Microvision

MVT1PX-XXX MicroVision Timer with 4 Selectable Timers by Quantrol

The MicroVision Timer is a microprocessor-based selectable timer controller. Designed specifically for timer based control applications, MicroVision Timer comes standard with the features and functions you need for accurate timer based control. The MicroVision Timer is a full function controller in a compact package that won't break your budget!

Features

• Large graphical display.
• Statistics screen with relay run time.
• Battery backup.
• Five digital inputs.
• Timer #1 output supports solenoid valve or motorized valve for bleed control.

Operating Benefits

• Easy to use.
• Can be programmed in Pulse mode, Percent mode, 28 day biocide timer mode, Cycle mode
• Reduced potential for fouling.
• Easy Installation.
• Two year warranty.
• Compact size saves space and freight charge.

Controls

Programmable Inputs

• Drum level inputs
• Water meter inputs
• Hall effect input

Programmable Timers

• Output type
• 28 day
• Pulse
• Percent
• Cycle
• System Alarm

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVBXPHXS025-XXX MicroVision Single Boiler Blowdown Controller by Quantrol

The MicroVision Boiler Controller delivers comprehensive boiler water control with 'plug & play' simplicity, at an outstanding value. This latest addition to the MicroVision family of controllers is configured specifically for boiler water control, and utilizes intuitive software which provides simple set-up, while providing state of the art maintenance of the water in your boiler. Features of this device include a reliable temperature compensated conductivity probe, 5 output relays with selectable timers, scalable 4-20mA output to report conductivity, hall-effect and pulse water meter inputs, digital drum levels and a boiler interlock input.

Pulsafeeder's line of Boiler Controllers are designed for simplicity and reliability. Offering affordable, high performance Boiler Controllers that are easy to specify and easy to use. Pulsafeeder Boiler Controllers offer versatile solutions to your fluid control problems. With selectable sampling modes, powered relays, selectable timers, and inputs to fit your needs. Pulsafeeder's MicroVision Boiler controller increases energy efficiency, reduces water consumption, reduces manpower and optimizes chemical utilization.

Features & Benefits

Simple Programming

• Factory preset to operate in timed sample mode right out of the box
• Intuitive menus make program alterations easy and understandable

Easy Installation and Easy to Use

• Pre-wired and conduit connections options make easy installation
• Large graphical display with status screen for instant access to system information
• LED function indicators
• Touch pad program keys provide clear and precise system information

Reliable Conductivity Probe

• Standard conductivity probe is rugged and reliable
• Temperature compensated for accurate readings from 0-20,000 μS

Selectable Sampling Modes

• Continuous
• Timed Sample
• Sample & Hold

5 Output Relays

• 1 powered relay for motorized ball valves or solenoid blowdown valves
• 3 powered relays for chemical metering pumps
• 1 dry contact relay for remote alarm

Selectable Timers

• Pulse
• Limit
• Percent
• 28 day
• Cycle

5 Digital Inputs

• 5 digital inputs total
• Drum level
• Dry contact water meter
• Hall effect
• Boiler interlock

4-20mA Output

• Isolated
• Scalable

Heavy Duty Enclosure

• NEMA 4X rated
• Easy Installation

MVECXXXPA-XXX-XXX MicroVision ^EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, 3 Timers by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVS1PA-XXX MicroVision Cooling Tower Controller, Toroidal Probe, Standard Panel, 3 Timers, 4-20, Flow & Panel by Quantrol

MicroVision Conductivity Cooling Tower Controller Standard with Toroidal Sensor Technology!

The MicroVision is a microprocessor-based conductivity controller with selectable timer and dual biocide control. Designed specifically for cooling tower applications, MicroVision comes standard with the features and functions you need for accurate monitoring and control of cooling tower water. The MicroVision is a full function controller in a compact package that won't break your budget!

Features

• Toroidal conductivity sensor.
• Large graphical display with large, easy to read font.
• Statistics screen with relay run time.
• Flow switch input.
• (3) drum level inputs.
• 4-20 mA isolated analog output.
• Dry contact alarm output
• Battery backup.
• Selectable timer (limit, %, % post bleed with limit, and water meter).
• Dry contact/Hall Effect water meter input.
• Dual biocide control.
• Bleed output supports solenoid valve or motorized ball valve.

