Flue Analyzer

716 Flue Gas Analyzer by Test Products International

The TPI Model 716 Flue Gas Analyzer is a state of the art, easy to use analyzer designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

• Built-in differential manometer with 0.001 H2O resolution
• Calculates combustion efficiency
• Data Logging with time and date stamp
• Will not shut off if 15 ppm CO is present for increased safety
• Communicate to a PC via the USB interface
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Push on fittings for fast and easy use
• Optional Bluetooth interface

Applications

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Temperature checking, including superheat and hydronic differential temperatures
• Dual input differential manometer with 3 selectable units of measure: kPa, mBar, inH20

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selectionduring start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

The TPI 716 Flue Gas Analyzer comes complete with the following standard accessories:

• TPI 716 Analyzer
• Combustible Gase Leak Probe (A806)
• Rubber Boot (A765) 1 each installed on analyzer
• Soft Carrying Case (A768) - 1 each
• Flue Sampling Probe (A770) - 1 each
• In-Line Filter / Water Trap installed on Flue probe (A795) - 1 each
• Disc water filter installed in water trap (A794W) - 1 each
• Spare In-Line Filter - 1 each (A794F is a package of 5 filters)
• Temperature Probe (GK11M) - 1 each
• Battery Charger (A766) - 1 each
• Mini Pump Protection Filter Assembly (A763) - 1 each
• Exhaust Spigot Removable (A764) - 1 each
• Pressure Tubing (A774) - 1 each 6 piece
• Static Pressure Tips (A776) - 2 each
• 1/4" barbed to 1/8" NPT fitting (A603) - 2 each
• Gas Valve Adapter (A611) - 1 each
• Adapter Tubing (A791) - 1 each 4" piece
• Instruction Manual

The TPI 716 Flue Gas Analyzer has the following options available:

• A807 PC Software and cable for communication to a PC.
• A740 infrared printer (Included with 716A740)

716A740 716 Flue Gas Analyzer Kit by Test Products International

Features

• Built-in differential manometer with 0.001 H2O resolution
• Calculates combustion efficiency
• Data Logging with time and date stamp
• Will not shut off if 15 ppm CO is present for increased safety
• Communicate to a PC via the USB interface
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Push on fittings for fast and easy use
• Optional Bluetooth interface

A740 Features

• Easy to use
• Battery operated
• Self test facility
• Adjustable contrast
• Manual paper feed
• Maximum transmitting distance 16"(45cm)

Includes

• 716 Flue Gas Analyzer
• A740 IR Printer

0563 3104 01 310 II - Flue Gas Analyzer by Testo

The new testo 310 II flue gas analyzer combines simple functions with a high level of measurement accuracy, and is perfect for all basic measurements on heating systems. Long battery lifetimes of more than eight hours guarantee the analyzer is ready. Simultaneous, individual measurement and display of the measurement parameters in the instrument's high-resolution display are easily possible. The display can be easily configured via the testo Smart App and translates to the 310 II. Its easy handling and compact design make the testo 310 II a robust tool for daily work – even when things get rough.

The printer with Bluetooth® interface, specially developed for the testo 310 II, allows you to create clear reports on site as required. The current measurement value can be printed out of any measurement menu during or after the measurement. Via the simple connection to the testo Smart App, further measurements as well as digital documentation, data transfer and digital customer data management can be performed simultaneously. The testo 310 II offers all advantages of electronic flue gas measurement in high quality at a perfect cost-benefit ratio.

• Simultaneous, individual measurement and display of all relevant measurement parameters (O2, CO, CO2, flue gas and ambient temperature, CO environment, draft and pressure). Display configurable via the testo Smart App.
• Simultaneous, additional measurements via the testo Smart App (e.g. gas flow pressure, flow and return temperature)
• Easy and intuitive menu guidance
• Data documented and sent digitally via testo Smart App
• Digital customer data management via testo Smart App
• Rechargeable lithium battery for over 8 hours of operation
• Robust construction
• Sensor zeroing in 30 seconds

0563 3105 01 310 II - Flue Gas Analyzer with Printer by Testo

The new testo 310 II flue gas analyzer combines simple functions with a high level of measurement accuracy, and is perfect for all basic measurements on heating systems. Long battery lifetimes of more than eight hours guarantee the analyzer is ready. Simultaneous, individual measurement and display of the measurement parameters in the instrument's high-resolution display are easily possible. The display can be easily configured via the testo Smart App and translates to the 310 II. Its easy handling and compact design make the testo 310 II a robust tool for daily work – even when things get rough.

