Gas Alert Micro Clip Xt

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

DOCK2-0-1C1P-00-G GasAlertMicroClip XT Docking Module (Charging with Power Supply) by BW Technologies

The BW Technologies GasAlertMicroClip XT Docking Module is an ideal and cost effective solution for bump tests and calibration. The lightweight and compact module easily fits on a desktop and includes a power supply for North American power outlets. This device is also an easy solution for maintaining compliance with safety standards and regulations. The unit operates with a 6V wall adaptor or 4 C-cell batteries. The device is compatible with the GasAlertMicroClip XT portable gas detection instrument.

Part Number: DOCK201C1P00G

DOCK2-0-1P-00-G GasAlertMicroClip XT Docking Module (Charging - No Power Supply) by BW Technologies

As a compatible accessory for the GasAlertMicroClip XT, BW Technologies manufactures the GasAlertMicroClip XT Docking Module. This compact desktop module is an easy and cost effective solution for bump tests and calibration. Simply drop the MicroClip into the docking station and monitor the LED lights for progress. The Docking Module is also capable of charging the GasAlertMicroClip XT. This particular product does not include a power supply.

Part Number: DOCK201P00G

DOCK2-2-1C1P-00-G MicroDock II Automatic Test and Calibration Station with GasAlertMicroClip XT Module (Charging) with Power Supply and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221C1P00G

DOCK2-2-1P-00-G MicroDock II Automatic Test and Calibration Station with GasAlertMicroClip XT Module (Charging) with No Power Supply and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221P00G

BW Technologies Short Strap

The BW Technologies Short Strap works to attach your portable gas detection instrument to your body or clothing. The durable and tough double loop design allows users to clip the device onto a number of buttons and fasteners. Used another way, the device can be tied to the strap and worn on your arm. This cost effective security solution improves the portability of the detector and helps to ensure that the detector may be placed effectively near the user's breathing zones.

Part Number: GALY1

Part Number: MCLCDK1

Part Number: MC2FPCB1

SR-M-MC Replacement MICROceL Carbon Monoxide (CO) Sensor

• GasAlertMicroClip
• GasAlertMicroClip XT
• GasAlertMicroClip XL
• GasAlertMax XT
• GasAlertMax XT II

Part Number: MCSCREWK1

BW Technologies Neck Strap with Safety Release

The durable and tough BW Technologies Neck Strap comes with an added safety feature. When on site, the neck strap works to maintain the hands free nature of your portable device. Simply slip the device onto the strip and wear near your mouth or nose. In the event that the neck strap becomes caught in other equipment or is dangerously constricted, the safety release breaks away from the strap. The strap is adjustable and made with a durable industrial strength black cord.

Part Number: GANS1

BW Technologies IR Connectivity Kit with Fleet Manager II Software

The BW Technologies IR Connectivity Kit connects your BW Technologies device to your computer. The kit also includes the Fleet Manager II Software. The software allows users to download data directly from their device to their computer. Downloading is quick and easy with the connectivity kit. From here, users can create and run a variety of reports that help with site assessments and analysis. The information can also be easily archived for future referencing.

Part Number: GAUSB1IR

SR-W-MP75C Replacement MICROpeL Combustible (LEL) Sensor

SR-H-MC Replacement MICROceL Hydrogen Sulfide (H2S) Sensor

Part Number: SRTOXMCDUM

Part Number: SRWMCDUM

BW Technologies Black Leather PVC Carrying Case

As part of its accessories offerings, BW Technologies manufactures a range of carrying cases and holsters. The BW Technologies Black Leather PVC Carrying Case is a durable and rugged protective case that is unobtrusive and does not interfere with the unit's operation. The black leather is ideal for gripping, and the front of the unit can easily be seen through the clear plastic cover. The cover allows for easy access to all of the device's buttons and allows for the LED lights on the unit to continue to be seen from every angle.

