Gas Alert Micro Clip

Part Number: MCAF1

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

72-0007RK-02 Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

BW-CONNECT Honeywell BW Connect Wireless Adapter by BW Technologies

With the new Honeywell BW™ Connect you can transform your dependable BW gas detectors into wireless devices in the blink of an eye - this adapter can be attached quickly to your current detectors and paired with any available smartphone via Bluetooth®.

An easy-to-use cost-effective addition compatible with the Honeywell Safety Communicator App, Honeywell BW™ Connect grants real-time visibility of your workers' safety status and location so you have confidence that you can maintain complete situational awareness and full compliance.

Affordable

With the Honeywell BW™ Connect, customers can get wireless gas detection - without buying a wireless detector at a fraction of the cost. The BW Connect works with existing smartphones by downloading the Honeywell Safety Communicator App.

Compatible

Honeywell BW™ Connect is compatible with the following multi-gas detectors:

• Honeywell BW™ MicroClip XL
• Honeywell BW™ MicroClip X3
• Honeywell BW™ Max XT II

Reliable and Compliant

Honeywell is giving compliance-focused customers an easy, affordable way to bring connectivity to their existing fleet of reliable BW multi-gas detectors. With the BW Connect, workers have real time situational awareness with real time visibility on gas detectors to proactively ensure safety, compliance and productivity.

• Monitor gas detector readings from anywhere with real-time monitoring software
• More accurate decisions knowing the location of the worker
• Alarm notifications
• Compliance level, notification of bump and calibration level provided through software

Features & Benefits

• 1-year runtime (non-replaceable battery) disposable IRDA to BLE adapter which allows existing BW instruments to become IoT-enabled devices and instantly kick start the Connected Worker ecosystem.
• Global intrinsic safety and wireless certifications

Part Number: BW-CONNECT

BW Technologies Replacement Oxygen (O2) Sensor

The BW Technologies Replacement Oxygen Sensor is a highly effective replacement accessory. It has a sensor range of 0 to 30% with a 0.1% resolution. The replacement sensor is operational in a temperature range of -4 to 122 degrees Fahrenheit. It is compatible with some of the BW Technologies devices. BW Technologies replacement sensors are reliable and dependable and backed by solid performance. To ensure optimal compatibility, please consult your product specification sheet. Note: The SR-X2V is a direct replacement for the SR-X10 and SR-X10-C1 sensors. It can be used in any instrument that uses those sensors. If you are replacing your O2 sensor this is the best choice because it is an upgraded and more reliable design.

73-0040RK-01 Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

73-0040RK-02 Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

72-0007RK Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

72-0007RK-01 Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

Part Number: DXENBLNA

BW Technologies Auxiliary Filter Kit (Complete with Filter Adaptor and 5 Filters)

To ensure proper maintenance and operation of BW Technologies gas detection device, users will need to perform regular inspections and maintenance. Depending on the frequency of use, filters and screens may need to be replaced. A filter replacement kit is ideal to have on hand so that after inspection, a user can immediately replace the filters if needed. Clean filters help to protect the device and its internal circuitry from dust, debris, and moisture. This particular kit includes a filter adaptor and 5 filters. A clean filter is critical to extending the life of any gas detection instrument.

Part Number: MCAFK1

Part Number: MCXLBC1

73-0041RK-03 Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

MCX3-XU00-Y-BR GasAlertMicroClip X3 2-Gas Detector, Combustible (% LEL, Unfiltered), Oxygen (O2) - Yellow Housing, BR version (Brazil) by BW Technologies

With that combination of benefits, it's no wonder the GasAlertMicroClip is the world's most popular multi-gas detector, serving as your trusted companion in hazardous environments - keeping you safe without weighing you down.

Plus, it's the first multi-gas detector with a rating of IP68 for unmatched water protection. So you can be confident it will stand up to challenging conditions.

Choose from two detectors, both with extended 18-hour battery runtime, one-button operation and Honeywell's rigorous approach to quality:

GasAlertMicroClip XL: low up-front cost with a two-year warranty.

GasAlertMicroClip X3: three-year warranty and a new oxygen sensor that extends overall operational life expectancy.