The printer with Bluetooth® interface, specially developed for the testo 310 II, allows you to create clear reports on site as required. The current measurement value can be printed out of any measurement menu during or after the measurement. Via the simple connection to the testo Smart App, further measurements as well as digital documentation, data transfer and digital customer data management can be performed simultaneously. The testo 310 II offers all advantages of electronic flue gas measurement in high quality at a perfect cost-benefit ratio.

• Simultaneous, individual measurement and display of all relevant measurement parameters (O2, CO, CO2, flue gas and ambient temperature, CO environment, draft and pressure). Display configurable via the testo Smart App.
• Simultaneous, additional measurements via the testo Smart App (e.g. gas flow pressure, flow and return temperature)
• Easy and intuitive menu guidance
• Data documented and sent digitally via testo Smart App
• Digital customer data management via testo Smart App
• Rechargeable lithium battery for over 8 hours of operation
• Robust construction
• Sensor zeroing in 30 seconds

E Instruments E5500 Portable Industrial Flue Gas and Emissions Analyzer

The E5500 Portable Industrial Flue Gas and Emissions Analyzer utilizes state of the art technology to monitor, measure, and analyze atmospheric conditions. The unit can operate with up to 5 sensors (O2, CO2, CO, NO, NO2, NOx, SO2, Flue Gas and Air Temperature, Draft and Differential Pressure, and Stack Gas Velocity). Each sensor has various ranges, resolutions, and accuracies. The analyzer is designed for use in a variety of situations with potentially combustible environments.

E5500 Features

The water trap feature efficiently removes excess water vapor from the flue gas sample to prevent combustible gases from bubbling from the gas phase into the condensate. The water trap feature also includes a mounting piece to help maintain proper vertical positioning. The extensive internal memory is a key feature of the analyzer. The internal memory can store up to 1000 test and may be configured for longer term data storage. The 5500 analyzer comes standard with factory calibration, and with span gas cylinders, the analyzer can be easily recalibrated. To maintain accuracy, it is recommended that users recalibrate the analyzer at least once every year.

State of the Art Technology

The analyzer uses state of the art technology and software to provide users with a way to analyze and store data. The data can provide both real time assessments and historical trends. The standard EGAS software package that is included with the E5500 can save and graph real time data while in the field via laptop or in a laboratory through a personal computer. The device uses Bluetooth wireless communications to transfer data to an external computer. The Bluetooth module also comes with the standard software package. Users can also export the analyzer s data to a variety of programs for further assessment and analysis.

The 5500 analyzer has an optional wireless remote printer. The thermal printer is convenient and simple. Users can print real time information while in the field or store the data for later use.

Equipment Inclusions

The E5500 models includes an external water trap with mounting piece, a battery charge, a rechargeable battery pack, stack gas and air temperature measurements, draft and differential measurements, internal memory, software package with Bluetooth module, a USB cable, protective carrying case, wireless communication, calibration certificate, operator s manual, and calculated values for efficiency, excess air, and CO2 percentage.

E Instruments International

E Instruments international is a multinational company dedicated to providing the very best air quality monitoring equipment. The company s research and development team places a great emphasis on customer demands and statutory requirements. By purchasing an E Instruments International product, consumers can feel confident that their product has been designed to meet their needs in the field while placing an emphasis on safety and security.

708 Combustion Efficiency Analyzer with Flue Probe by Test Products International

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO₂ (nitrogen dioxide) and NOX (combination of NO and NO₂) to prevent cross sensitivity errors.

Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O₂, and stack temperature.

Determine combustion efficiency, CO₂, and CO air free. Some models include built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selectionduring start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• Measure CO, and temperature
• Calculate CO2, efficiency, excess air, and CO air free
• Pump driven for fast response
• Will not shut off if 15 ppm CO is present for increased safety
• Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Store function to save up to 50 readings
• Large easy to read backlit display

Applications

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Temperature checking, including superheat and hydronic differential temperatures

E Instruments E8500 Portable Industrial Flue Gas and Emissions Analyzer

The E8500 Portable Industrial Flue Gas and Emissions Analyzer is the latest in gas detection equipment with Bluetooth technology. Utilizing up to 9 different gas sensors, the technologically advanced detector is designed to fit almost any industrial application. The unit is designed to monitor an array of combustible gases while recording real time data and storing the information for future analysis. The state of the art software package that is included is easy to install and use. Thanks to the thoughtful design and advanced internal technology, the E8500 is one of the most reliable and useful gas analyzers on the market.

