Orp Meter

62K ORP Handheld Meter with Offset Adjustment Kit by Jenco

ORP handheld meter with BNC and Zero Adjustment via manual potentiometers for calibration of meter and ORP electrode to calibration standard solutions. Housed in a rugged splash proof case with large LCD display. AC/DC Powered.

Includes:

• 62 ORP Handheld Meter with Offset Adjustment
• 600E-ORP Probe
• 600D115 AC Adapter
• 6007F Carrying case

• Zero adjust for ORP
• LCD display
• Long 1400 hrs battery life
• High stability
• Rugged case

SCT-108.001.07 SCT-ORP-PEN-1 Handheld ORP Meter by ScichemTech

Includes:

• Handheld ORP Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy ORP measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 1 mV resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With better TDS resolution 1ppm
• Battery operated.

6010MKA Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000P 3-in-1 pH/ ATC Probe, 4-pin connector, Temp. 60º C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

MW500 Standard Portable ORP Meter by Milwaukee

Standard portable meters with no frills! Milwaukee's low cost durable meters for quick and reliable measurements.

Milwaukee's Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.

MW500 performs ORP measurements with a range of ±1000 mV. The meter is supplied with ORP electrode and calibration solutions.

62 ORP Handheld Meter with Offset Adjustment by Jenco

ORP handheld meter with BNC and Zero Adjustment via manual potentiometers for calibration of meter and ORP electrode to calibration standard solutions. Housed in a rugged splash proof case with large LCD display. AC/DC Powered.

• Zero adjust for ORP
• LCD display
• Long 1400 hrs battery life
• High stability
• Rugged case

WD-35660-70 PH350 Waterproof Single-Channel pH and ORP Smart Handheld Meter Kit by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 300 series multiparameter meters utilize smart sensor technology with sensor heads that feature a built-in digital circuit for automatic sensor recognition. Sensor information including sensor ID, calibration data, and measurement setup is stored in sensor head and viewable on the meter display when sensor is connected.

Sensor heads are easy to connect and disconnect with waterproof push-lock connector. Sensor cartridges (pH and EC) are replaceable for a cost-efficient and environmentally friendly system. Blue LED light on the sensor head functions as a reading stability indicator, flashing until the reading is stable.

Meter stores up to 10,000 data sets with date-and-time stamp for accurate and easy analysis. Quickly transfer data from meter to computer seamlessly via USB cable or wirelessly via Wi-Fi.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Three grooves on the meter serve as electrode holders, to hold up to three electrodes simultaneously.

• Extremely versatile—the meter automatically recognizes which sensors you plug in so you can easily switch parameters whenever you want
• Select a meter with the number of channels you need (1, 2, or 3) and the sensors for the parameters you are measuring (pH, conductivity, or DO)
• Eliminate downtime with smart sensors that feature built-in calibration and measurement information
• Rugged, waterproof and dustproof housing with an IP67 rating for use in any environment
• Nonslip ergonomic design is comfortable to use and shock-proof and scratch-resistant
• Easily view measurements with large color graphic TFT-LCD, even in dim lighting or bright outdoor sunlight
• Download and analyze up to 10,0000 data points easily with micro USB
• Accurately measure pH, ORP and temperature

Includes

meter, pH sensor head, pH sensor cartridge, pH buffer set, four AA batteries, wireless SD card, and carrying case.

CPHP220 Portable pH/mV/ORP/°C/°F Meter by Citizen Scale

Citizen series meters includes models 220 for the measurement of acidity and alkalinity in liquids, These microprocessor-based meters are economical and easy to use, it has a large custom LCD for clear and easy reading.

Automatic Calibration

The meters is capable of calibration up to 3 points USA or NIST pH standard buffer. From Setup Menu, choose Calibration and immerse pH electrode into indcated calibration solution, press ENTER key and meter is automatically calibrated.

Power Monitor

During using. The CPU continuously monitors and displays the battery level, When the battery is running out of power, the battery icon will disappear from the LCD.

Hold Function

To keep the latest measurement on the display, after taking a reading press the HOLD key and the measurement remains on the display, your can easily view and record data.

Save and Communication Interface

CITIZEN series all have real-time dat/clock stamps, The memory stores up to 50 discrete data sets. Press the SAVE key to store the current measured values and it automatically generates a serial number with the data and time. This data can then be sent to a computer via the USB port.

695-ORP 2-Wire DC LCD ORP Transmitter, NEMA-4 Case by Jenco

2-wire 4-20 mA ORP transmitter in a sealed NEMA-4 enclosure with an LCD display powered by 11 to 80 Volts DC. Span is selectable any 100 to 1400 mV unit by dipswitch. Connections are BNC for ORP.

• Input/output isolated
• Nema 4x enclosure
• Large LCD display
• 4 to 20 mA output
• High accuracy
• BNC input connector
• High input impedance
• 4 to 20 mA output scalable to any 100mv unit span
• Wide range power supply ,12 to 80 VDC

SCT-108.002.02 SCT-ALLY Portable ORP Meter by ScichemTech

Includes:

• Portable ORP Meter
• ORP Electrode
• Plastic ORP combination electrode
• 222MV ORP standard solution
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP measurements.
• Built-in microprocessor chips, intelligent functions such as data storage, function set-up, automatic power-off and low voltage display.
• Equipped with plastic ORP electrode, fast response and accurate result.
• Equipped with ORP standard solution and portable case.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

ORP57 Pocket-size ORP / Temperature Meter with Replaceable Electrode by Milwaukee

Combination waterproof testers with advanced functions also include the new model pH58 for simultaneous pH and ORP measurements and temperature, which is continuously displayed on the dual level LCD.