Use our unique advanced technology for safety, compliance and productivity.

• Advanced engineering for reliable battery performance
• Reflex Technology™ automated self-test function routinely checks the operating condition of the sensors to increase safety, up-time, and overall worker confidence
• Compact, lightweight and easy to use - no expertise required
• Flashing green IntelliFlash™ light for compliance at a glance

GasAlertMicroClip Standard Features:

• Guaranteed runtime for at least a 12-hour shift - down to -20°C - without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery - tested to last in extreme environments
• Ergonomic and wearable - doesn't weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars
• IP68 rating ensures maximum protection against dust and water
• User-friendly, tamper-proof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
• Compatible with MicroDock II docking station for automated bump tests and calibration
• Compatible with Fleet Manager II software for reporting and fleet management
• Multi-language support in English, French, German, Spanish and Portuguese

New to GasAlertMicroClip X3:

• Five-year life expectancy - plus a three-year warranty
• An all-new oxygen sensor that operates consistently for five years - with no replacement costs for the life of the detector
• Superior cost of ownership - with minimized maintenance and maximized uptime

Part Number: MCX3-XU00-Y-BR

Gas Alert Micro Clip XT by BW Technologies

• Affordable four gas detection CO, H2S, O2, LEL. Alerts workers to the hazards of Hydrogen Sulfide, Carbon Monoxide, Combustible Gases, and Oxygen deficiencies and enrichments

• Low cost
• Small and Lightweight (4.4 x 2.4 x 1.1 inches and weighs only 6 0unces)
• Fast recharging time (less than 4 hours)
• All the necessary alarms for confined space work including Low alarm, high alarm, STEL, TWA
• Intelliflash feature to alert user to proper functioning
• Long 10 hour runtime on a single battery charge
• Can be used with the Sampler Pack for remote sampling of confined spaces
• Unit Auto Zero's on startup
• Easy calibration - each calibration lasts for 180 days
• Includes charger

Easy to use gas detector

Small and Lightweight

How is this version different from the original Gas Alert Micro Clip?

Does this monitor satisfy all of the OSHA requirements for Gas detection in a confined space?

Easy to change sensors

Accessories

Part Number: MC2XWHMBNA

GasAlertMicroClip X3 2-Gas Detector, O2/CO, Yellow, North America by BW Technologies

With that combination of benefits, it's no wonder the GasAlertMicroClip is the world's most popular multi-gas detector, serving as your trusted companion in hazardous environments - keeping you safe without weighing you down.

Plus, it's the first multi-gas detector with a rating of IP68 for unmatched water protection. So you can be confident it will stand up to challenging conditions.

Choose from two detectors, both with extended 18-hour battery runtime, one-button operation and Honeywell's rigorous approach to quality:

GasAlertMicroClip XL: low up-front cost with a two-year warranty.

GasAlertMicroClip X3: three-year warranty and a new oxygen sensor that extends overall operational life expectancy.

Use our unique advanced technology for safety, compliance and productivity.

• Advanced engineering for reliable battery performance
• Reflex Technology™ automated self-test function routinely checks the operating condition of the sensors to increase safety, up-time, and overall worker confidence
• Compact, lightweight and easy to use - no expertise required
• Flashing green IntelliFlash™ light for compliance at a glance

GasAlertMicroClip Standard Features:

• Guaranteed runtime for at least a 12-hour shift - down to -20°C - without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery - tested to last in extreme environments
• Ergonomic and wearable - doesn't weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars
• IP68 rating ensures maximum protection against dust and water
• User-friendly, tamper-proof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
• Compatible with MicroDock II docking station for automated bump tests and calibration
• Compatible with Fleet Manager II software for reporting and fleet management
• Multi-language support in English, French, German, Spanish and Portuguese

New to GasAlertMicroClip X3:

• Five-year life expectancy - plus a three-year warranty
• An all-new oxygen sensor that operates consistently for five years - with no replacement costs for the life of the detector
• Superior cost of ownership - with minimized maintenance and maximized uptime

Part Number: MCX3-X00M-Y-NA

73-0041RK-02 Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

SR-H-MC Replacement MICROceL Hydrogen Sulfide (H2S) Sensor

Gas Alert Micro Clip XL Multi-Gas Monitor by BW Technologies

• Multi-Gas Monitor that can detect up to 4 of the most common confined space gases: CO, H2S, O2, LEL

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Do you need a simple to use, low cost, waterproof instrument for entering confined spaces? Then the Gas Alert Micro Clip XL is the perfect match.