State of the Art Technology

The E8500 comes standard with an EGAS software package. The package saves and graphs data in real time. Data can be analyzed both in the field and in a laboratory. The gas analyzer uses Bluetooth technology to communicate data between the unit and a computer. The Bluetooth module is also included with the EGAS software package. Users can also export this data to various programs for more specialized reports.

Another useful application of advanced technology is evident in the LCD display screen. The screen has a continuous backlight and is automatically rotated. The parameters in the display can be zoomed in or out based on user controls.

Exclusive Features

The E8500 Portable Gas and Emissions Analyzer is packed with exclusive features

• Built In Thermoelectric Chiller
• Automatic Condensate Drain Pump
• Wireless Remote Printer
• CO Dilution Auto Range
• True NOx Measurements
• Up to 9 Total Gas Sensors (O2, CO2, CO, NO, NO2, NOx, SO2, H2S, CxHy, Flue Gas and Air Temperature, Draft and Differential Pressure, and Stack Gas Velocity)
• NDIR Sensors
• Gas Velocity with Pitot Tube
• Rechargeable Battery
• Internal Memory
• Wireless Communications Capabilities
• PC Software with Bluetooth technology

Thermoelectric Chiller with Auto Condensate Drain

To help protect the integrity and life of the analyzer, developers implemented several safety devices. One of which is the thermoelectric chiller with an auto condensate drain. The internal thermoelectric chiller recognizes and removes water and water vapor from the flue gas sample. This prevents combustion gases from bubbling from the gas phase into the condensate. The built-in condensate drain pump automatically pumps the accumulated water out through the bottom of the unit. These automatic features are convenient and necessary for preserving the integrity of the machine.

The E8500 can utilize up to 9 sensors. This entails up to 6 electrochemical sensors and up to 3 NDIR sensors. Each sensor has its own range, resolution, and accuracy rating. Flue gas and air temperature measurements are standard features while the differential temperature is used as part of the efficiency calculation. The unit has two pressure inputs for measuring differential pressure. The E8500 comes standard with a complete factory calibration. With span gas cylinders, the unit can be easily recalibrated. E Instruments International recommends recalibration at least once every year to ensure equipment accuracy.

E Instruments E5500-N Portable Industrial Flue Gas & Emissions Analyzer, O2 (0-25%), CO (0-8000ppm), NO/NOx (0-4000ppm), & NO2 (0-1000ppm)

The E5500 Portable Industrial Flue Gas and Emissions Analyzer utilizes state of the art technology to monitor, measure, and analyze atmospheric conditions. The unit can operate with up to 5 sensors (O2, CO2, CO, NO, NO2, NOx, SO2, Flue Gas and Air Temperature, Draft and Differential Pressure, and Stack Gas Velocity). Each sensor has various ranges, resolutions, and accuracies. The analyzer is designed for use in a variety of situations with potentially combustible environments.

E5500 Features

The water trap feature efficiently removes excess water vapor from the flue gas sample to prevent combustible gases from bubbling from the gas phase into the condensate. The water trap feature also includes a mounting piece to help maintain proper vertical positioning. The extensive internal memory is a key feature of the analyzer. The internal memory can store up to 1000 test and may be configured for longer term data storage. The 5500 analyzer comes standard with factory calibration, and with span gas cylinders, the analyzer can be easily recalibrated. To maintain accuracy, it is recommended that users recalibrate the analyzer at least once every year.

State of the Art Technology

The analyzer uses state of the art technology and software to provide users with a way to analyze and store data. The data can provide both real time assessments and historical trends. The standard EGAS software package that is included with the E5500 can save and graph real time data while in the field via laptop or in a laboratory through a personal computer. The device uses Bluetooth wireless communications to transfer data to an external computer. The Bluetooth module also comes with the standard software package. Users can also export the analyzer s data to a variety of programs for further assessment and analysis.

The 5500 analyzer has an optional wireless remote printer. The thermal printer is convenient and simple. Users can print real time information while in the field or store the data for later use.

Equipment Inclusions

The E5500 models includes an external water trap with mounting piece, a battery charge, a rechargeable battery pack, stack gas and air temperature measurements, draft and differential measurements, internal memory, software package with Bluetooth module, a USB cable, protective carrying case, wireless communication, calibration certificate, operator s manual, and calculated values for efficiency, excess air, and CO2 percentage.