Operating Benefits

• Easy to use.
• No need to recalibrate.
• Reduced potential for fouling.
• Easy Installation.
• Two year warranty.
• Large range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

Feed

• Inhibitor

Biocides

• Dual biocide with pre-bleed, lockout, inhibitor interface, and four programmable start times per biocide

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVECOXXPA-EXX-XXX MicroVision ^EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, ORP, 6 Timers, PULSAlink Communications by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVECXXXPA-EPX-XXX MicroVision ^EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, 2 Timers, PULSAlink Communications, Pyxis PTSA by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVECXXXPA-EXX-XXX MicroVision ^EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, 3 Timers, PULSAlink Communications by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVS1PC-XXX MicroVision Cooling Tower Controller, Toroidal Probe, MV Tower, Cond Bleed, 3 Selectable Timers, 2 Shelves, In/Out Ball Valves, Y-Strainer, Inj Tees, Rails - No Pumps by Quantrol

MicroVision Conductivity Cooling Tower Controller Standard with Toroidal Sensor Technology!

The MicroVision is a microprocessor-based conductivity controller with selectable timer and dual biocide control. Designed specifically for cooling tower applications, MicroVision comes standard with the features and functions you need for accurate monitoring and control of cooling tower water. The MicroVision is a full function controller in a compact package that won't break your budget!

Features

• Toroidal conductivity sensor.
• Large graphical display with large, easy to read font.
• Statistics screen with relay run time.
• Flow switch input.
• (3) drum level inputs.
• 4-20 mA isolated analog output.
• Dry contact alarm output
• Battery backup.
• Selectable timer (limit, %, % post bleed with limit, and water meter).
• Dry contact/Hall Effect water meter input.
• Dual biocide control.
• Bleed output supports solenoid valve or motorized ball valve.

Operating Benefits

• Easy to use.
• No need to recalibrate.
• Reduced potential for fouling.
• Easy Installation.
• Two year warranty.
• Large range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

Feed

• Inhibitor

Biocides

• Dual biocide with pre-bleed, lockout, inhibitor interface, and four programmable start times per biocide

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVS1PD-XXX MicroVision Cooling Tower Controller, Toroidal Probe, MV Tower, Cond Bleed, 3 Selectable Timers, 3 Shelves, In/Out Ball Valves, Y-Strainer, Inj Tees, Rails - No Pumps by Quantrol

MicroVision Conductivity Cooling Tower Controller Standard with Toroidal Sensor Technology!

The MicroVision is a microprocessor-based conductivity controller with selectable timer and dual biocide control. Designed specifically for cooling tower applications, MicroVision comes standard with the features and functions you need for accurate monitoring and control of cooling tower water. The MicroVision is a full function controller in a compact package that won't break your budget!

Features

• Toroidal conductivity sensor.
• Large graphical display with large, easy to read font.
• Statistics screen with relay run time.
• Flow switch input.
• (3) drum level inputs.
• 4-20 mA isolated analog output.
• Dry contact alarm output
• Battery backup.
• Selectable timer (limit, %, % post bleed with limit, and water meter).
• Dry contact/Hall Effect water meter input.
• Dual biocide control.
• Bleed output supports solenoid valve or motorized ball valve.

Operating Benefits

• Easy to use.
• No need to recalibrate.
• Reduced potential for fouling.
• Easy Installation.
• Two year warranty.
• Large range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

Feed

• Inhibitor

Biocides

• Dual biocide with pre-bleed, lockout, inhibitor interface, and four programmable start times per biocide

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVECOXXPA-EPX-XXX MicroVision ^EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, ORP, 5 Timers, PULSAlink Communications, Pyxis PTSA by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVECOXXPD-EPX-XXX MicroVision EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, ORP, 5 Timers, PULSAlink Communications, Pyxis PTSA Includes controller, shelves, in/out ball valves, y-strainer, inj tees, rails - no pumps by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVECOXXPD-EXX-XXX MicroVision EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, ORP, 6 Timers, PULSAlink Communications Includes controller, shelves, in/out ball valves, y-strainer, inj tees, rails - no pumps by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVECXXXPD-EPX-XXX MicroVision EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, 2 Timers, PULSAlink Communications, Pyxis PTSA Includes controller, shelves, in/out ball valves, y-strainer, inj tees, rails - no pumps by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVECXXXPD-EXX-XXX MicroVision EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, 3 Timers, PULSAlink Communications Includes controller, shelves, in/out ball valves, y-strainer, inj tees, rails - no pumps by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MVECXXXPD-XXX-XXX MicroVision EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, 3 Timers Includes controller, shelves, in/out ball valves, y-strainer, inj tees, rails - no pumps by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