Is it simple enough for me to use?

Water Proof

Rugged and Durable

Construction sites, oil refineries, energy plants, waste water treatment plants, military, and just about any other harsh work environment, the Gas Alert Micro Clip XL can take it.

No Experience Necessary

That s it. The loud 95 decibel alarm is loud enough to hear in most work environments, but if it s not then there are two other alarms to also alert you.

The vibrating alarm works just like the vibrating alert on your phone which you will feel if you have the Gas Alert Micro Clip XL attached to your body using the built-in alligator clip. It also has bright red LED s that can t be missed and can be seen from a far distance.

Calibration

If you still prefer not to perform the calibration yourself, or need a factory certified NIST traceable calibration certificate, then simply send it in to our service center for lightning fast turn-around time.

Either way calibration is simple.

How big is it?

If you are used to carrying a smartphone then you will barely even notice the Gas Alert Micro Clip XL.

Is it right for my job?

But don't just take our word for it. We're confident that the Gas Alert Micro Clip XL will be the best confined space gas monitor that you've ever used! If you don't agree just return it within 30 days for a full money back guarantee.

MCX3-XU00-Y-AU GasAlertMicroClip X3 2-Gas Detector, Combustible (% LEL, Unfiltered), Oxygen (O2) - Yellow Housing, AU version (Australia) by BW Technologies

With that combination of benefits, it's no wonder the GasAlertMicroClip is the world's most popular multi-gas detector, serving as your trusted companion in hazardous environments - keeping you safe without weighing you down.

Plus, it's the first multi-gas detector with a rating of IP68 for unmatched water protection. So you can be confident it will stand up to challenging conditions.

Choose from two detectors, both with extended 18-hour battery runtime, one-button operation and Honeywell's rigorous approach to quality:

GasAlertMicroClip XL: low up-front cost with a two-year warranty.

GasAlertMicroClip X3: three-year warranty and a new oxygen sensor that extends overall operational life expectancy.

Use our unique advanced technology for safety, compliance and productivity.

• Advanced engineering for reliable battery performance
• Reflex Technology™ automated self-test function routinely checks the operating condition of the sensors to increase safety, up-time, and overall worker confidence
• Compact, lightweight and easy to use - no expertise required
• Flashing green IntelliFlash™ light for compliance at a glance

GasAlertMicroClip Standard Features:

• Guaranteed runtime for at least a 12-hour shift - down to -20°C - without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery - tested to last in extreme environments
• Ergonomic and wearable - doesn't weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars
• IP68 rating ensures maximum protection against dust and water
• User-friendly, tamper-proof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
• Compatible with MicroDock II docking station for automated bump tests and calibration
• Compatible with Fleet Manager II software for reporting and fleet management
• Multi-language support in English, French, German, Spanish and Portuguese

New to GasAlertMicroClip X3:

• Five-year life expectancy - plus a three-year warranty
• An all-new oxygen sensor that operates consistently for five years - with no replacement costs for the life of the detector
• Superior cost of ownership - with minimized maintenance and maximized uptime

Part Number: MCX3-XU00-Y-AU

Part Number: SRWMCDUM

BW Technologies Manual Aspirator Pump Kit with Probe (1 foot or .3 meters)

The BW Technologies Manual Aspirator Pump Kit with Probe is approximately 1 foot in length (or .3 meters). The durable and tough plastic hose ensures that there is no leakage and protects the accuracy of the device's measurements. The unit features a manual aspirator pump complete with an easy grip rubber bulb. The bulb and aspirator are manufactured with the highest safety standards and are sealed to prevent inaccuracy caused by leakage.

Part Number: MCAS01