E Instruments International

E Instruments international is a multinational company dedicated to providing the very best air quality monitoring equipment. The company s research and development team places a great emphasis on customer demands and statutory requirements. By purchasing an E Instruments International product, consumers can feel confident that their product has been designed to meet their needs in the field while placing an emphasis on safety and security.

E Instruments E5500-S Portable Industrial Flue Gas & Emissions Analyzer, O2 (0-25%), CO (0-8000ppm), NO/NOx (0-4000ppm), & SO2 (0-4000ppm)

The E5500 Portable Industrial Flue Gas and Emissions Analyzer utilizes state of the art technology to monitor, measure, and analyze atmospheric conditions. The unit can operate with up to 5 sensors (O2, CO2, CO, NO, NO2, NOx, SO2, Flue Gas and Air Temperature, Draft and Differential Pressure, and Stack Gas Velocity). Each sensor has various ranges, resolutions, and accuracies. The analyzer is designed for use in a variety of situations with potentially combustible environments.

E5500 Features

The water trap feature efficiently removes excess water vapor from the flue gas sample to prevent combustible gases from bubbling from the gas phase into the condensate. The water trap feature also includes a mounting piece to help maintain proper vertical positioning. The extensive internal memory is a key feature of the analyzer. The internal memory can store up to 1000 test and may be configured for longer term data storage. The 5500 analyzer comes standard with factory calibration, and with span gas cylinders, the analyzer can be easily recalibrated. To maintain accuracy, it is recommended that users recalibrate the analyzer at least once every year.

State of the Art Technology

The analyzer uses state of the art technology and software to provide users with a way to analyze and store data. The data can provide both real time assessments and historical trends. The standard EGAS software package that is included with the E5500 can save and graph real time data while in the field via laptop or in a laboratory through a personal computer. The device uses Bluetooth wireless communications to transfer data to an external computer. The Bluetooth module also comes with the standard software package. Users can also export the analyzer s data to a variety of programs for further assessment and analysis.

The 5500 analyzer has an optional wireless remote printer. The thermal printer is convenient and simple. Users can print real time information while in the field or store the data for later use.

Equipment Inclusions

The E5500 models includes an external water trap with mounting piece, a battery charge, a rechargeable battery pack, stack gas and air temperature measurements, draft and differential measurements, internal memory, software package with Bluetooth module, a USB cable, protective carrying case, wireless communication, calibration certificate, operator s manual, and calculated values for efficiency, excess air, and CO2 percentage.

E Instruments International

E Instruments international is a multinational company dedicated to providing the very best air quality monitoring equipment. The company s research and development team places a great emphasis on customer demands and statutory requirements. By purchasing an E Instruments International product, consumers can feel confident that their product has been designed to meet their needs in the field while placing an emphasis on safety and security.

E Instruments E5500-5 Portable Industrial Flue Gas & Emissions Analyzer, O2 (0-25%), CO (0-8000ppm), NO/NOx (0-4000ppm), NO2 (0-1000ppm), & SO2 (0-4000ppm)

The E5500 Portable Industrial Flue Gas and Emissions Analyzer utilizes state of the art technology to monitor, measure, and analyze atmospheric conditions. The unit can operate with up to 5 sensors (O2, CO2, CO, NO, NO2, NOx, SO2, Flue Gas and Air Temperature, Draft and Differential Pressure, and Stack Gas Velocity). Each sensor has various ranges, resolutions, and accuracies. The analyzer is designed for use in a variety of situations with potentially combustible environments.

E5500 Features

The water trap feature efficiently removes excess water vapor from the flue gas sample to prevent combustible gases from bubbling from the gas phase into the condensate. The water trap feature also includes a mounting piece to help maintain proper vertical positioning. The extensive internal memory is a key feature of the analyzer. The internal memory can store up to 1000 test and may be configured for longer term data storage. The 5500 analyzer comes standard with factory calibration, and with span gas cylinders, the analyzer can be easily recalibrated. To maintain accuracy, it is recommended that users recalibrate the analyzer at least once every year.

State of the Art Technology

The analyzer uses state of the art technology and software to provide users with a way to analyze and store data. The data can provide both real time assessments and historical trends. The standard EGAS software package that is included with the E5500 can save and graph real time data while in the field via laptop or in a laboratory through a personal computer. The device uses Bluetooth wireless communications to transfer data to an external computer. The Bluetooth module also comes with the standard software package. Users can also export the analyzer s data to a variety of programs for further assessment and analysis.

