Micro 5 Battery

Multi-gas Monitor with PID capability for VOC's

Build to order

• Smaller and over 50% lighter than competitive instruments
• Water-resistant design in an integral concussion-proof enclosure
• Continuous LCD shows simultaneous gas concentrations for five gases0 - 1000 ppm measurement of VOCs (Volatile Organic Compounds)
• Integral motorized pump option for remote samplingTwo power options: AA alkaline or rechargeable hot-swappable battery pack
• Provides 95 dB alarm tone and two bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Multi-language support in English, French, German, Spanish, and Portuguese
• Three backlight options: standard- activates in low light (auto), in alarm (auto) and reactivates on-demand; alarm only- activates in alarm conditions and reactivates on-demand; stealth mode
• Four alarm levels: instantaneous Low and High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for VOCs and toxic gases
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Records TWA, STEL, and maximum exposures to gas and displays readings on command
• User selectable field options include: PID correction factor, language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, pass code protection, latching alarm, 'SAFE' display function, stealth mode, and selectable ppm resolution for some gases (e.g. SO2 0.1 ppm)
• Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms

5 Gas Monitor with optional sampling pump

Build to order

72-0291-69-A Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO Base, Alkaline Battery Pack Only by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0290-27-A GX-2012 Confined Space Multi Gas Monitor, 5 Sensor, LEL/% Volume CH4/O2/H2S/CO Base, Alkaline Battery Pack Only by RKI Instruments

Built around high-quality micro-sensor technology, the GX-2012 is RKI's smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, the GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). When equipped with an optional sensor, it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. With this version, the GX-2012 can be used for gas line purge testing as well as standard safety testing, and includes two operating modes: Normal (for confined spaces) and Bar Hole.

The GX-2012's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or nonlatching. Controlled by a microprocessor, the GX-2012 continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-2012 can interchangeably operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The GX-2012 is also compatible with the economical SDM-2012 single channel calibration station.

Features

• Monitors LEL, and % volume methane, O2, CO and H2S
• 0 to 100% volume methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Pump pause on demand extends battery life
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline power source (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWA and STEL readings with lunch-break mode
• ntrinsically safe, ATEX/IECEX/CE, c CSA us (pending)
• High dust and water resistance design
• 2 year warranty

Applications

• Personal monitoring
• Confined space entry
• Refineries / petrochemical
• Chemical plants
• Hazardous material
• Water / wastewater treatment
• Fire services
• Mining

*Please note we can only ship RKI products to customers within the United States

72-0291-69-C Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO Base, Li-Ion Battery Pack Only with 100-240 VAC Charger (Alkaline battery pack not included) by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69-D Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO Base, Li-Ion Battery Pack Only with 12 VDC Charger (Alkaline battery pack not included) by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69-F Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO Base, Li-Ion Battery Pack Only with 100-240 VAC/12 VDC Charger (Alkaline battery pack not included) by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69H-C Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO (with H2S response, no charcoal filter) Base, Li-Ion Battery Pack Only with 100-240 VAC Charger (Alkaline battery pack not included) by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69H-D Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO (with H2S response, no charcoal filter) Base, Li-Ion Battery Pack Only with 12 VDC Charger (Alkaline battery pack not included) by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69H-F Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO (with H2S response, no charcoal filter) Base, Li-Ion Battery Pack Only with 100-240 VAC/12 VDC Charger (Alkaline battery pack not included) by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0290-27-C GX-2012 Confined Space Multi Gas Monitor, 5 Sensor, LEL/% Volume CH4/O2/H2S/CO Base, Li-Ion Battery Pack Only with 100-240 VAC Charger (Alkaline battery pack not included) by RKI Instruments

Built around high-quality micro-sensor technology, the GX-2012 is RKI's smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, the GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). When equipped with an optional sensor, it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. With this version, the GX-2012 can be used for gas line purge testing as well as standard safety testing, and includes two operating modes: Normal (for confined spaces) and Bar Hole.

The GX-2012's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or nonlatching. Controlled by a microprocessor, the GX-2012 continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-2012 can interchangeably operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The GX-2012 is also compatible with the economical SDM-2012 single channel calibration station.

Features

• Monitors LEL, and % volume methane, O2, CO and H2S
• 0 to 100% volume methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Pump pause on demand extends battery life
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline power source (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWA and STEL readings with lunch-break mode
• ntrinsically safe, ATEX/IECEX/CE, c CSA us (pending)
• High dust and water resistance design
• 2 year warranty

Applications

• Personal monitoring
• Confined space entry
• Refineries / petrochemical
• Chemical plants
• Hazardous material
• Water / wastewater treatment
• Fire services
• Mining

*Please note we can only ship RKI products to customers within the United States

72-0290-27-D GX-2012 Confined Space Multi Gas Monitor, 5 Sensor, LEL/% Volume CH4/O2/H2S/CO Base, Li-Ion Battery Pack Only with 12 VDC Charger (Alkaline battery pack not included) by RKI Instruments

Built around high-quality micro-sensor technology, the GX-2012 is RKI's smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, the GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). When equipped with an optional sensor, it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. With this version, the GX-2012 can be used for gas line purge testing as well as standard safety testing, and includes two operating modes: Normal (for confined spaces) and Bar Hole.

