Bw Solo

BWS1-H2-B BW Solo Single-Gas Detector, (H2S ext range) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-H2-B

BWS1-H2-Y BW Solo Single-Gas Detector, (H2S ext range) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-H2-Y

State-of-the-art Portable Single-Gas Detection

Comfortable to Use

Small, compact, and lightweight, the Honeywell BW™ Solo is an easy detector to use in any type of environment, including hazardous locations.

Easy Maintenance and Service

In the field or on the go, the Honeywell BW™ Solo is designed to allow quick switching of sensors, sensor filters, or batteries. Just pop the door of the compartment open and make the necessary changes – no tools needed.

Sensor for Exotic and Standard Gases

Designed for use across diverse applications and industries, including power plants and petrochemical facilities, the Honeywell BW™ Solo is able to detect:

• Ammonia (NH₃)
• Carbon monoxide (CO)
• Oxygen (O₂)
• Nitrogen oxide (NO)
• Sulfur dioxide (SO₂)
• Ozone (O₃)
• Hydrogen (H2)
• Hydrogen sulfide (H₂S)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Chlorine dioxide (ClO₂)

Featuring The 1-Series Sensor for A New Level of Accuracy, Safety and Lower Costs for Single-Gas Detection

Designed for frequently monitored single-gas use, the 1-Series sensor provides fast, acute performance coupled with a long life, even when used in extreme environments.

When Speed is Critical – Fast CO, H₂S, and O₂ Response

Designed to be streamlined, the square sensor design and the lower height of the sensor makes it easier to work with and use in any space. At 1/3 the height of standard sensors, and with the unique square shape, fast responses and rapid gas diffusion is standard.

Best Warranty and Sensor Life

The 1-Series sensor offers a three-year warranty, and the sensor has a typical life cycle of up to five years, depending on the gas exposure. With increased uptime and lower costs of maintenance, this is an investment in your productivity and safety.

Developed by a Honeywell Company

City Technologies, a Honeywell company,developed the 1-Series sensor specifically for the Honeywell BW™ Solo. They are also the company that designed and manufactured the 40XV and the 40xLL long-life oxygen sensors used in our Honeywell BW detector. With 40 years of experience, these are reliable and proven sensors that are built with the highest quality control.

End Nuisance Alarms

Do your workers have to deal with nuisance alarms with existing sensors? The 1-Series sensor eliminates these nuisance alarms while increasing the accuracy of readings, helping to improve compliance. The sensors are designed to work in harsh environments, including temperatures between -40°C to 60°C with or without humidity and transient pressure factors.

Easy Sensor Replacement

Without the need to take the detector apart, or exposure the printed circuit board, switching out a sensor has never been easier. Just take out the existing sensor and replace it with the new one, no special tools or equipment necessary.

Fleet Management, Automation, and Data Centralization Features Save Time

The Honeywell BW™ Solo is designed to integrate with the IntelliDox and Honeywell SafetySuite Device Configurator software for data transfer and sensor control.

Docking with IntelliDox

The Honeywell IntelliDox is designed for easy docking and automatic transfer of data. In addition, the IntelliDox can also perform a range of different actions, including bump tests, bump reminders, adjust or set points, and firmware upgrades. The fleet management software automatically transfers peak readings, alarms, and other specified data when connected to USB or Ethernet.

Up to five IntelliDox can be grouped, or a single dock can be used in insolation. Each dock has a keypad, pump, LCD screen, and operator control. Grouped docks share calibration gas and power.

Boosting and Centralizing Compliance with Device Configurator

Serving several purposes, the ability to use the Device Configurator Windows-based software to export data from the detector to the computer allows for centralized management and configuration. This includes configuring alarm set points, updating firmware and exporting data from one centralized location.

Add the Cloud

Subscribing to the Honeywell HoneywellSafetySuite Device Manage allows your business to use cloud-based technology for compliance management, productivity, and safety. The advantages include:

• easy tracking and quick identification of compliance status and alarms with multiple detectors used across various sites
• Immediate and real-time text or email messages about alarms
• Reporting options
• Central data storage for easy access for reporting, audits or investigations
• Customized features to boost compliance

Control Through the App

The Device Configurator app allows for easy control of the detector once the Honeywell BW™ Solo is linked to your smartphone. This allows the phone app to configure, establish set alarm points, and manage actions from up to 6 meters away using BLE (Bluetooth Low Energy).