The 5500 analyzer has an optional wireless remote printer. The thermal printer is convenient and simple. Users can print real time information while in the field or store the data for later use.

Equipment Inclusions

The E5500 models includes an external water trap with mounting piece, a battery charge, a rechargeable battery pack, stack gas and air temperature measurements, draft and differential measurements, internal memory, software package with Bluetooth module, a USB cable, protective carrying case, wireless communication, calibration certificate, operator s manual, and calculated values for efficiency, excess air, and CO2 percentage.

E Instruments International

E Instruments international is a multinational company dedicated to providing the very best air quality monitoring equipment. The company s research and development team places a great emphasis on customer demands and statutory requirements. By purchasing an E Instruments International product, consumers can feel confident that their product has been designed to meet their needs in the field while placing an emphasis on safety and security.

707 Carbon Monoxide Analyzer by Test Products International

Use the 707 to measure CO levels in the flue and test ambient CO levels in home and office spaces. Hand held and easy to use.

Test flue gasses at home or office spaces for the presence and location of CO leaks. With a protective rubber boot, the new 707 fits comfortably in your hand and operates with the push of a button.

The TPI 707 Carbon Monoxide Analyzer is a state of the art, easy to use analyzer designed to display carbon monoxide levels in and around appliances and work / living spaces. The instrument is ruggedly constructed and comes with a 3 Year unit and 2 Year sensor Guarantee.

The TPI 707 combustion analyzer uses a state of the art electrochemical sensor. This sensor technology provides the longest lasting, most accurate and reliable means for performing tests. The sensor in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 707 will remind you when calibration is due by flashing "CAL DUE Err" for three seconds at start up if the date of calibration is one year or older.

Electrochemical sensors by nature are always active. Therefore the time the analyzer is off and not being used must be taken into account when determining sensor life. The sensor in your analyzer is warranted for two years. This warranty does not cover a sensor damaged through misuse of the analyzer.

Features

• Clear and fast response with advance pump driven technology
• Peak Hold to capture peak CO reading
• Instrument recycles and will not shut off if 15ppm CO is present, increasing safety
• Store Button allows you to save up to eight readings and then print using the IR port and optional A740 printer
• 1 ppm sensitivity
• Measures up to 10,000ppm
• Push on fittings are fast and easy to use
• Large easy to read backlit display
• Advanced electrochemical sensor is field replaceable and calibrateable
• Protective rubber boot and soft carrying case with shoulder strap is included
• Pump driven
• Pump flow block indicator
• Auto zero

Applications

• Ambient CO safety checks
• Checking flue gasses at home or office spaces for the presence and location of carbon monoxide

TPI 707 Flue Gas Analyzer comes complete with the following standard accessories:

• TPI 707 Instrument
• Rubber Boot (A765)
• Soft Carrying Case (A787)
• Flue Sampling Probe (A69)
• In-Line Filter assembly installed on Flue probw (A794)
• Mini Pump Protection Filter Assembly and spare filters (A763)
• Exhaust Spigot (removable) (A764)
• Instruction Manual

TPI 707 Flue Gas Analyzer has the following options available:

• Infrared printer (A740)
• Spare In-Line Filter (A794F is a package of 5 filters)
• Spare Water Block Filter (A794W is a package of 1 filter).

706 High CO Analyzer by Test Products International

Measure up to 99,999 ppm with the TPI 706 tests forklift exhaust gases for the presence and location of carbon monoxide leaks. This instrument fits comfortably in your hand and operates with just the push of a button.

The 706 is an advanced state-of-the-art carbon monoxide (CO) gas analyzer designed to provide part per million readings from 0- 10,000 ppm. The 706 is capable of performing ambient as well as flue gas checks with its hot air probe and internal pump.

The 706 is utilizes an advanced long life electrochemical sensor that can be field calibrated and has a low replacement cost.

Features include IR printer port to print hard copy of data, 10 storage locations, Flow block indication, peak reading for test period as well as date and time.