The GX-2012's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or nonlatching. Controlled by a microprocessor, the GX-2012 continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-2012 can interchangeably operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The GX-2012 is also compatible with the economical SDM-2012 single channel calibration station.

Features

• Monitors LEL, and % volume methane, O2, CO and H2S
• 0 to 100% volume methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Pump pause on demand extends battery life
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline power source (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWA and STEL readings with lunch-break mode
• ntrinsically safe, ATEX/IECEX/CE, c CSA us (pending)
• High dust and water resistance design
• 2 year warranty

Applications

• Personal monitoring
• Confined space entry
• Refineries / petrochemical
• Chemical plants
• Hazardous material
• Water / wastewater treatment
• Fire services
• Mining

*Please note we can only ship RKI products to customers within the United States

72-0290-27-F GX-2012 Confined Space Multi Gas Monitor, 5 Sensor, LEL/% Volume CH4/O2/H2S/CO Base, Li-Ion Battery Pack Only with 100-240 VAC/12 VDC Charger (Alkaline battery pack not included) by RKI Instruments

Built around high-quality micro-sensor technology, the GX-2012 is RKI's smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, the GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). When equipped with an optional sensor, it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. With this version, the GX-2012 can be used for gas line purge testing as well as standard safety testing, and includes two operating modes: Normal (for confined spaces) and Bar Hole.

The GX-2012's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or nonlatching. Controlled by a microprocessor, the GX-2012 continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-2012 can interchangeably operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The GX-2012 is also compatible with the economical SDM-2012 single channel calibration station.

Features

• Monitors LEL, and % volume methane, O2, CO and H2S
• 0 to 100% volume methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Pump pause on demand extends battery life
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline power source (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWA and STEL readings with lunch-break mode
• ntrinsically safe, ATEX/IECEX/CE, c CSA us (pending)
• High dust and water resistance design
• 2 year warranty

Applications

• Personal monitoring
• Confined space entry
• Refineries / petrochemical
• Chemical plants
• Hazardous material
• Water / wastewater treatment
• Fire services
• Mining

*Please note we can only ship RKI products to customers within the United States

72-0291-69-B Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO Base, Alkaline and Li-Ion Battery Pack with 100-240 VAC Charger by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69-E Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO Base, Alkaline and Li-Ion Battery Pack with 12 VDC Charger by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69-G Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO Base, Alkaline and Li-Ion Battery Pack with 100-240 VAC/12 VDC Charger by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69-H Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO Base, Li-Ion Battery Pack Only with No Charger by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69H-A Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO (with H2S response, no charcoal filter) Base, Alkaline Battery Pack Only by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0290-27-B GX-2012 Confined Space Multi Gas Monitor, 5 Sensor, LEL/% Volume CH4/O2/H2S/CO Base, Alkaline and Li-Ion Battery Pack with 100-240 VAC Charger by RKI Instruments

Built around high-quality micro-sensor technology, the GX-2012 is RKI's smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, the GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). When equipped with an optional sensor, it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. With this version, the GX-2012 can be used for gas line purge testing as well as standard safety testing, and includes two operating modes: Normal (for confined spaces) and Bar Hole.

The GX-2012's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or nonlatching. Controlled by a microprocessor, the GX-2012 continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-2012 can interchangeably operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The GX-2012 is also compatible with the economical SDM-2012 single channel calibration station.

Features

• Monitors LEL, and % volume methane, O2, CO and H2S
• 0 to 100% volume methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Pump pause on demand extends battery life
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline power source (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWA and STEL readings with lunch-break mode
• ntrinsically safe, ATEX/IECEX/CE, c CSA us (pending)
• High dust and water resistance design
• 2 year warranty

Applications

• Personal monitoring
• Confined space entry
• Refineries / petrochemical
• Chemical plants
• Hazardous material
• Water / wastewater treatment
• Fire services
• Mining

*Please note we can only ship RKI products to customers within the United States

72-0290-27-E GX-2012 Confined Space Multi Gas Monitor, 5 Sensor, LEL/% Volume CH4/O2/H2S/CO Base, Alkaline and Li-Ion Battery Pack with 12 VDC Charger by RKI Instruments

Built around high-quality micro-sensor technology, the GX-2012 is RKI's smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, the GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). When equipped with an optional sensor, it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. With this version, the GX-2012 can be used for gas line purge testing as well as standard safety testing, and includes two operating modes: Normal (for confined spaces) and Bar Hole.

The GX-2012's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or nonlatching. Controlled by a microprocessor, the GX-2012 continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-2012 can interchangeably operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The GX-2012 is also compatible with the economical SDM-2012 single channel calibration station.