It shows readings in an extended range from -2.00 to 16.00 pH or ±1000 mV and simultaneously shows temperature from -5.0 to 105.0°C or 23 to 221°F.

The pH58 has a stability indicator and hold feature that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations.

Calibration is performed automatically at 1 or 2 points using standard or NIST buffers.

The modular design allows easy electrode and battery replacement.

SCT-108.002.11 SCT DEON pH/ORP/Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combination electrode
• Plastic ORP combination electrode
• Plastic conductivity electrode
• DO electrode
z
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Membrane cap
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP, conductivity and dissolved oxygen measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Multi-parameter meter, equipped with pH electrode, ORP electrode, conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Automatic identification of 12 pH standard calibration solutions, three options of standard buffer solutions: Europe and America series & nist series
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

Mi106 pH / ORP / Temperature Professional Portable Meter by Milwaukee

The Mi106 multi parameter portable meter is ideal for field measurements.

The included combined pH/ORP electrode has a built-in temperature sensor and amplifier to prevent electrical interference.

The large display shows readings in an extended range from -2.00 to 16.00 pH or ±2000 mV and simultaneously shows temperature from -5.0 to 105.0°C or 23 to 221°F.

The Mi106 has a stability indicator and hold feature that freezes the display for easy and accurate recording.

The large display also has graphic symbols to guide you through all operations.

When switched ON it performs a self-check and displays the percentage of the remaining battery level to assure proper working condition.

Calibration is performed automatically at 1 or 2 points using standard or NIST buffers.

6010MKB Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000P 3-in-1 pH/ ATC Probe, 4-pin connector, Temp. 60º C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

WD-35660-10 PH250 Waterproof pH and ORP Handheld Meter Kit by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure pH, ORP and temperature

Includes

meter, electrode, calibration solutions, and 2 AA batteries.

Mi151 pH / ORP / Temperature Laboratory Bench Meter by Milwaukee

This high performance economy microprocessor-based pH/ORP/Temp Bench meter is an ideal tool in schools, laboratories and production plants. It is provided with a series of new diagnostic features which add an entirely new dimension to the measurement of pH, by allowing the user to dramatically improve the reliability of the measurement:

• Automatic Temperature Compensation (ATC) for good accuracy under fluctuating temperatures
• Hold Function freezes reading for easy viewing
• Easy to read large custom LCD
• Stability Indicator prompts whenever reading stabilizes
• 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45) for calibration
• Messages on the LCD to make the calibration easy and accurate
• User-selectable �calibration time out� to remind when a new calibration is necessary

Mi151 can also measure with ORP electrodes, thanks to its capability to measure mV with a resolution up to 0.1 mV. For accurate measurements, use the electrode holder supplied with the meter.

6360KC Handheld/Portable pH/ORP/Conductivity/Temperature Meter Kit by Jenco

Includes:

• 6350N: Conductivity mete
• 600P: pH/Ref. electrode
• 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter
• 6230F: Carrying Case with pH4, pH7 buffer capsule

6010NKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

CPHM921 Precision pH/mV/ORP/°C/°F Meter by Citizen Scale

CPHM92 Series meters includes models 920, 921, 922 it is a high accuracy meters used for measuring the pH and Oxidation-Reduction Potentital (ORP) of liquies.

Automatic Calibration

The meters is capable of calibrating up to 3 points using USA or NIST pH standard buffer. From Setup Menu, choose calibration and immerse pH electrode into calibration solution, press ENTER key and meter is automatically calibrated.

Automatic Electrode Slope Display

After calibration, the percentage slope of the electrode is displayed. According to the electrode indicator, you can decide whether the replace the pH electrode.

Save and Communication Interface

CPHM 92 Series have real-time date/clock stamps. The memory stores up to 99 discrete data sets. Press the SAVE key to store the current values and it automatically generates a serial number with the date and time. This data can then be sent to a computer via the USB port.

Fluid Resistant Housing and Swivel Electrode Holder

The integrated plastic housing and keypad is sealed to protect against accidental spills and splashes. The electrode holder arm is rapidly switched to both sides and swivels and articulates for convenient use and positioning.

PM1000 SensoLab Benchtop pH/ORP Meter by Sensorex

The new SensoLab Series Benchtop pH/ORP Meter is the perfect solution for a range of applications from instructional chemistry laboratories to quality control testing. Our waterproof pH and ORP meter helpfully prompts you through the calibration and measurement procedures, and includes the optional AUTOLOCK feature to ensure repeatable and reliable pH and mV measurements. This versatile meter can be powered in two ways, either with 6 AAA batteries to save your valuable bench space or with an AC power cable. Use with any of our Laboratory pH Eletrodes or ORP Sensors.

Features:

• Simple, easy-to-read user interface
• Measure pH or ORP and Temperature simultaneously
• AUTOLOCK feature for reliable measurements
• Waterproof case
• Single, dual, or three point calibration
• Automatic or manual temperature compensation

WD-35660-12 PH260 Waterproof pH and ORP Handheld Meter Kit by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure pH, ORP and temperature

Includes

meter, electrode, calibration solutions, and 2 AA batteries.

WD-35660-34 PH250 Waterproof pH and ORP Handheld Meter by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure pH, ORP and temperature

Includes

meter, and 2 AA batteries.