DGF1BAAACXB Pulsafeeder Digital Glycol Feeder, 50 Gallon with Alarm Dry Contact by Quantrol

Pulsafeeder's Digital Glycol Feeder provides a consistent operating pressure in closed loop systems. This allows a controlled percentage of glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder is available in two models; the DGF1 for single loop and the DGF2 for dual loop systems.

The control unit utilizes an 8-bit microcontroller for precise feed system control. The NEMA4X enclosure can be wired conduit or prewire for easy startup. The preplumbed assembly includes a pressure gauge, pressure switch, and pressure relief valve to prevent excessive pressure build up. A low liquid level switch with optional audible alarm prevents the gear pump from operating when the solution is low.

Each Digital Glycol Feeder is fully piped and wired with the following components:

Suction Assembly includes:

• PVC tubing and fittings
• PVC ball valve
• Clear poly bowl strainer

Discharge Assembly Includes:

• PVC pipe and fittings
• PVC ball valve
• PVC check valve
• Pressure gauge
• Brass relief valve with return to tank tubing

Controller Features

• Compact NEM4X enclosure for industrial applications
• Touch keypad user interface for gear pump operation
• LED indicators loss of pressure and low level
• HOA control of pumps and alarm to force relay OFF indefinitely or force relay ON for a period of 5 minutes
• Alarm silence feature
• Dual alarm relay outputs are factory configured for dry contact or powered
• Available in 115V or 230V
• Agency approved for US and Canada

Pump Features

• Heavy duty gear pump
• Bronze and stainless steel wetted components
• Close tolerance design allows for consistent performance
• Helical gears for quiet operation

System Features

• Economical design for competitive bid specifications

DGF1BAXACXB Pulsafeeder Digital Glycol Feeder, 50 Gallon by Quantrol

Pulsafeeder's Digital Glycol Feeder provides a consistent operating pressure in closed loop systems. This allows a controlled percentage of glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder is available in two models; the DGF1 for single loop and the DGF2 for dual loop systems.

The control unit utilizes an 8-bit microcontroller for precise feed system control. The NEMA4X enclosure can be wired conduit or prewire for easy startup. The preplumbed assembly includes a pressure gauge, pressure switch, and pressure relief valve to prevent excessive pressure build up. A low liquid level switch with optional audible alarm prevents the gear pump from operating when the solution is low.

Each Digital Glycol Feeder is fully piped and wired with the following components:

Suction Assembly includes:

• PVC tubing and fittings
• PVC ball valve
• Clear poly bowl strainer

Discharge Assembly Includes:

• PVC pipe and fittings
• PVC ball valve
• PVC check valve
• Pressure gauge
• Brass relief valve with return to tank tubing

Controller Features

• Compact NEM4X enclosure for industrial applications
• Touch keypad user interface for gear pump operation
• LED indicators loss of pressure and low level
• HOA control of pumps and alarm to force relay OFF indefinitely or force relay ON for a period of 5 minutes
• Alarm silence feature
• Dual alarm relay outputs are factory configured for dry contact or powered
• Available in 115V or 230V
• Agency approved for US and Canada

Pump Features

• Heavy duty gear pump
• Bronze and stainless steel wetted components
• Close tolerance design allows for consistent performance
• Helical gears for quiet operation

System Features

• Economical design for competitive bid specifications

DGF1BBAACXB Pulsafeeder Digital Glycol Feeder, 50 Gallon with Audible Alarm & Dry Contact by Quantrol

Pulsafeeder's Digital Glycol Feeder provides a consistent operating pressure in closed loop systems. This allows a controlled percentage of glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder is available in two models; the DGF1 for single loop and the DGF2 for dual loop systems.

The control unit utilizes an 8-bit microcontroller for precise feed system control. The NEMA4X enclosure can be wired conduit or prewire for easy startup. The preplumbed assembly includes a pressure gauge, pressure switch, and pressure relief valve to prevent excessive pressure build up. A low liquid level switch with optional audible alarm prevents the gear pump from operating when the solution is low.