Features

• Pump driven for fast response
• Store function to save up to 50 readings
• Will not shut off if 15 ppm CO is present for increased safety
• Push on fittings for fast and easy use
• Optional A740 IR printer available for hard copies of test results
• Large easy to read backlit display

Applications

• Check forklift exhaust gases for the presence and location of carbon monoxide

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• Range: 0 ~ 9,999ppm <10,000ppm: 1.000 ~ 9.999%
• 1 ppm sensitivity
• Pump driven
• Auto zero

0600 9770 Flue Gas Probe Flexible, 330 mm by Testo

In measurements on heating system burners, obstructed measurement areas can occur (e.g. due to sloping roofs, cramped basement rooms). In these cases, straight flue gas probes can only be inserted into the flue with great difficulty. With flexible flue gas probes made of metal, there is a danger that the probe shaft is over-bent, and can break.

Our flexible flue gas probe offers the ideal solution to this problem: The probe shaft is made of flexible plastic, and can thus be bent very easily without breaking. This allows you to carry out flue gas measurements without any problems, at any measurement site.

• For flue gas measurements on heating system burners
• With extremely flexible plastic probe shaft
• Used for measurements at difficult-to-access measurement sites
• Connectable to flue gas analyzer by bayonet fitting

Our flexible flue gas probe helps you to carry out flue gas measurements even on difficult-to-access measurement areas. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings)

Delivery Scope

Flexible flue gas probe, connectable to the flue gas analyzer by bayonet fitting.

712 Deluxe Combustion Efficiency Analyzer with Optional PC Interface by Test Products International

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO₂ (nitrogen dioxide) and NOX (combination of NO and NO₂) to prevent cross sensitivity errors.

Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O₂, and stack temperature.

Determine combustion efficiency, CO₂, and CO air free. Built-in differential manometer, combustible gas detection, PC communication, and data logging.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selectionduring start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• High resolution 0.001 in H20 differential manometer for high efficiency and oil equipment
• Measure CO, and temperature
• Calculate CO2, efficiency, excess air, and CO air free
• Pump driven for fast response
• Will not shut off if 15 ppm CO is present for increased safety
• Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Store function to save up to 50 readings
• Large easy to read backlit display
• Rechargeable Ni-MH Battery with > 6 Hours battery life
• Optional Bluetooth interface
• Checks combustibles in flue, optional PC interface

Applications

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Temperature checking, including superheat and hydronic differential temperatures
• Detecting gas leak in gas lines and around gas fueled appliances. Dual input differential manometer with 3 selectable units of measure: kPa, mBar,inH20

709 Combustion Efficiency Analyzer and Differential Manometer by Test Products International

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO₂ (nitrogen dioxide) and NOX (combination of NO and NO₂) to prevent cross sensitivity errors.

Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O₂, and stack temperature.

Determine combustion efficiency, CO₂, and CO air free. Built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selectionduring start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• High resolution 0.001 in H20 differential manometer for high efficiency and oil equipment
• Measure CO, and temperature
• Calculate CO2, efficiency, excess air, and CO air free
• Pump driven for fast response
• Will not shut off if 15 ppm CO is present for increased safety
• Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Store function to save up to 50 readings
• Large easy to read backlit display

Applications

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Temperature checking, including superheat and hydronic differential temperatures
• Dual input differential manometer

709R Combustion Efficiency Analyzer with Differential Manometer by Test Products International

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO₂ (nitrogen dioxide) and NOX (combination of NO and NO₂) to prevent cross sensitivity errors.

Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O₂, and stack temperature.

Determine combustion efficiency, CO₂, and CO air free. Built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need to perform fuel selection every time the analyzer is turned on.

• High resolution 0.001 in H20 differential manometer for high efficiency and oil equipment
• Measure CO, and temperature
• Calculate CO2, efficiency, excess air, and CO air free
• Pump driven for fast response
• Will not shut off if 15 ppm CO is present for increased safety
• Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Store function to save up to 50 readings
• Large easy to read backlit display
• Rechargeable Ni-MH Battery with > 6 Hours battery life

Applications

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Temperature checking, including superheat and hydronic differential temperatures
• Dual input differential manometer

0632 3170 317-1 Flue Leak Detector by Testo

The testo 317-1 flue gas spillage detector reliably detects escaping heating gases. The practical instrument immediately gives off a visual and audible alarm. It is therefore not necessary to actually see the detector. The bendable probe facilitates applications in confined areas.

• Reliable recognition of escaping flue gases
• Bendable measurement probe for points which are difficult to access
• Audible and visual alarm
• DVGW approved

0563 3100 310 Residential Analyzer Kit by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structurey. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement

0563 3100 01 310 Residential Analyzer Kit by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structurey. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement