Pelsue 8 X 8 Tent

6508SRS Shade Tent. 8' x 8' Reflective Stripe by Pelsue

With increasing heat stress-related injuries and deaths on the work site, the need for shade during breaks has become imperative. The Pelsue Shade Tent provides portable instant shade. Using time proven Pelsue tent technology, the shade tent offers on site shade for work crews. The tent is easy to set up and has a rugged construction. Multiple sizes are available

• Provides portable shade - sets up in seconds
• Industrial strength - made for daily commercial use
• Pops up in seconds - no loose parts or finger pinching frames
• Opaque roof fabric - also used in airplane windshield covers!
• Three mesh sides provide ventilation
• Removable fly for blocking late afternoon sun
• Carry case included
• Custom colors & branding available
• Can be set up in 24 seconds

MEETS CALIFORNIA OSHA STANDARDS

Title 8 Section 3395 subsection D1 (d) Access to shade. (1) Shade required to be present when the temperature exceeds 85 degrees Fahrenheit. When the outdoor temperature in the work area exceeds 85 degrees Fahrenheit, the employer shall have and maintain one or more areas with shade at all times while employees are present that are either open to the air or provided with ventilation or cooling. The amount of shade present shall be at least enough to accommodate 25% of the employees on the shift at any time, so that they can sit in a normal posture fully in the shade without having to be in physical contact with each other. The shaded area shall be located as close as practicable to the areas where employees are working.

6508LG Fiber Optic Splicing Tent, 8' x 8', with Case by Pelsue

This Pelsue Innovation features a heavier poly-cotton breathable fabric and solar fly sunshade. The walls are solid white and constructed of acrylic for "breathability" and increased light. Cable slots with "velcro" style closures allow easy access to cable while doors are shut. May be used with Pelsue heaters (Model 1590, 1690D). Options include a fiber optic splicing table, part number 107022-001 and "Velcro-in" floors.

6508LGF Fiber Optic Splicing Tent, 8' x 8', with Standard Floor and Case by Pelsue

This Pelsue Innovation features a heavier poly-cotton breathable fabric and solar fly sunshade. The walls are solid white and constructed of acrylic for "breathability" and increased light. Cable slots with "velcro" style closures allow easy access to cable while doors are shut. May be used with Pelsue heaters (Model 1590, 1690D). Options include a fiber optic splicing table, part number 107022-001 and "Velcro-in" floors.

6508LGH Fiber Optic Splicing Tent, 8' x 8', with Heavy Duty Floor and Case by Pelsue

This Pelsue Innovation features a heavier poly-cotton breathable fabric and solar fly sunshade. The walls are solid white and constructed of acrylic for "breathability" and increased light. Cable slots with "velcro" style closures allow easy access to cable while doors are shut. May be used with Pelsue heaters (Model 1590, 1690D). Options include a fiber optic splicing table, part number 107022-001 and "Velcro-in" floors.

6508FS Fiber Optic Splicing Tent, 8' x 8', White/Black Rear, Rear Wall Zipper Cable Slot, with Case by Pelsue

This portable tent features improvements specifically for fiber splicing. Including a large rear access slot for large truck cables. With a spacious interior there is more than enough room for your equipment and a collapsible table. The tent has two side vents, with fabric mesh screening which allows for additional ventilation and light to get in while keeping insects out. The front side of the tent also functions as a roll-up door, and includes double sided zippers to allow for easy entry and exit. Both the roll-up door and the two side vents can be secured with built in Velcro straps. The back features two locking zippers to facilitate cable and fiber access into the tent, while minimizing the unwanted light. As always the tent material is Fire/UV/Water resistant to ensure a comfortable working environment regardless of the weather, and comes with a case.

Features of the Fiber to the Home Shelter

• Large 14" cable access door, includes double-sided zipper, also suitable as a ventilation/hose pass-through.
• Solar blocking (black) Material on all interior surfaces-Heavy duty frame for increased wind resistance
• Webbing loops on all four corners, allows corners to be secured with ground stakes if necessary
• Tie down cords on both exterior sides and rear, for use with ground stakes if necessary
• Roll-up front door, with two double sided heavy-duty zippers, and tie-offs at the top of the tent to secure door when not in use
• Two oversized black mesh windows, one on each of the sides (not front or rear), for additional light and/or circulation

6508A Ground Tent, Yellow and White, 8' x 8' x 6.5'H, with Case by Pelsue

A-Series tents make excellent general work tents. Light weight and portable, these tents are made from high quality materials. The primary fabric in these tents is a urethane coated, waterproof, mildew resistant, UV protected, flame retardant (to CPAI-84) polyester. With cast aluminum hubs and pultruded Fiberglass Rods A-Series tents are tough and will work wherever the job takes you. "A" Model Tents includes two screen windows with roll up flaps, three tie down cords through the hub, ground flaps, heavy duty frame, wide open front, dual zipper roll up door, interior and exterior roof line loops for tie down, carrying case, & three tent stakes.

6508D Ground Tent, Yellow and White, 8' x 8' x 6.5'H, with Case by Pelsue

D-Series tents are highly durable and portable general purpose work tents. Most importantly they feature inter-connectable flaps that allow two tents to be attached together, once attached entrance can be gained through the flaps. D-Series tents may be combined with DRAD tents which feature a rear access door if desired. This makes D-Series tents perfect for situation where you want separate but connected work-spaces. As with all Pelsue tents the primary fabric is water, mildew, UV, and flame retardant (to CPAI-84).

Includes:

• One-piece, instant set up
• No loose parts
• Two screened windows (most models)
• Tie-down cords through hubs
• Ground flaps for weight anchoring
• Rubber, non-slip feet
• Exterior, roof level D-rings
• Carry case & three tent stakes
• Heavy duty frame
• Wide open front
• Snap and D-rings with interconnecting flaps (connects 2 tents together)
• Ventilation hose entry sleeve
• Interior and exterior roof line loops for tie down
• Tent Stabilizing Feet (6510C only)

6508DSB Interlocking Series Work Tent - yellow and white, 8' x 8' x 6.5' H, with case by Pelsue

The interlocking flaps allow you to connect two tents together, or attach the tent to a work vehicle. The interlocking flaps are a great way to get extra functionality out of your tent.

• Easy Set Up
• Interlocking Doors
• Clips & D-rings with interlocking flaps
• Rear 8" ventilation hose entry sleeve
• Heavy-duty frame
• 2 screen windows with roll-up flaps
• 3 tie-down cords through the hubs
• 7 stakes and 4 ground loops
• Carrying case

6408ASB Trench Tent - 8' W x 16' L x 6.6' H, with case by Pelsue

The Pelsue Trench Series Tents offer protection from the elements during trenching or boring operations. One-piece construction allows for easy set-up and break-down.

There are openings on both ends for easy access.

The tents may be used as a modular set up by adding as many units (end to end) as required.

Features:

• One piece construction
• Fits over obstacles
• Industrial strength

Includes:

• Heavy-duty frame
• Windows with roll-up flaps
• Openings on both ends of tent for easy entry
• Tie-down cords on hubs for extra stability
• Carrying case and stakes

6408A Trench Tent with Carry Case, 8' x 16' x 6.5' High by Pelsue

Available in three standard sizes, these tents offer protection from the elements during trenching or boring operations. One-piece construction allows for easy setup and dismantling, with no interior obstructions. Openings on both ends for easy access. This tent may be used as a modular setup by adding as many units (end-to-end) as required.

Features

• Quick fold design
• Erects in less than 60 seconds
• Heavy duty fabrics
• Waterproof coating
• Sealed seams
• Fiberglass rods
• Reinforced rod-end pockets
• Metal hubs
• One piece construction
• Opening at both ends
• Modular set availability

6506DSB Interlocking Series Work Tent - yellow and white, 6' x 6' x 6' H, with case by Pelsue

The interlocking flaps allow you to connect two tents together, or attach the tent to a work vehicle. The interlocking flaps are a great way to get extra functionality out of your tent.

• Easy Set Up
• Interlocking Doors
• Clips & D-rings with interlocking flaps
• Rear 8" ventilation hose entry sleeve
• Heavy-duty frame
• 2 screen windows with roll-up flaps
• 3 tie-down cords through the hubs
• 7 stakes and 4 ground loops
• Carrying case

6510DSB Interlocking Series Work Tent - yellow and white, 10' x 10' x 6.5' H, with case by Pelsue

The interlocking flaps allow you to connect two tents together, or attach the tent to a work vehicle. The interlocking flaps are a great way to get extra functionality out of your tent.

• Easy Set Up
• Interlocking Doors
• Clips & D-rings with interlocking flaps
• Rear 8" ventilation hose entry sleeve
• Heavy-duty frame
• 2 screen windows with roll-up flaps
• 3 tie-down cords through the hubs
• 7 stakes and 4 ground loops
• Carrying case

6506SRS Shade Tent. 6' x 6' Reflective Stripe by Pelsue

With increasing heat stress-related injuries and deaths on the work site, the need for shade during breaks has become imperative. The Pelsue Shade Tent provides portable instant shade. Using time proven Pelsue tent technology, the shade tent offers on site shade for work crews. The tent is easy to set up and has a rugged construction. Multiple sizes are available

• Provides portable shade - sets up in seconds
• Industrial strength - made for daily commercial use
• Pops up in seconds - no loose parts or finger pinching frames
• Opaque roof fabric - also used in airplane windshield covers!
• Three mesh sides provide ventilation
• Removable fly for blocking late afternoon sun
• Carry case included
• Custom colors & branding available
• Can be set up in 24 seconds

MEETS CALIFORNIA OSHA STANDARDS

Title 8 Section 3395 subsection D1 (d) Access to shade. (1) Shade required to be present when the temperature exceeds 85 degrees Fahrenheit. When the outdoor temperature in the work area exceeds 85 degrees Fahrenheit, the employer shall have and maintain one or more areas with shade at all times while employees are present that are either open to the air or provided with ventilation or cooling. The amount of shade present shall be at least enough to accommodate 25% of the employees on the shift at any time, so that they can sit in a normal posture fully in the shade without having to be in physical contact with each other. The shaded area shall be located as close as practicable to the areas where employees are working.

