Pelsue Tent

6506SRS Shade Tent. 6' x 6' Reflective Stripe by Pelsue

With increasing heat stress-related injuries and deaths on the work site, the need for shade during breaks has become imperative. The Pelsue Shade Tent provides portable instant shade. Using time proven Pelsue tent technology, the shade tent offers on site shade for work crews. The tent is easy to set up and has a rugged construction. Multiple sizes are available

• Provides portable shade - sets up in seconds
• Industrial strength - made for daily commercial use
• Pops up in seconds - no loose parts or finger pinching frames
• Opaque roof fabric - also used in airplane windshield covers!
• Three mesh sides provide ventilation
• Removable fly for blocking late afternoon sun
• Carry case included
• Custom colors & branding available
• Can be set up in 24 seconds

MEETS CALIFORNIA OSHA STANDARDS

Title 8 Section 3395 subsection D1 (d) Access to shade. (1) Shade required to be present when the temperature exceeds 85 degrees Fahrenheit. When the outdoor temperature in the work area exceeds 85 degrees Fahrenheit, the employer shall have and maintain one or more areas with shade at all times while employees are present that are either open to the air or provided with ventilation or cooling. The amount of shade present shall be at least enough to accommodate 25% of the employees on the shift at any time, so that they can sit in a normal posture fully in the shade without having to be in physical contact with each other. The shaded area shall be located as close as practicable to the areas where employees are working.

6506FSGH Fiber Optic Splicing Tent, 6 x 6', White/Black Rear, Rear Wall Zipper Cable Slot, with Case by Pelsue

This portable tent features improvements specifically for fiber splicing. Including a large rear access slot for large truck cables. With a spacious interior there is more than enough room for your equipment and a collapsible table. The tent has two side vents, with fabric mesh screening which allows for additional ventilation and light to get in while keeping insects out. The front side of the tent also functions as a roll-up door, and includes double sided zippers to allow for easy entry and exit. Both the roll-up door and the two side vents can be secured with built in Velcro straps. The back features two locking zippers to facilitate cable and fiber access into the tent, while minimizing the unwanted light. As always the tent material is Fire/UV/Water resistant to ensure a comfortable working environment regardless of the weather, and comes with a case.

Features of the Fiber to the Home Shelter

• Large 14" cable access door, includes double-sided zipper, also suitable as a ventilation/hose pass-through.
• Solar blocking (black) Material on all interior surfaces-Heavy duty frame for increased wind resistance
• Webbing loops on all four corners, allows corners to be secured with ground stakes if necessary
• Tie down cords on both exterior sides and rear, for use with ground stakes if necessary
• Roll-up front door, with two double sided heavy-duty zippers, and tie-offs at the top of the tent to secure door when not in use
• Two oversized black mesh windows, one on each of the sides (not front or rear), for additional light and/or circulation

6334AN 5x5 Multi Tent by Pelsue

The 5-in-1 specialty tent is a single tent which, when used with the appropriate hardware, can perform multiple functions. The tent may be attached to a manhole guard, pole, ladder, strand, or bucket truck. Door style features snap & D-ring closures. Includes strand mounting hardware (P/N 63350). All other hardware ordered separately

6508SRS Shade Tent. 8' x 8' Reflective Stripe by Pelsue

With increasing heat stress-related injuries and deaths on the work site, the need for shade during breaks has become imperative. The Pelsue Shade Tent provides portable instant shade. Using time proven Pelsue tent technology, the shade tent offers on site shade for work crews. The tent is easy to set up and has a rugged construction. Multiple sizes are available

• Provides portable shade - sets up in seconds
• Industrial strength - made for daily commercial use
• Pops up in seconds - no loose parts or finger pinching frames
• Opaque roof fabric - also used in airplane windshield covers!
• Three mesh sides provide ventilation
• Removable fly for blocking late afternoon sun
• Carry case included
• Custom colors & branding available
• Can be set up in 24 seconds

MEETS CALIFORNIA OSHA STANDARDS

Title 8 Section 3395 subsection D1 (d) Access to shade. (1) Shade required to be present when the temperature exceeds 85 degrees Fahrenheit. When the outdoor temperature in the work area exceeds 85 degrees Fahrenheit, the employer shall have and maintain one or more areas with shade at all times while employees are present that are either open to the air or provided with ventilation or cooling. The amount of shade present shall be at least enough to accommodate 25% of the employees on the shift at any time, so that they can sit in a normal posture fully in the shade without having to be in physical contact with each other. The shaded area shall be located as close as practicable to the areas where employees are working.

