Anemometer

SCT-108.002.32 SCT LESA IR Thermo Anemometer by ScichemTech

Includes:

• 9V battery
• Instruction manual
• Carrying case
• USB cable
• PC interface
• Window based software

Features:

• A complete portable SCT meter for air velocity, air flow and temperature measurements.
• Simultaneous display air flow in CFM/CMM or air velocity plus ambient temperature
• Combination of hotwire and standard thermistor, deliver rapid and precise measurements event at low air velocity
• Infrared thermometer measures remote surface temperature to 999F (537C) with 30:1 distance to spot ratio and laser pointer
• Wide range measurements of air velocity, fast response time
• Multifunction for air flow measurements : m/s, km/h, ft/ min, knots, mile/h
• Super large LCD with dual function display, read the air velocity and temperature at the same time.
• Ac power operated.

STA2 In Duct Hot-wire Anemometer by Fieldpiece

The STA2 is a Hot-wire Anemometer built for the HVACR professionals' air balancing needs. The compact probe tip makes measuring air velocity directly in the duct a breeze. It's great for traversing a duct and automatically calculating CFM without the hassle and expense of a bulky hood. The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct, and ensures that the probe is properly aligned.

This in duct hot-wire anemometer quickly calculates CFM from air velocity and free area. And with the intuitive interface, the STA2 makes it easy to capture the correct data.

• Measures air velocity and temperature
• Calculates CFM
• Slim 38" telescoping probe for in duct traversing
• Fast response time
• Dual display for combo of real-time CFM, air velocity, or temp
• Depth and direction indicators
• Minimizes turbulence effect with time/test point averages
• Hands-free testing with stabilizing cone and magnetic hanger

Includes

• Hot-wire Anemometer - STA2
• Stabilizing Cone
• Blow-molded Case with Padding

400563 4251 425 CFM Hot-Wire Anemometer Kit by Testo

The compact testo 425 anemometer with permanently attached thermal flow probe (probe head Ø 7.5 mm) incl. telescopic handle. Volume flow is shown directly in the display. Accurate volume flow calculation thanks to easy input of duct area. In addition, it is also possible to switch to the current temperature reading. Timed and multi-point mean calculation provide information on mean volume flow, flow speed and temperature reading. Min/max values can also be shown in the display. The Hold function makes it possible to freeze current readings in the display.

Kits includes:

• 0560 4251 - 425 CFM Hot-Wire Anemometer
• 0516 0210 - Soft carrying case - small

• Temperature, flow and volume flow measurement
• Multi-point and timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto Off function
• TopSafe, the indestructible protective case (optional)
• TopSafe, instrument protection against dirt and knocks

SCT-108.002.30 SCT LEN LCD Digital Anemometer by ScichemTech

Includes:

• On/off
• H/T
• °F/°C
• 10 memories
• Air velocity unit
• Avg (multi point)
• Air flow volume measurement
• Avg/max/min reading

Features:

• A complete portable SCT meter for air / wind velocity and temperature measurements.
• Instant display of the air velocity and temperature
• Maximum, minimum and average value calculation
• Easy airflow volume calculation (CFM/CMM)
• 10 memories data storage/ recalling/clearing
• Data hold/test function
• One hour auto shut off function
• Battery operated with low battery indication.

Measuring Range: 0 to +50 °C
Measuring Range: 0 to +5 m/s

SCT-108.002.31 SCT LEMA IR Thermo Anemometer by ScichemTech

Includes:

• 9V battery
• Instruction manual
• Carrying case

Features:

• A complete portable SCT meter for air velocity, air flow and temperature measurements.
• Simultaneous display air flow in CFM/CMM or air velocity plus ambient temperature
• Combination of hotwire and standard thermistor, deliver rapid and precise measurements event at low air velocity
• Infrared thermometer measures remote surface temperature to 999F (537C) with 30:1 distance to spot ratio and laser pointer
• Wide range measurements of air velocity, fast response time
• Multifunction for air flow measurements : m/s, km/h, ft/ min, knots, mile/h
• Super large LCD with dual function display, read the air velocity and temperature at the same time.
• Ac power operated.

