Hibernation Case

BWC2-H510 BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 5 ppm / High - 10 ppm by BW Technologies

If you need hydrogen sulphide gas detection in your line of work, you want the most dependable H2S testing unit you can find, and the 2 year BW Clip BWCH510 is one of the best in the industry. Once you turn it on, there is no need to shut it off. It is designed to run constantly for 2 to 3 years and is virtually maintenance free. You won't have to calibrate, change batteries, charge batteries, or replace the sensor.

Not using the BW Clip? It can easily be stored in its hibernation case, and this will extend its life. For example, a 30 day storage will extend the life by 30 days.

Your BW Clip gas detector is fully compatible with Fleet Manager II software and MicroDock instrument management systems. Plus, if you utilize an IntelliDoX management system you can receive these added benefits:

• Test five units at once
• No computer needed
• Simple fleet management and recordkeeping
• Alarm and parameters adjustment
• Quickest bump test on the market today

Additional technologies that ensure compliance, safety, and maximum productivity:

• Self testing capabilities with Reflex Technology™ each day (24 hours), the BW clip will perform internal testing to insure it is in peak operating conditions. This will keep downtime to a minimum and help maintain a safe work environment.
• Surecell™ dual reservoir technology enjoy extremely quick response times. Much faster and efficient than standard electromechanical sensors. And the BW clip is made to function in the toughest of environments.

Standard features:

• Light, compact, and easy to use
• Inexpensive operating costs
• Maintenance free (one push button) operation
• 95 decibel alarm that also vibrates and flashes, for maximum safety
• Ability to log 35 gas events and bump tests
• Electronics, sensor, and battery, are all self-testing
• Rated for harsh working conditions non condensing means it will function well in areas of extreme humidity and in temperatures as high as 122F or low as -40F.
• Warranty 2 years and up to an additional year of shelf life
• Low level alarm is 5 ppm and high level is 10 ppm

Alarm Configurations:

• Alarm plus gas level reading
• Current time
• Tells you when a bump test is due user can set or can be set by management software

Part Number: BWC2H510

BW Technologies Hibernation Case for BW Clip

Part Number: ClipHBCase

BWC3R-M BW Clip RT 3 Year Single Gas Detector, Carbon Monoxide (CO), (Low 35 ppm / High 200 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3R-M

BW Technologies Hibernation Case for BW Clip (50-unit Bulk Package)

Part Number: ClipHBCaseB50

096-3467-01 Protege ZM Portable Test Station by 3M

The Protege ZM Portable Test Station performs bumping, calibrating, programming and hibernating of up to four Protege ZM monitors simultaneously.

The test station stores monitor event data and test data logs. It is designed to be used with 34 - 103L bottles of calibration gas available from 3M.

Features

• Connect four Protege ZM monitors at once
• Automatically configure monitors during testing
• Simple two button operation
• Dedicated Pass/Fail LEDs for report results
• Records data on onboard memory
• Configurable calibration gas settings
• Rechargeable battery and durable case
• Built-in regulator and gas pressure gauge

A gas detector with unequalled performance and custom options

 

Do you need a more efficient way to manage your gas detector fleet? Now you can use the IntelliDox smart docking system with your Fleet Manager II program. This automates the process to make you more productive and efficient.

Easy management combined with greater productivity

Installing IntelliDoX is fast and easy. It only takes a few minutes to set up the 5-unit docking system. It's simple to multi-task because every module can operate independently with its own screen, pump, and operating system. It's possible to calibrate 4 units while bump testing another one, so you increase efficiency and save time.

Configuration flexibility for changing needs

With the new IntellDox smart docking system, you control many of the settings. This includes alarm for high and low parameters. Your detector equipment will always meet your specifications.

Simplify data management and networking

Data transfer is quick and simple. Store and transfer gas detection info like bump tests via Ethernet cable or USB.

• Take customizing to an entirely new level
• Modules can be expanded to five units
• Setup is uncomplicated and fast
• Many options, including worker compliance tracking

 

Compatible units

GasAlertMicroClip Series
BW Clip Series
ConneX1

 

Outstanding Bump Test Performance

Bump testing has never been easier or more efficient. With the help of FastBump, you can quickly bump test your detectors while saving on bump test gas. It revolutionizes the bump testing process.