6510SRS Shade Tent. 10' x 10' Reflective Stripe by Pelsue

With increasing heat stress-related injuries and deaths on the work site, the need for shade during breaks has become imperative. The Pelsue Shade Tent provides portable instant shade. Using time proven Pelsue tent technology, the shade tent offers on site shade for work crews. The tent is easy to set up and has a rugged construction. Multiple sizes are available

• Provides portable shade - sets up in seconds
• Industrial strength - made for daily commercial use
• Pops up in seconds - no loose parts or finger pinching frames
• Opaque roof fabric - also used in airplane windshield covers!
• Three mesh sides provide ventilation
• Removable fly for blocking late afternoon sun
• Carry case included
• Custom colors & branding available
• Can be set up in 24 seconds

MEETS CALIFORNIA OSHA STANDARDS

Title 8 Section 3395 subsection D1 (d) Access to shade. (1) Shade required to be present when the temperature exceeds 85 degrees Fahrenheit. When the outdoor temperature in the work area exceeds 85 degrees Fahrenheit, the employer shall have and maintain one or more areas with shade at all times while employees are present that are either open to the air or provided with ventilation or cooling. The amount of shade present shall be at least enough to accommodate 25% of the employees on the shift at any time, so that they can sit in a normal posture fully in the shade without having to be in physical contact with each other. The shaded area shall be located as close as practicable to the areas where employees are working.

6510DRAD Ground Tent 6510D, roll Up Rear Access Door by Pelsue

DRAD tents incorporate the standard features found in the Pelsue "D" series ground tents, along with a 30" wide roll-up rear door for personnel entry and exit. It is ideal for working up against any type of cabinet. The tent also doubles as a standalone ground tent for construction or splicing.

Also can be used in conjunction with same size D series tent.

6508DRAD Ground Tent 6508D with Roll Up Rear Access Door by Pelsue

DRAD tents incorporate the standard features found in the Pelsue "D" series ground tents, along with a 30" wide roll-up rear door for personnel entry and exit. It is ideal for working up against any type of cabinet. The tent also doubles as a standalone ground tent for construction or splicing.

Also can be used in conjunction with same size D series tent.

6510C Ground Tent 10' x 10' x 9' High, Yellow/White by Pelsue

D-Series tents are highly durable and portable general purpose work tents. Most importantly they feature inter-connectable flaps that allow two tents to be attached together, once attached entrance can be gained through the flaps. D-Series tents may be combined with DRAD tents which feature a rear access door if desired. This makes D-Series tents perfect for situation where you want separate but connected work-spaces. As with all Pelsue tents the primary fabric is water, mildew, UV, and flame retardant (to CPAI-84).

Includes:

• One-piece, instant set up
• No loose parts
• Two screened windows (most models)
• Tie-down cords through hubs
• Ground flaps for weight anchoring
• Rubber, non-slip feet
• Exterior, roof level D-rings
• Carry case & three tent stakes
• Heavy duty frame
• Wide open front
• Snap and D-rings with interconnecting flaps (connects 2 tents together)
• Ventilation hose entry sleeve
• Interior and exterior roof line loops for tie down
• Tent Stabilizing Feet (6510C only)

6506DCS Ground Tent 6506D with Cable Slot in Rear Wall by Pelsue

DCS Model ground tents feature a vertical slit in the rear wall, from the hub to the ground. Slit is closed over by means of a "Velcro" style closure and a hook & ring assembly. Used to allow entry of cable or pipe when doing fusion or splicing in the tent. Includes vent sleeve.

6508DCS Ground Tent 6508D with Cable Slot in Rear Wall by Pelsue

DCS Model ground tents feature a vertical slit in the rear wall, from the hub to the ground. Slit is closed over by means of a "Velcro" style closure and a hook & ring assembly. Used to allow entry of cable or pipe when doing fusion or splicing in the tent. Includes vent sleeve.

6413A Trench Tent with Carry Case, 13' x 24' x 8.5' High by Pelsue

Available in three standard sizes, these tents offer protection from the elements during trenching or boring operations. One-piece construction allows for easy setup and dismantling, with no interior obstructions. Openings on both ends for easy access. This tent may be used as a modular setup by adding as many units (end-to-end) as required.