0560 1405 01 405i Hot-wire Anemometer Wireless Smart Probe by Testo

The testo 405i Smart Probe hot-wire anemometer is a wireless instrument for measuring air flow velocity, temperature, and volume flow. It is equipped with a telescopic shaft which extends to 15" for easy in-duct testing. You can reliably determine timed and multipoint flow traverses. Users can read the measurements using the testo Smart Probes App installed on their smart device. The app lets users configure duct dimensions to calculate volume flow measurements. Use the testo 405i along with the testo 605i thermo-hygrometer to determine cooling and heating performance. The testo 405i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, volume flow, and temperature
• Measures in-duct air flow and automatically calculates volume flow (enter duct dimensions simply)
• Small dia. (<0.5") and 15" telescopic shaft length is ideal for in-duct flow averaging and timed traverse
• Perform air duct leakage tests
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

98767-05 Traceable® Digital Anemometer with Temperature and Calibration by Digi-Sense

This digital thermoanemometer features a remote 2-3/4" vane probe on a 4-ft (1.2 m) cable. The vane's low-friction design provides a wide range of 80 to 5910 ft/min (0.4 to 30 m/s, 1.4 to 108 km/hr, or 0.8 to 53.3 knots). Robust construction handles years of use in the lab or field.

Measure temperature with the external probe from 32 to 140°F (0 to 60°C), with 0.1° resolution and ±2°F (±1°C) accuracy. Freeze the display with the press of a button. Unit also features a back-mounted stand for benchtop use.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Measure air velocity and temperature in air ducts, fume hoods, and outside
• Detect even slight air movement - 80 to 5910 ft/min (0.4 to 30 m/sec) range!

Includes

Battery, carrying case, vane probe on a 4-foot cable, flip-open stand, and NIST-traceable calibration certificate with data.

SX-A Wind Speed Anemometer by Agrowtek

High quality wind speed anemomter sensor for SXW weather station transmitters. Made in USA.

• 0 - 125mph
• 25ft Cable
• Mounting Bracket

AAV3 Air Velocity and Temperature Accessory Head by Fieldpiece

The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units: Ft/min, M/s, MPH, KM/hr, °F (degrees Fahrenheit) or °C (degrees Celsius). Multiply your air velocity by the register's free area to estimate CFM or diagnose duct blockages and quickly check the airflow balance in a conditioned space. Use with our DL3 Data Logger to track airflow or temperature over time. Features average and real time testing modes.

The AAV3 Anemometer Air Velocity and Temperature Accessory offers several features and benefits to field technicians:

• Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges and our detachable leads.
• Measures air velocity and measures air temperature.
• Measure in hard to reach areas using detachable test leads.
• Display readings smoothly in average mode or switch to real-time measurement.
• Low battery indicator.
• Auto-power off after 10 minutes (may be disabled).
• Estimate CFM
• Large vane covers most of register's free area

Includes

• Air Velocity and Temperature Accessory - AAV3
• 9V Alkaline Battery (installed)
• Operator's Manual

0560 4251 425 CFM Hot-Wire Anemometer by Testo

The compact testo 425 anemometer with permanently attached thermal flow probe (probe head Ø 7.5 mm) incl. telescopic handle. Volume flow is shown directly in the display. Accurate volume flow calculation thanks to easy input of duct area. In addition, it is also possible to switch to the current temperature reading. Timed and multi-point mean calculation provide information on mean volume flow, flow speed and temperature reading. Min/max values can also be shown in the display. The Hold function makes it possible to freeze current readings in the display.

• Temperature, flow and volume flow measurement
• Multi-point and timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto Off function
• TopSafe, the indestructible protective case (optional)
• TopSafe, instrument protection against dirt and knocks

0560 1410 01 410i Vane Anemometer Wireless Smart Probe by Testo

The testo 410i Smart Probe is a compact wireless vane anemometer for measuring air velocity, and temperature and deriving volume flow. It is used at air outlets, and for monitoring the air flow of ventilation systems. Users can read the measurements using the testo Smart Probes App installed on their smart device. It is easy to configure volume flow measurements and to reliably run timed multipoint averaging traverses. It is especially useful for balancing multi-outlet ventilation systems by using several instruments. The testo 410i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, volume flow, and temperature
• No air density correction required due to design
• Measures air flow at registers and automatically calculates volume flow (enter duct dimensions simply)
• Measure volume flow at several outlets simultaneously (using mutiple Smart Probes) to adjust system balance
• Timed/multipoint averaging to get accurate air flow profiles
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