Features:

• Now you can calibrate, bump test, configure, and track data with compatible gas detectors. Users can update these settings: Display Gas Concentration Readings with Alarm; Change Alarm Settings; Time Display Preferences; Transfer Event Logs Data; Non-compliance Indicator Enabling; Hibernate unit; Schedule Reminders for Bump Tests and Calibration; Firmware update
• Modules have their own keypads and LCD screens - gangable up to 5 units
• Ethernet port for easy network connection
• Change module settings or transfer data via USB port - no network connection needed.
• Best in the industry FastBump Test - eliminates wasteful purge cycles and bottlenecks
• Easy setup - you don't need any tools
• No need for manual bump testing or calibration

 

Specs for IntelliDoX

Size (w x h x d): 5.4 x 14.2 x 4.3 in. (13.8 x 36.2 x 10.9 cm) (individual docking module)
Weight: 4.2 lb (1.91 kg)
Power supply: 12 V / 8.33A ITE
Real-time clock: Time and date stamp
Communications method: 2-way (infrared) communications between docking module and detector

External interface

• One USB port
• One Ethernet port

 

Menu navigation

• Display settings
• Time and date
• Gas inlets
• Review IntelliDoX module
• Password protect (when enabled)
• UI display language: English, French, German, Portuguese and Spanish options

 

Automatic testing

• FastBump - ten seconds
• Standard bump - forty seconds

 

Internal Data Storage: 2 GB

 

Pump

• Independent pump (each IntelliDoX module)
• Flow Rate: 350 ml/min

 

Instrument Management System: Fleet Manager II, v 4.0 or higher

Ratings

• Device complies with FCC Part 15 and ICES-003
• Canadian EMI requirements. Operation is subject to the following two conditions: (1) Device may not cause harmful interference, (2)  Must accept any interference received (includes interference which may cause undesired operation).

 

Warranty: Full two-year warranty

Accessories and Options

Portable Kit – IntelliDoX fully portable station with Pelican case. Kit contains: 2 docking modules, AC power supply, ethernet cable, tubing, demand flow regulator, and more.

Multi-Inlet Key

Configure one IntelliDoX module to connect multiple calibration gas

Complete list of kits and accessories is available.

DUE TO ONGOING RESEARCH & PRODUCT IMPROVEMENT, SPECS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Part Number: DX-CLIP

BWC2-H BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High - 15 ppm by BW Technologies

Are you looking for a cost effective and reliable H2S detector to keep workers safe and compliant? The BW Clip BWC2-H is one of the easiest to operate and most dependable portable gas detectors on the market today. In fact, it is designed to deliver maintenance free operation for an entire two years. It is simple to use and there is no need to calibrate. It never needs new batteries or battery charging, and the sensor never needs replacing. It provides a low level alarm at 10 ppm and high level at 15 ppm.

If you are not going to use the BW Clip for a week or longer, just place it inside its special hibernation case. This will extend its life by that amount of time.

MicroDock II and Fleet Manager II compatible and the BW Clip BWC2-H will fit right in with your IntelliDoX instrument management system, and you'll enjoy a host of benefits from BW clip units with IntelliDoX technology, such as:

• Testing for 5 units at one time
• Extremely fast bump tests (fastest in the industry)
• Parameter and alarm set point adjustment
• Email notices and easy recordkeeping

BW Clip includes:

• Self test function thanks to Reflex Technology™ your gas sensor will test itself every day to ensure safety, instill worker confidence, and limit downtime.
• Dual reservoir design with Surecell™ technology, you have much faster response time and performance than standard electromechanical sensors. In addition, you'll receive excellent performance in the harshest of work environments.

Standard features includes:

• Lightweight and compact
• Maintenance free (one push button) operation
• 3 function alarm flashes, vibrates and loud 95 decibel sound
• Self testing battery, electronics, and sensor
• Low operating costs
• Rated for extreme temperatures and environments
• Logs last 35 H2S events and bump tests

Configuration Options:

• Flashing red noncompliance indicator - enable bump test due or gas event
• Set both low and high alarm set points prior to activation
• Gas reading can be given with alarm
• Bump test reminder can be set by user
• Display can include the current time of day

Part Number: BWC2H

BWC3R-M2050 BW Clip RT 3 Year Single Gas Detector, Carbon Monoxide (CO), (Low 20 ppm / High 50 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3R-M2050

BWC2R-M BW Clip RT 2 Year Single Gas Detector, Carbon Monoxide (CO), (Low 35 ppm / High 200 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-M

BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm, Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-M-B

BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 1.6 ppm / High - 3.2 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-H1632

BWC2R-H1.65 BW Clip RT 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), (Low 1.6 ppm / High 5 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-H1.65

BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High - 10 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-H10

BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 7 ppm / High - 7 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-H7

BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 5 ppm / High - 10 ppm, Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-H510-B

BWC3R-M30200 BW Clip RT 3 Year Single Gas Detector, Carbon Monoxide (CO), (Low 30 ppm / High 200 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3R-M30200

BWC2R-H7 BW Clip RT 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), (Low 7 ppm / High 7 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-H7

Custom gas detection that performs well in all environments

 

The IntelliDoX smart docking system is designed to compliment your Fleet Manager II program. In fact, it enhances the fleet managing process, making it more reliable, productive, and efficient.

