Crowcon Triple Plus + Ir Portable Gas Detectors

TRP-03-NU-Z-IR Triple Plus + IR Portable 2-Gas Detector, IR CH4 % LEL, O2 Pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

TRU-03-NU-Z-IR Triple Plus + IR Portable 2-Gas Detector, IR CH4 % LEL, O2 Non-pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

TRP-01-NU-Z-IR Triple Plus + IR Portable 4-Gas Detector, IR CH4 % LEL, O2, H2S, CO Pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

TRP-02-NU-Z-IR Triple Plus + IR Portable 3-Gas Detector, IR CH4 % LEL, O2, H2S Pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

TRP-04-NU-Z-IR Triple Plus + IR Portable 2-Gas Detector, IR CH4 % LEL & % vol., O2 Pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

TRU-01-NU-Z-IR Triple Plus + IR Portable 4-Gas Detector, IR CH4 % LEL, O2, H2S, CO Non-pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

TRU-02-NU-Z-IR Triple Plus + IR Portable 3-Gas Detector, IR CH4 % LEL, O2, H2S Non-pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

TRU-04-NU-Z-IR Triple Plus + IR Portable 2-Gas Detector, IR CH4 % LEL & % vol., O2 Non-pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

Triple Plus+ IR Multigas Personal Monitor by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

TPP-0141 Triple Plus+ Portable Monitor, Non-pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

TPP-0142 Triple Plus+ Portable Monitor, Pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Triple Plus+ Multigas Personal Monitor by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

TP-BPZZZZZZ-A-001-A Triple Plus+ Portable 1-Gas Monitor - pumped, 0-100% LEL ethylene IR, UK ATEX by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

TP-AGCRZZZZ-A-001-B Triple Plus+ Portable 2-Gas Monitor, O2, H2 PPM, Non-pumped, Li ION Battery,UK ATEX by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

TP-AGZZZZZZ-A-001-B Triple Plus+ Portable 1-Gas Monitor, O2, Non-pumped, LiION Battery, UK ATEX by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

TP-AVZZZZZZ-A-001-A Triple Plus+ Portable 1-Gas Monitor, HF, Pumped, Li ION Battery,UK ATEX by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

TP-ZZZZZZCF-A-001-B Triple Plus+ Portable 1-Gas Monitor, HCL, Non-pumped, Li ION Battery, UK ATEX by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

TP-ZZZZZZCH-A-001-A Triple Plus+ Portable 1-Gas Monitor, VO, Pumped, Li ION Battery,UK ATEX by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

TRP-01-NU-Z/K Triple Plus+ Portable 4-Gas Monitor Kit, CH4 % LEL, O2, H2S, CO Pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Kit Includes:

• Triple Plus+ Portable 4-Gas Monitor, Pumped with the standard accessories
• Communications software
• Computer lead
• Charger/interface and carrying (brief) case with foam liner

TRP-02-NU-Z/K Triple Plus+ Portable 3-Gas Monitor Kit, CH4 % LEL, O2, H2S Pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Kit Includes:

• Triple Plus+ Portable 3-Gas Monitor, Pumped with the standard accessories
• Communications software
• Computer lead
• Charger/interface and carrying (brief) case with foam liner

TRP-03-NU-Z/K Triple Plus+ Portable 3-Gas Monitor Kit, CH4 % LEL, O2, CO Pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Kit Includes:

• Triple Plus+ Portable 3-Gas Monitor, Pumped with the standard accessories
• Communications software
• Computer lead
• Charger/interface and carrying (brief) case with foam liner

TRP-04-NU-Z/K Triple Plus+ Portable 2-Gas Monitor Kit, CH4 % LEL, O2 Pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Kit Includes:

• Triple Plus+ Portable 2-Gas Monitor, Pumped with the standard accessories
• Communications software
• Computer lead
• Charger/interface and carrying (brief) case with foam liner

TRU-01-NU-Z/K Triple Plus+ Portable 4-Gas Monitor Kit, CH4 % LEL, O2, H2S, CO Non-pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Kit Includes:

• Triple Plus+ Portable 4-Gas Monitor, Non-pumped with the standard accessories
• Communications software
• Computer lead
• Charger/interface and carrying (brief) case with foam liner

TRU-02-NU-Z/K Triple Plus+ Portable 3-Gas Monitor Kit, CH4 % LEL, O2, H2S Non-pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Kit Includes:

• Triple Plus+ Portable 3-Gas Monitor, Non-pumped with the standard accessories
• Communications software
• Computer lead
• Charger/interface and carrying (brief) case with foam liner