WD-20250-22 Data Logging USB Vane Anemometer with NIST Traceable Calibration by Digi-Sense

Operate as a handheld instrument or mount for flexible positioning. Takes and records precise air velocity measurements in seven user-selectable units. Easily download data to a PC for analysis and graphing. Use recorded data to enhance safety and comfort in your environment.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• User-selectable units of measurement: ft/min, m/s, mph, km/h, or knots
• Measure air velocities up to 3937 ft/min (20.0 m/s)
• Adjust sampling intervals from once every two seconds to once every 24 hours
• Two modes (manual and automatic) start data logging function
• Analyze and graph logged data
• Collect up to 32,000 readings in memory
• Visual LED alerts with selectable high and low alarm levels

Applications

• Measure and analyze component cooling air velocities
• Test and evaluate ventilation air velocities in working, living, and storage areas
• Analyze and troubleshoot ventilation performance
• Monitor outdoor wind velocities

Includes

Data analysis software on CD, articulated screw-on mounting stand, one 3.6 V replaceable battery, and NIST-traceable certificate with data and uncertainties.

98767-11 Traceable® Hot Wire Anemometer with RS-232 Output and Calibration by Digi-Sense

This hot wire anemometer measures both temperature and air velocity with two miniature glass-bead thermistors for greater precision - even at low air speeds. No moving parts means friction errors are eliminated - ideal for cleanrooms and environmental tests.

Air speed can be displayed in five different units of measure: ft/min, m/s, km/hr, mph, and knots. Switch between °F and °C at the flip of a switch. Recall Min/Max temperatures and velocities, or freeze the display with the HOLD feature. RS-232 output allows for data acquisition to monitor and store readings on your PC.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Data acquisition software is not included - please see part number 37804-13 for software and connection cable needed.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Eliminate friction errors caused by vane anemometers
• Connect to a PC to monitor and store readings
• Obtain measurements from hard-to-reach places - probe extends to 3 feet (0.9 m)

Includes

Telescoping probe with 40-inch cable, six AAA batteries, sensor cover, computer output, and NIST-traceable calibration certificate with data.

Measuring Range: -20 to +70 °C
Measuring Range: 0 to +20 m/s

WD-20250-23 Mini Vane Anemometer with NIST Traceable Calibration by Digi-Sense

Precision, value, and convenient size in one meter! The Digi-Sense compact vane anemometer delivers accurate airflow measurements in seven user-selectable units. Its small comfort grip and ergonomically placed pushbuttons allow you to easily select either maximum or average air velocity readings.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• User-selectable units of measurement: ft/min, m/s, mph, km/h, or knots
• Measure air velocities up to 5900 ft/min (30 m/s)
• Manage airflow measurements easily with Max/Avg functionality
• Unique backlight sensor is automatically activated by low-light conditions—no need to manually turn on
• Auto power-off extends battery life

Applications

• Measure component cooling air velocities
• Assess ventilation air velocities in working, living, and storage areas
• Analyze and troubleshoot ventilation performance
• Measure outdoor wind velocities

Includes

One 9 V battery and NIST-traceable certificate with data and uncertainties.

37955-12 Traceable® Vane Thermoanemometer with Air Velocity, Temperature, and Calibration by Digi-Sense

The Digi-Sense family of air measuring instruments offers different levels of functionality, allowing you to select the one that best meets your application needs and budget. All models measure airflow and temperature.

The compact meters are designed for intuitive, instruction-free operation and have a Hold button to freeze display readings for easy recording of results. Min/Max readings are also captured. The tough ABS plastic housing and membrane keypad allow the anemometers to be used in harsh environments. A high contrast LCD display with 3/8" digits make it easy to read.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Easy to grip design
• Easy-to-use keypad

Includes

Four AAA batteries and NIST-traceable calibration certificate with data.