Take instrument management to the next level

IntelliDox lets you manage up to five gas detectors at once. Set up and installation are fast (less than 2 minutes). You'll save time and trouble with tasks like bump tests and calibrating. Because each module contains its own pump, screen, and operating system, you can multi-task with your fleet. In fact, it's possible to calibrate and bump test at the same time.

Flexibility combined with convenience

Keep your detectors working to your specs and needs. It's easy to change alarm settings whenever you want to. Many other parameters are simple and easy to set.

Fast and simple record-keeping and data backup

Do you need to transfer gas detection info to your data backup system or to a computer? You can use Ethernet or any USB device.

• Track worker compliance and change alarm settings
• Expand your fleet management to as many as 5 modules
• Simple and efficient setup - saves time and headaches
• Customized maintenance-free detection made easy

 

Compatible Detectors

BW Clip Series
ConneX1
GasAlertMicroClip Series

Bump Testing with Greater Efficiency

FastBump is one of the most efficient ways to bump test your detectors. It lets you enjoy all the standard bump test features and use test gas in the most efficient manner, optimizing the entire process while saving gas.

IntelliDoX Features:

• Simplified record keeping, calibration, configuration, bump testing. Update settings for these functions: Calibration Reminders & Bump test scheduling; Alarm settings; Preferences for time display; Can show gas reading with Alarm; Transfer event log data; Enable or disable non-compliance Indicator; Update detector firmware; Detect hibernation
• Industry's leading FastBump testing - no more bottlenecks and you avoid wasting expensive purge gas
• Dock as many as five modules together, each unit has LCD screen and keypad for independent operation
• You don't have to connect to the network for retrieving data or module configuration - just use the USB port
• Ethernet port allows for fast network connection
• Simple "no tools required" setup
• Bump tests and span calibration are easy

 

IntelliDoX Docking System Specs

Size (w x h x d): 5.4" x 14.2" x 4.3" (13.8 cm x 36.2 cm 10.9 cm) (one docking module)
Weight: 4.2 pounds (1.91 kg)
Power supply: 12 V / 8.33A ITE
Real-time clock: Time and date stamp
Communications method: Detector unit and module can communicate back and forth via infrared 2-way system

External interface

• 1 Ethernet port
• 1 USB port

 

Menu navigation

• Adjust display settings
• Review IntelliDoX module
• Password protect (if desired)
• Configuration for gas inlets
• Adjust time & date
• Configure UI display language: English, Portuguese, French, German, and Spanish

 

Automatic tests

• FastBump: 10 seconds
• Standard bump: 40 seconds

 

Data Storage: 2 GB (internal storage capacity)

Pump

• Each IntelliDoX module comes with its own pump
• Flow Rate = 350 ml/min

 

Instrument Management System: version 4.0 or newer Fleet Manager II

Ratings: Each IntelliDox Docking module complies with the FCC Part 15 and ICES 003Canadian EMI requirements. Operation is subject to these 2 conditions: (1) Must not cause harmful interference, and (2) This device must accept any interference including that which may cause undesired operation.

Warranty: Full 24 month (2-year warranty)

Options and Accessories

Fully portable IntelliDoX test station (in a Pelican case). Every kit contains -two docking modules, AC power adaptor, demand flow regulator, tubing, Ethernet cable and more.

Multi-Inlet Key

Lets you configure single IntelliDoX modules to connect multiple calibration gas

A list of all the accessories & kits is available.

DUE TO ONGOING PRODUCT IMPROVEMENT AND RESEARCH, SPECS CAN CHANGE WITHOUT NOTICE.

Part Number: DX-SOLO

BWC2R-M-B BW Clip RT 2 Year Single Gas Detector, Carbon Monoxide (CO), (Low 35 ppm / High 200 ppm), Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-M-B

BWC2R-M2050 BW Clip RT 2 Year Single Gas Detector, Carbon Monoxide (CO), (Low 20 ppm / High 50 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-M2050

BW Clip 3 Year Single Gas Detector, Carbon Monoxide (CO), Low - 50 ppm / High - 100 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3-M50100

BW Clip 3 Year Single Gas Detector, Carbon Monoxide (CO), Low - 50 ppm / High - 200 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3-M50200

BWC3R-H-B BW Clip RT 3 Year Single Gas Detector, Hydrogen Sulfide (H2S), (Low 10 ppm / High 15 ppm), Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3R-H-B

BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 7 ppm / High - 10 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-H710