The app can be used to see readings, check calibration or bump data and details, and to have a record of past calibrations and results. The app can also consolidate data and mail a certificate to designated stakeholders, which can be verified at launch.

No Need for Docking Stations

The choice to use the app eliminates the need for the use ofIntelliDox docking stations. Instead, the Honeywell BW™ Solo uses BLE to transmit data to the desktop software. For fleet management, this is a cost-reduction option.

Remote Access from Anywhere

With the Safety Communicator app, data is immediately transferred to the monitoring software developed by Honeywell. This is a real-time transfer without the need for docking the detector, allowing for full access to all detector locations from any connected device, improving worker safety on any job.

Increase Compliance for Workers and Safety Managers

Gloves On? No Problem for Operation

Hazardous and difficult environments do not mean risking worker safety. The Honeywell BW™ Solo is controlled with the push of a button, even when wearing gloves. Both the one-button operation option and the use of the Honeywell SafetySuite Device Configurator allow for full configuration of the system in any location. This includes STEL or short-term exposure limits, TWA or time-weighted average measurements as well as peak gas detection data.

Visual Safety

Flashing green lights on the Honeywell BW™ Solo indicate compliance with the detector using the IntelliFlash™ feature. Green means compliance and correct monitoring and bump testing.

Flashing red means non-compliance, which can be a battery issue, gas event, or the need for a bump test.

Loud Alarms

Auditory and vibrating alarms, combined with highly visible red LED around the face of the detector, make it easy to see and hear any alarms.

Ease Of Configuration and Use Anywhere

Tracking Made Simple

Assigning detectors to workers or to locations makes tracking and monitoring easy and fast.

Rolling 24-Hour Peak Gas Readings

Having data on peak gas readings under the alarm set point over a rolling 24-hour period is essential to prevent potential problems. The Honeywell BW™ Solo provides this data to help make workplaces safer.

Multi-Language Capability

Used across the globe, the Honeywell BW™ Solo offers gas reading data in all major languages.

Part Number: BWS-G-Y

Making portable single-gas detection convenient and accurate.

Practical, lightweight design

The smaller, compact design of the Honeywell BW™ Solo makes this a practical companion for any worker in any environment.

Low cost, long life, and easy service

Simplicity is the key design element in the Honeywell BW™ Solo. Changing a sensor filter is done through a pop off door in the front of the unit, and sensor and battery replacement is just as simple.

All the sensor you need for common and exotic gas

Used across all industries, including in steel manufacturing, petrochemical plants, and power plants, this sensor can detect:

• Ammonia (NH₃)
• Carbon monoxide (CO)
• Chlorine (Cl₂)
• Chlorine dioxide (ClO₂)
• Ethylene oxide (ETO)
• Hydrogen (H₂)
• Hydrogen sulfide (H₂S)
• Hydrogen cyanide (HCN)
• Nitrogen dioxide (NO₂)
• Nitrogen oxide (NO)
• Oxygen (O₂)
• Ozone (O₃)
• Phosphine (PH₃)
• Sulfur dioxide (SO₂)

The foremost single-gas detector to use the 1-Series sensor for increased performance, accuracy, and safety.

As a next-generation sensor, the 1-Series sensor is the optimal sensor in any environment, offering long life, top performance, and fast response.

Detecting CO, H₂S, and O₂ – with more to come

With a sensor that is about one-third the size of others in the industry, as well as a unique square shape, the design of the detector is small and compact. The square shape also allows faster gas diffusion for more rapid response times.

3-year warranty coupled with up to 5-year sensor life

For the lower cost of ownership, less downtime, and fewer sensor replacement requirements, the 1-Series sensor cannot be beaten. With typical gas exposure, the sensor lasts up to 5 years, and the 3-year warranty offers peace of mind.

Developed in-house.

Developed by Honeywell company City Technology, the 1-Series sensor has over 40 years of sensor expertise and experience behind its design. It is crafted with reliability and quality in mind, similar to the City Technology's 40xLL and the 40VX oxygen sensors in the Honeywell BW.

End nuisance alarms across environments.

The 1-Series sensor is tested to work in environments where high humidity, transient pressure, and temperatures from -40°C to 60°C are factors to consider. With proven accuracy in even the most demanding environments, these are the ideal sensors for any location.

Sensor switch-out without any risk of damage.

As a practical design feature, the 1-Series sensor allows for the replacement of sensors without any exposure to the printed circuit board, making the process easy and safe.

Add efficiency with centralized data and fleet management automation.