6416A Trench Tent with Carry Case, 16' x 30' x 10.5' High by Pelsue

Available in three standard sizes, these tents offer protection from the elements during trenching or boring operations. One-piece construction allows for easy setup and dismantling, with no interior obstructions. Openings on both ends for easy access. This tent may be used as a modular setup by adding as many units (end-to-end) as required.

6408A Trench Tent with Carry Case, 8' x 16' x 6.5' High by Pelsue

Available in three standard sizes, these tents offer protection from the elements during trenching or boring operations. One-piece construction allows for easy setup and dismantling, with no interior obstructions. Openings on both ends for easy access. This tent may be used as a modular setup by adding as many units (end-to-end) as required.

Features

• Quick fold design
• Erects in less than 60 seconds
• Heavy duty fabrics
• Waterproof coating
• Sealed seams
• Fiberglass rods
• Reinforced rod-end pockets
• Metal hubs
• One piece construction
• Opening at both ends
• Modular set availability

6705 Ground Tent, Yellow and Gray, Fiber to the Home, 6.5ft Tall by Pelsue

The Pelsue quick fold design allows this tent to be erected and ready for work in seconds. Heavy duty fabrics, waterproof coating, sealed seams, fiberglass rods, reinforced rod-end pockets and metal hubs provide years of service in the field. The tent's snug fit on the work surface side, and low-profile access door keep wind, dust, rain and snow out.

Features of the Fiber to the Home Shelter

• Quick fold design, setup in less than 60 seconds
• Heavy Duty Water/Fire/UV resistant fabrics
• Rust proof Fiberglass rods
• Water tight seams
• Access door with ties to hold open

6506D Ground Tent, Yellow and White, 6' x 6' x 6'H, with Case by Pelsue

D-Series tents are highly durable and portable general purpose work tents. Most importantly they feature inter-connectable flaps that allow two tents to be attached together, once attached entrance can be gained through the flaps. D-Series tents may be combined with DRAD tents which feature a rear access door if desired. This makes D-Series tents perfect for situation where you want separate but connected work-spaces. As with all Pelsue tents the primary fabric is water, mildew, UV, and flame retardant (to CPAI-84).

Includes:

• One-piece, instant set up
• No loose parts
• Two screened windows (most models)
• Tie-down cords through hubs
• Ground flaps for weight anchoring
• Rubber, non-slip feet
• Exterior, roof level D-rings
• Carry case & three tent stakes
• Heavy duty frame
• Wide open front
• Snap and D-rings with interconnecting flaps (connects 2 tents together)
• Ventilation hose entry sleeve
• Interior and exterior roof line loops for tie down
• Tent Stabilizing Feet (6510C only)

6508D Ground Tent, Yellow and White, 8' x 8' x 6.5'H, with Case by Pelsue

D-Series tents are highly durable and portable general purpose work tents. Most importantly they feature inter-connectable flaps that allow two tents to be attached together, once attached entrance can be gained through the flaps. D-Series tents may be combined with DRAD tents which feature a rear access door if desired. This makes D-Series tents perfect for situation where you want separate but connected work-spaces. As with all Pelsue tents the primary fabric is water, mildew, UV, and flame retardant (to CPAI-84).

Includes:

• One-piece, instant set up
• No loose parts
• Two screened windows (most models)
• Tie-down cords through hubs
• Ground flaps for weight anchoring
• Rubber, non-slip feet
• Exterior, roof level D-rings
• Carry case & three tent stakes
• Heavy duty frame
• Wide open front
• Snap and D-rings with interconnecting flaps (connects 2 tents together)
• Ventilation hose entry sleeve
• Interior and exterior roof line loops for tie down
• Tent Stabilizing Feet (6510C only)

6510D Ground Tent, Yellow and White, 10' x 10' x 6.5'H, with Case by Pelsue

D-Series tents are highly durable and portable general purpose work tents. Most importantly they feature inter-connectable flaps that allow two tents to be attached together, once attached entrance can be gained through the flaps. D-Series tents may be combined with DRAD tents which feature a rear access door if desired. This makes D-Series tents perfect for situation where you want separate but connected work-spaces. As with all Pelsue tents the primary fabric is water, mildew, UV, and flame retardant (to CPAI-84).