Each Digital Glycol Feeder is fully piped and wired with the following components:

Suction Assembly includes:

• PVC tubing and fittings
• PVC ball valve
• Clear poly bowl strainer

Discharge Assembly Includes:

• PVC pipe and fittings
• PVC ball valve
• PVC check valve
• Pressure gauge
• Brass relief valve with return to tank tubing

Controller Features

• Compact NEM4X enclosure for industrial applications
• Touch keypad user interface for gear pump operation
• LED indicators loss of pressure and low level
• HOA control of pumps and alarm to force relay OFF indefinitely or force relay ON for a period of 5 minutes
• Alarm silence feature
• Dual alarm relay outputs are factory configured for dry contact or powered
• Available in 115V or 230V
• Agency approved for US and Canada

Pump Features

• Heavy duty gear pump
• Bronze and stainless steel wetted components
• Close tolerance design allows for consistent performance
• Helical gears for quiet operation

System Features

• Economical design for competitive bid specifications

DGF1BBXACXB Pulsafeeder Digital Glycol Feeder, 50 Gallon with Audible Alarm by Quantrol

Pulsafeeder's Digital Glycol Feeder provides a consistent operating pressure in closed loop systems. This allows a controlled percentage of glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder is available in two models; the DGF1 for single loop and the DGF2 for dual loop systems.

The control unit utilizes an 8-bit microcontroller for precise feed system control. The NEMA4X enclosure can be wired conduit or prewire for easy startup. The preplumbed assembly includes a pressure gauge, pressure switch, and pressure relief valve to prevent excessive pressure build up. A low liquid level switch with optional audible alarm prevents the gear pump from operating when the solution is low.

Each Digital Glycol Feeder is fully piped and wired with the following components:

Suction Assembly includes:

• PVC tubing and fittings
• PVC ball valve
• Clear poly bowl strainer

Discharge Assembly Includes:

• PVC pipe and fittings
• PVC ball valve
• PVC check valve
• Pressure gauge
• Brass relief valve with return to tank tubing

Controller Features

• Compact NEM4X enclosure for industrial applications
• Touch keypad user interface for gear pump operation
• LED indicators loss of pressure and low level
• HOA control of pumps and alarm to force relay OFF indefinitely or force relay ON for a period of 5 minutes
• Alarm silence feature
• Dual alarm relay outputs are factory configured for dry contact or powered
• Available in 115V or 230V
• Agency approved for US and Canada

Pump Features

• Heavy duty gear pump
• Bronze and stainless steel wetted components
• Close tolerance design allows for consistent performance
• Helical gears for quiet operation

System Features

• Economical design for competitive bid specifications

MTC1PTA-XXX MicroTrac Series Tower Controllers with Toroidal Probe, Bleed & Selectable Feed, Flow Assembly, Panel by Quantrol

The MicroTrac is a microprocessor based feed and bleed toroidal conductivity controller designed to control conductivity and feed inhibitor in cooling tower systems. Featuring innovative toroidal sensor technology, the MicroTrac provides an economical control platform that is not susceptible to sensor fouling and never requires calibration! The MicroTrac toroidal conductivity sensor is factory calibrated for the life of the probe eliminating routine calibrations saves you valuable service time and money. By design, the MicroTrac toroidal conductivity sensor has no exposed electrodes, which means that there is nothing to wear out or foul. When installed according to the manufacturer's instructions, the need for routine sensor removal and cleaning is virtually eliminated.

The MicroTrac measures the conductivity of the cooling tower recirculating water via a toroidal conductivity sensor. The controller activates two independent relay outputs based on bleed and a selectable feed mode of operation. The MicroTrac conductivity controller has a 0 - 9,999 μS/cm range, making it ideal for other applications as well, such as rinse, industrial process, wastewater, etc.

Features

• Selectable rising or falling setpoint for open or closed loop control.
• Water meter pulse timer.
• Percent timer.
• % post bleed timer.
• Limit timer.

Operating Benefits

• Easy to use.
• No need to recalibrate.
• Reduced potential for fouling.
• Easy Installation.
• Two year warranty.
• Large range: 0 - 9,999 μS/cm.
• Simple user interface.

Controls

Timers

• Water Meter Pulse Timer
• Percent Timer
• % Post Bleed Timer
• Limit Timer

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)