Features

• Monitors LEL, and % volume methane, O2, CO and H2S
• 0 to 100% volume methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Pump pause on demand extends battery life
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline power source (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWA and STEL readings with lunch-break mode
• ntrinsically safe, ATEX/IECEX/CE, c CSA us (pending)
• High dust and water resistance design
• 2 year warranty

Applications

• Personal monitoring
• Confined space entry
• Refineries / petrochemical
• Chemical plants
• Hazardous material
• Water / wastewater treatment
• Fire services
• Mining

*Please note we can only ship RKI products to customers within the United States

72-0290-27-G GX-2012 Confined Space Multi Gas Monitor, 5 Sensor, LEL/% Volume CH4/O2/H2S/CO Base, Alkaline and Li-Ion Battery Pack with 100-240 VAC/12 VDC Charger by RKI Instruments

Built around high-quality micro-sensor technology, the GX-2012 is RKI's smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, the GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). When equipped with an optional sensor, it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. With this version, the GX-2012 can be used for gas line purge testing as well as standard safety testing, and includes two operating modes: Normal (for confined spaces) and Bar Hole.

The GX-2012's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or nonlatching. Controlled by a microprocessor, the GX-2012 continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-2012 can interchangeably operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The GX-2012 is also compatible with the economical SDM-2012 single channel calibration station.

Features

• Monitors LEL, and % volume methane, O2, CO and H2S
• 0 to 100% volume methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Pump pause on demand extends battery life
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline power source (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWA and STEL readings with lunch-break mode
• ntrinsically safe, ATEX/IECEX/CE, c CSA us (pending)
• High dust and water resistance design
• 2 year warranty

Applications

• Personal monitoring
• Confined space entry
• Refineries / petrochemical
• Chemical plants
• Hazardous material
• Water / wastewater treatment
• Fire services
• Mining

*Please note we can only ship RKI products to customers within the United States

72-0290-27-H GX-2012 Confined Space Multi Gas Monitor, 5 Sensor, LEL/% Volume CH4/O2/H2S/CO Base, Li-Ion Battery Pack Only with No Charger by RKI Instruments

Built around high-quality micro-sensor technology, the GX-2012 is RKI's smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, the GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). When equipped with an optional sensor, it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. With this version, the GX-2012 can be used for gas line purge testing as well as standard safety testing, and includes two operating modes: Normal (for confined spaces) and Bar Hole.

The GX-2012's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or nonlatching. Controlled by a microprocessor, the GX-2012 continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-2012 can interchangeably operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The GX-2012 is also compatible with the economical SDM-2012 single channel calibration station.

Features

• Monitors LEL, and % volume methane, O2, CO and H2S
• 0 to 100% volume methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Pump pause on demand extends battery life
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline power source (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWA and STEL readings with lunch-break mode
• ntrinsically safe, ATEX/IECEX/CE, c CSA us (pending)
• High dust and water resistance design
• 2 year warranty

Applications

• Personal monitoring
• Confined space entry
• Refineries / petrochemical
• Chemical plants
• Hazardous material
• Water / wastewater treatment
• Fire services
• Mining

*Please note we can only ship RKI products to customers within the United States

72-0291-69H-B Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO (with H2S response, no charcoal filter) Base, Alkaline and Li-Ion Battery Pack with 100-240 VAC Charger by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States

72-0291-69H-E Gas Tracer Confined Space/Leak Detector, 5 Sensor, PPM CH4/LEL/% volume CH4/O2/CO (with H2S response, no charcoal filter) Base, Alkaline and Li-Ion Battery Pack with 12 VDC Charger by RKI Instruments

Built around high-quality micro-sensortechnology, the GasTraceris RKI's smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.

The Gas Tracer's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Other standard mode alarm types include vibration, visual, and audible alarms that can be set to latching or non-latching. Controlled by a microprocessor, the Gas Tracer continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The Gas Tracer can operate on either a Li-Ion battery pack or an alkaline battery pack. The batteries are simple to replace requiring no tools to access the removable battery compartment or pack. Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. The Gas Tracer is also compatible with the economical SDM-2012 single channel calibration station.

Features:

• Monitors ppm, LEL, and % volume methane, O2 and CO
• ppm leak detector, detects down to 10 ppm CH
• "Leak tracker" audible/visual alarm mode for CH4 and CO
• 0 to 100% volume Methane option
• Auto-ranging display of % LEL and % volume
• Barhole test mode
• Bump test reminder option
• Snap-logging - on demand data recording
• Pump pause on demand extends battery life
• Status indicators: Pump active, microprocessor status and battery level
• Internal sample drawing pump with up to 50 foot range
• Vibration, visual, and audible alarms
• Automatic backlight during alarms
• Calibration reminder with lock out option
• Lithium ion or alkaline battery packs (interchangeable)
• Quick charge
• Glove friendly large buttons
• Alarm latching or non-latching
• High impact protective rubber overmolding
• Up to 600 hours of datalogging with alarm trends
• Autocalibration or single calibration
• TWAand STEL readings with lunch-break mode
• Intrinsically safe,ATEX/IECEx/CE and c CSAus (pending)
• High dust and water resistance design
• 2 year warranty

*Please note we can only ship RKI products to customers within the United States