Includes:

• One-piece, instant set up
• No loose parts
• Two screened windows (most models)
• Tie-down cords through hubs
• Ground flaps for weight anchoring
• Rubber, non-slip feet
• Exterior, roof level D-rings
• Carry case & three tent stakes
• Heavy duty frame
• Wide open front
• Snap and D-rings with interconnecting flaps (connects 2 tents together)
• Ventilation hose entry sleeve
• Interior and exterior roof line loops for tie down
• Tent Stabilizing Feet (6510C only)

6512D Ground Tent, Yellow and White, 12' x 12' x 6.5'H, with Case by Pelsue

D-Series tents are highly durable and portable general purpose work tents. Most importantly they feature inter-connectable flaps that allow two tents to be attached together, once attached entrance can be gained through the flaps. D-Series tents may be combined with DRAD tents which feature a rear access door if desired. This makes D-Series tents perfect for situation where you want separate but connected work-spaces. As with all Pelsue tents the primary fabric is water, mildew, UV, and flame retardant (to CPAI-84).

Includes:

• One-piece, instant set up
• No loose parts
• Two screened windows (most models)
• Tie-down cords through hubs
• Ground flaps for weight anchoring
• Rubber, non-slip feet
• Exterior, roof level D-rings
• Carry case & three tent stakes
• Heavy duty frame
• Wide open front
• Snap and D-rings with interconnecting flaps (connects 2 tents together)
• Ventilation hose entry sleeve
• Interior and exterior roof line loops for tie down
• Tent Stabilizing Feet (6510C only)

6742 Floating Tent, 42" X 42" with 60" Drop Down Walls by Pelsue

The Pelsue Floating Tent is designed as a portable shelter for situations where traditional tents aren't practical. This new tent design requires only a smooth clean surface for setup, making it perfect for tight spaces such as those found around Charles cabinets (like those commonly housing telecommunications equipment). If you are looking for shade or protection from inclement weather the Floating Tent has you covered. Thanks to the design of the suction cups it's also possible to attach the umbrella to surfaces that aren't perfectly flat, such as the side of work vehicles and trucks. With roll up sides it functions as both an umbrella and a four sided tent depending on your needs. Like all Pelsue Tent products, the tent material is Fire/UV/Water resistant and made in America. The suction cups used here are pump operated for a strong hold, our current record is 6 hours on a smooth clean surface.

Floating Tent Features

• Adjustable support with three joints to insure versatility in any location. Includes two hinge joints (base can be rotated in two axes), and a ball joint at the top.
• Four Roll down sides, can be set at 60", 30", or completely rolled up.
• Zippers at each corner for entry and exit.
• Velcro Clasps to hold each side up when not in use.
• Water/Fire/UV resistant fabric for all portions of the tent.
• Rope for tying off all four corners with pockets for storage.
• Non-Rusting and Rust resistant components for support structure.
• Dual Pump operated suction cups, with hold indicator on pump.
• Mesh carrying case.

6504A Ground Tent, Yellow and White, 4' x 4' x 6'H, with Case by Pelsue

A-Series tents make excellent general work tents. Light weight and portable, these tents are made from high quality materials. The primary fabric in these tents is a urethane coated, waterproof, mildew resistant, UV protected, flame retardant (to CPAI-84) polyester. With cast aluminum hubs and pultruded Fiberglass Rods A-Series tents are tough and will work wherever the job takes you. "A" Model Tents includes two screen windows with roll up flaps, three tie down cords through the hub, ground flaps, heavy duty frame, wide open front, dual zipper roll up door, interior and exterior roof line loops for tie down, carrying case, & three tent stakes.

6506A Ground Tent, Yellow and White, 6' x 6' x 6'H, with Case by Pelsue

A-Series tents make excellent general work tents. Light weight and portable, these tents are made from high quality materials. The primary fabric in these tents is a urethane coated, waterproof, mildew resistant, UV protected, flame retardant (to CPAI-84) polyester. With cast aluminum hubs and pultruded Fiberglass Rods A-Series tents are tough and will work wherever the job takes you. "A" Model Tents includes two screen windows with roll up flaps, three tie down cords through the hub, ground flaps, heavy duty frame, wide open front, dual zipper roll up door, interior and exterior roof line loops for tie down, carrying case, & three tent stakes.