16007 922 Signature Wireless Weather Station by WeatherHawk

The WeatherHawk Signature Series family of weather stations measure and record wind speed and direction, air temperature and relative humidity, barometric pressure, solar radiation, and rain. In addition, the system calculates and exports an evapotranspiration (ET) value that can be used by third party systems for irrigation control. They are designed for applications where a visual impact is not a concern; and high reliability is significant factors in the decision to purchase.

The Signature Series family is fully compatible with all versions of software, data management, input power and mounting accessories designed for the WeatherHawk Series 500 family. It is also compatible with all third party certified software drivers.

The principle difference between the Signature Series and Series 500 WeatherHawk systems is that the Signature Series utilizes conventional, lower cost sensors, resulting in a lower system price. All WeatherHawk systems are industrial grade products, and they are easy to install, feature high reliability, and can be user serviced or repaired with replacement components that do not require field calibration, specialized tools or training.

Model 232

This version of the Signature Series weather station is directly connected to a host device (PC or server) through an RS232 serial data I/O located on the bottom of the weather station.

Models 916/922/240

These versions of the Signature Series weather station are wireless to a host device (PC or server) using fully integrated industrial grade MHz spread spectrum RF communications technology. The various model numbers reflect the center frequency of the radio, and the various frequencies are specifically licensed for use in various countries. All frequencies are licensed within the Americas, with the 916 (916 MHz) being preferred due to its greater range; the 240 (2.4 GHz) systems are generally acceptable worldwide; and the 916 (916 MHz) is licensed for use in Australia and New Zealand. The Signature Series wireless systems also have an RS232 serial data I/O located on the bottom of the weather station, which can be used as a second serial communications port, or for programming and testing the system, or for direct data downloads using a PC or PDA.

Various external antenna configurations are available for these wirless systems that can extend their LOS (line of sight) range from 1/2 mile for 900 MHz systems, to over 7 miles; and from 1/4 mile for 2.4 GHz systems to over 3 miles.

Sensor Technologies

Signature Series WeatherHawk weather stations employ well proven weather measurement sensors. Wind speed and direction use rotating anemometer and vane devices commonly used on professional wind velocity measurement systems. Rain is measured using a volumetric tipping bucket, self-draining rain gauge for rainfall. Barometric pressure, relative humidity, air temperature and solar radiation measurements are made by a combination of industrial and scientific grade sensors.

Wind Speed is measured by a three cup rotating anemometer. The rotating component of the sensor spins in response to the wind and turns a magnet within a coil to generate a sine wave output proportional to velocity. This technique is well proven and reliable under normal conditions, but the rotating component can lock up in freezing or icy conditions.

Wind Direction is measured by a sensor consisting of a vane connected to a wire wound resistor. As the vane turns on its pivot point the resistance increases or decreases with respect to wind direction. This is translated by the weather station into a measurement in degrees with respect to a datum, typically magnetic North, which is physically established when the weather station is installed.

Rainfall is measured with a tipping bucket rain gauge. During a rain event drops are captured in a funnel of a know size and directed through an orifice to form a drip stream. This drip stream flows into a volumetric measurement device (a tipping bucket or spoon), which fills with a calibrated amount and then tips. The tipping motion dumps the water and activates a switch which produces an electrical pulse. The water then drains from the bttom of the rain gauge and the mechanism returns to its catch location to fill again. The pulses are counted by the weather station and multiplied by the known volume of the tipping bucket to produce a rainfall amount, and when compared to time, a rainfall rate.

Air temperature and relative humidity (RH) sensors are combined in an integrated,user replaceable unit that requires no calibration. The RH sensor is a thin polymer, resistive sensor that degrades with exposure due to age and airborne contaminates. It should be user replaced every 18-24 months to maintain accuracy, and at a shorter interval if the location is subject to high levels of air pollution or is subject to airborne chemical spraying. The air temperature sensor is a fine wire thermistor, with a rapid response, and it is typically not subject to environmental degradation.

Barometric pressure is measured with a capacitive silicon temperature corrected strain gauge device that is typically not degraded by environmental exposure and does not require calibration after manufacture.

Solar Radiation is measured by a scientific grade silicon pyranometer with a cut filter limiting the spectral exposure to the 300-1100 nm wavelength. This device typically degrades at a rate of 2% of the full scale value each year and should be recalibrated, or replaced every 3-5 years, depending on the application.