6510SRS Shade Tent. 10' x 10' Reflective Stripe by Pelsue

With increasing heat stress-related injuries and deaths on the work site, the need for shade during breaks has become imperative. The Pelsue Shade Tent provides portable instant shade. Using time proven Pelsue tent technology, the shade tent offers on site shade for work crews. The tent is easy to set up and has a rugged construction. Multiple sizes are available

• Provides portable shade - sets up in seconds
• Industrial strength - made for daily commercial use
• Pops up in seconds - no loose parts or finger pinching frames
• Opaque roof fabric - also used in airplane windshield covers!
• Three mesh sides provide ventilation
• Removable fly for blocking late afternoon sun
• Carry case included
• Custom colors & branding available
• Can be set up in 24 seconds

MEETS CALIFORNIA OSHA STANDARDS

Title 8 Section 3395 subsection D1 (d) Access to shade. (1) Shade required to be present when the temperature exceeds 85 degrees Fahrenheit. When the outdoor temperature in the work area exceeds 85 degrees Fahrenheit, the employer shall have and maintain one or more areas with shade at all times while employees are present that are either open to the air or provided with ventilation or cooling. The amount of shade present shall be at least enough to accommodate 25% of the employees on the shift at any time, so that they can sit in a normal posture fully in the shade without having to be in physical contact with each other. The shaded area shall be located as close as practicable to the areas where employees are working.

6334ASB Multi-Tent - strand hardware, 3.6' W x 3.6' L x 8' H by Pelsue

The Pelsue Multi-Tent can attach to a strand, bucket, ladder, pole, or manhole guard with the appropriate hardware.

This tent is available with plastic hub (6334AP) instead of metal hub (6334A) and is also available in a larger size (6334AN).

Features:

• 5-in-1 Tent
• Solar blocking top
• Easy set-up

Includes:

• Strand Hardware (63350)
• Clips & D-rings to close off tent
• Solar blocking top
• Heavy-duty frame
• Roll-up sides
• Carrying case

Not included:

• Bucket Hardware (63360)
• Ladder/Pole Hardware (63380)
• Guard Hardware (63390)

6508DRADSB Dual-Entry Series - roll-up rear access door, 8' W x 8' L x 6.5' H by Pelsue

The Pelsue Dual-Entry Series improves upon the Interlocking Series by adding a rear-access door for easy entry and exit when the front of the tent is closed off. This allows for greater access to work on a cabinet/box when two tents are connected together, or when the tent is attached to a work vehicle.

• Rear-access Door
• Easy Set Up
• Interlocking Doors
• Clips and D-rings with interlocking flaps
• 30" wide dual zipper roll-up rear-access door
• Heavy-duty frame
• Roll-up front flaps
• 8" side ventilation hose entry sleeve
• 2 screen windows with roll-up flaps
• 3 tie-down cords through the hubs
• 7 stakes and 4 ground loops
• Carrying case

6508SBRS SolarShade Work Shelter - 8' W x 8' L x 6.5' H, with case by Pelsue

The Pelsue SolarShade® Work Shelter can be rapidly deployed, and creates instant shade. Three sides of the tent have full-size, roll-up mesh windows for maximum ventilation. The SolarShade® Series tents use a special solar blocking material, which prevents solar gain, so the tent stays cooler compared to the typical fabrics used in most other tents.

The SolarShade® Series tents are specially designed with a solar blocking material throughout the interior. The material helps blocks solar gain as well as unwanted light. This allows the tent to be deployed in hot weather environments, where the tent acts like a shade tree.

• Portable instant shade
• Blocks solar gain
• Sides roll up
• Solar blocking material on all surfaces
• Roll-up front door with double-sided zippers
• 3 mesh sides to allow for ventilation
• Removable fly for blocking late afternoon sun
• Roll-up front door and windows
• Tie-down cords for extra support
• 7 stakes and 4 ground loops
• Carrying case

65068A "HIGH-5" Ground Tent, 6' x 6' x 8' High, 1/2 Moon Zip Door Rear by Pelsue

Tent measures 6' x 6' x 8' high. Ideal for use over industrial tripod or davit retrieval hoists. May be used to cover pad or pole mounted cabinets or anywhere that additional height is required. Rear Access 1/2 moon style zipper door included. Door style velcro slit and 8" diameter heater/ventilator hose sleeve.