Combining the features of the Honeywell BW™ Solo, IntelliDox, and Honeywell SafetySuite Device Configurator software offers increased compliance, productivity, and safety.

The IntelliDox docking solution for automation

The IntelliDox dock allows you to connect the Honeywell BW™ Solo and complete a range of automated tasks, including data transfer, bump tests, changing set points for alarms, and completing calibration and bump reminders. It is also an ideal option for updating firmware. Using the fleet management software ensures that all peak readings, alarms, and required data can be quickly transmitted using USB or Ethernet.

Grouping up to five IntelliDox docks allows for individual detector operation with shared power and calibration gas. All docks come with a state-of-the-art LCD screen, pump, and keypad for easy operation.

Device Configurator software

The Windows-based Device Configurator software allows for export and viewing of data, configuration of the detector, and firmware updates all from your computer. This makes fleet management compliance, productivity, and safety much more manageable.

Added benefits with the cloud-based Honeywell SafetySuite Device Manager

Subscribing to the cloud-based technology offered by Honeywell SafetySuite Device Manager allows you to:

• See all detectors, alarms, and compliance status on one dashboard for quick identification of problems and gas events.
• Prepare reports.
• Store reports in a centralized location for easy retrieval for investigations and audits.
• Receive real-time alarm notifications via text or email.
• Add compliance features.

Get the app to setup, configure, and verify.

For any worker with a smartphone, simply pairing the Honeywell BW™ Solo and using the Device Configurator app is an effective way to setup, configure and adjust all parameters of the detector, as well as complete firmware updates. The technology uses Bluetooth Low Energy (BLE) and can be operated from up to 6 meters away from the detector.

The app can review calibration and bump data, and even see who completed the calibration, when it was done, and the specific gas. This information can also be emailed in a certified to required stakeholders.

Connect without a docking station.

For larger fleets, using a smartphone app eliminates the need for the IntelliDox docking station. This allows easy sharing of data through the cost-effective app format.

Remote safety monitoring.

Knowing what is happening in real-time is important for safety managers, and the app allows this without the need to dock the detector. Data is sent through the Safety Communicator app to the real-time Honeywell monitoring software. Information is then available through any internet-connected device for worker location and safety.

Operational ease for increased compliance throughout the workplace.

Single-button control and operation

Working in the field often means gloves and safety gear, and the Honeywell BW™ Solo takes this into consideration with easy one-button control, ideal for use with gloves. In addition, the Honeywell SafetySuite Device Configurator software can also be used to configure, adjust, and set parameters on the detector. It is also simple to access data on STEL (short-term exposure limits), TWA (time-weighted average), and peak gas readings over a rolling 24 hours.

Visible confirmation of detector compliance or noncompliance

The Honeywell BW™ Solo can be set up to show compliance or out of compliance status. Compliance status is indicated by green lights when the IntelliFlash™ is activated, which means it is operating correctly and has been bump tested.

The option to monitor for noncompliance is also done through the IntelliFlash™ feature. This is a flashing red light on the detector that indicates a gas event, the need for calibration, or the need for a new battery.

Variety of alarms to hear and see

When an alarm occurs, the Honeywell BW™ Solo illuminates with red LED lights around the screen. In addition, the detector vibrates while also emitting a loud alarm that is easy to hear and see in any environment.

Configure and use the detector with ease.

Track locations and workers

The detector can be assigned to locations or workers for rapid detection of alarms and gas events.

Rolling 24-hour peak readings

High gas readings under the level to trigger the alarm can be monitored with the rolling 24-hour peak reading record. This is essential to determine potential safety issues before they are serious concerns.

Display in major languages

The Honeywell BW™ Solo offers data on the screen in a range of different major languages for efficiency and safety.

Part Number: BWS1-A2-B

Part Number: 113588-L3

Part Number: BWS-HS-1

Part Number: SR-RR04

Part Number: BWS-A-LABEL

Part Number: BWS-B-LABEL

Part Number: BWS-C-LABEL

Part Number: BWS-D-LABEL

Part Number: BWS-E-LABEL

Part Number: BWS-G-LABEL

Part Number: BWS-H-LABEL

Part Number: BWS-M-LABEL

Part Number: BWS-N-LABEL

Part Number: BWS-P-LABEL

Part Number: BWS-R-LABEL

Part Number: BWS-S-LABEL

Part Number: BWS-V-LABEL

Part Number: BWS-X-LABEL

Part Number: BWS-Z-LABEL

Part Number: CG2A5034

Part Number: CG2A5058