrode holder, pH standard buffer solutions (4.00/7.00/10.01 pH, 50 mL each), and 9 VAC power adapter.

6010MKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.