Part Number: MC2LC1

BW Technologies Extension Strap

The BW Technologies Extension Strap easily clips to your gas detection equipment to give it greater mobility. The strap extends up to 4 feet. The durable plastic clip easily attaches to the gas detection instrument, and the tough nylon strap is outfitted with a wide comfort strip for easy carrying. The hardware on the strap is made of a tough plastic bend that can withstand workplace abuse and lifting.

Part Number: GAES1

Part Number: GAPA1MC5NA

BW Technologies Chest Harness

BW Technologies has a wide range of accessories designed to improve the usability of their product lines. The BW Technologies Chest Harness does just that. Simply secure the harness to your body and insert the monitor into the harness. The monitor will fit securely in place on your chest and near your breathing zones. The chest harness is comfortable and tough enough to withstand modern work environments. With the chest harness, the device can continue to be hands free.

Part Number: GACH2

BW-CONNECT Honeywell BW Connect Wireless Adapter by BW Technologies

With the new Honeywell BW™ Connect you can transform your dependable BW gas detectors into wireless devices in the blink of an eye - this adapter can be attached quickly to your current detectors and paired with any available smartphone via Bluetooth®.

An easy-to-use cost-effective addition compatible with the Honeywell Safety Communicator App, Honeywell BW™ Connect grants real-time visibility of your workers' safety status and location so you have confidence that you can maintain complete situational awareness and full compliance.

Affordable

With the Honeywell BW™ Connect, customers can get wireless gas detection - without buying a wireless detector at a fraction of the cost. The BW Connect works with existing smartphones by downloading the Honeywell Safety Communicator App.

Compatible

Honeywell BW™ Connect is compatible with the following multi-gas detectors:

• Honeywell BW™ MicroClip XL
• Honeywell BW™ MicroClip X3
• Honeywell BW™ Max XT II

Reliable and Compliant

Honeywell is giving compliance-focused customers an easy, affordable way to bring connectivity to their existing fleet of reliable BW multi-gas detectors. With the BW Connect, workers have real time situational awareness with real time visibility on gas detectors to proactively ensure safety, compliance and productivity.

• Monitor gas detector readings from anywhere with real-time monitoring software
• More accurate decisions knowing the location of the worker
• Alarm notifications
• Compliance level, notification of bump and calibration level provided through software

Features & Benefits

• 1-year runtime (non-replaceable battery) disposable IRDA to BLE adapter which allows existing BW instruments to become IoT-enabled devices and instantly kick start the Connected Worker ecosystem.
• Global intrinsic safety and wireless certifications

Part Number: BW-CONNECT

BW Technologies 12-24 VDC Direct-Wire Power Adaptor

BW Technologies produces a multitude of accessories and replacement parts to improve the functionality and lifespan of their devices. BW Technologies also recognizes that various worksites have differing needs with respects to many aspects of equipment usage. To meet those needs, BW Technologies offers a variety of power options for their equipment. The BW Technologies 12-24 VDC Direct-Wire Power Adaptor can charge a gas detector by connecting directly to a 12V or 24V power system. Simply plug and charge.

Part Number: GAPA3

BW Technologies Vehicle Power Adaptor

BW Technologies produces a variety of on the go accessories for their product lines. The BW Technologies Vehicle Power Adaptor allows users to charge their detectors easily in any vehicle. The vehicle power adapter is easy to use and convenient. Simply plug the adapter into the device, and then plug the other end into the vehicle power port. The adapter has an LED light that will indicate when the detector is fully charged. The power adaptor is suitable for 12V applications.

Part Number: GAVPA1

BW Technologies Dummy Sensor for 3-Pin O2 or 3-Pin Twin Tox Locations

The BW Technologies Dummy Sensor for 3-Pin O2 or 3-Pin Twin Tox Locations is a dummy sensor that acts as a placeholder for the device. This dummy sensor does not detect gases and does not initiate the alarm sequence on the device. The sensor can be used for training and storage purposes. This cost effective dummy sensor fits several BW Technologies products.

Part Number: SRDUMM1