Data Transfer Protocols, Software and Data Interface Hardware

All WeatherHawk systems communicate using a proprietary Pakbus protocol. Any qualified software developer may request a software development kit, at no charge, to assist in the development of software drivers for third party devices or software.

Software

WeatherHawk offers the following software applications for weather station management, data acquisition and logging, report generation and data display.

• Visual Weather Station a single host, multi-site professional application that will communicate with any WeatherHawk weather station, as well as CR200 Series data loggers from Campbell Scientific, Inc. Visual Weather Station adapts to any data telemetry scheme including direct connection, wireless short haul RF (spread spectrum radio), wireless long-haul RF (VHF/UHF radio), satellite modem, IP modem/server module, or landline and cellular modems. The application also offers a variety of standard and user defined reports and export file formats, and it will support the generation, export and update of a weather data GUI for a website. This application runs on PC-XP computers.
• WeatherHawk-XP/X - a single host, single site consumer application that will communicate with any WeatherHawk weather station. WeatherHawk-XP/X connects using a directly to the serial port on the WeatherHawk, or by wireless short haul RF (spread spectrum radio), or IP modem/server module, or landline and cellular modems. The application also offers a three exports file formats, and it will support the generation, export and updateof weather data GUI for a website. This application runs on PC-XP and Macintosh OS-X computers.
• Virtual Weather Station a single host, single site consumer application that will communicate with any WeatherHawk weather station. Virtual Weather Station connects directly through the serial port on the WeatherHawk, or by wireless short haul RF (spread spectrum radio). The application also offers a two export file formats, and it will support the generation, export and update of a weather data GUI for a website. This application runs on IBM compatible computers.
• LoggerNet a single host, multi-site professional application that will communicate with any WeatherHawk weather station, as well as any data loggers from Campbell Scientific, Inc. LoggerNet adapts to any data telemetry scheme including direct connection, wireless short haul RF (spread spectrum radio), wireless long-haul RF (VHF/UHF radio), satellite modem, IP modem/server module, or landline and cellular modems. The application also offers a variety of standard and user defined reports and export file formats, and with the RTMC module it will support the generation, export and update of a weather data GUI for a website. This application runs on IBM compatible computers.
• PConnect - a single host, single site proffesional application that will communicate with any WeatherHawk weather station, as well as a range of Campbell Scientific data loggers. PConnect is used for direct download and storage of data through the serial port on either the weather starion or its cmpanion RF4xx receiver (if wireless). The software is typically utilized for filed data acquisition with later export to a PC for post-processing, display and long-term archiving. It also enables on-site reprogramming of the weather station by uploading pre-configured program files. It is not designed for long haul or automated data collection protocols. This application runs on a range of PDA devices, check with Campbell Scientific, or WeatherHawk for a list of compatible units.
• Weather Display a single host, single site consumer application that will communicate with any WeatherHawk weather station. Weather Display connects directly through to the serial port on the WeatherHawk, or by wireless short haul RF (spread spectrum), or IP modem/server module. The application also offers a range of export file formats, and it will support the generation, export and update of a weather data GUI for a website. This application runs on PC-XP computers.

Data Interface Hardware

Weatherproof serial cables are available in 25, 50 and 75 foot lengths for permanent direct connection to the RS232 I/O on any WeatherHawk weather station. These cables feature nickel plated brass DB-9 connectors for corrosion resistance and have a Sanoprene jacket which is suitable for both high UV and direct burial environments.

An RF4xx spread spectrum RF transceiver is supplied as standard equipment with every wireless WeatherHawk weather station. The unit comes with an AC power supply (120 VAC/60 Hz), a 6 foot serial cable and an antenna. Additional RF4xx kits can be purchased for simultaneous communication with any WeatherHawk wireless weather station, enabling multiple host computers to use the data from a single weather station. Typical applications for multiple receiver units are in home automation where a single weather station may support a whole house control unit, with touch panel data display units; and a discrete PC, which may act as the server for a local intranet or internet weather data display website.

WeatherHawk IP server modules are a proprietary web server that is designed to interface the serial output of any WeatherHawk weather station, or companion RF4xx transceiver with an Ethernet. Output formats from the IP server module are HTML, XML and CSV (with headers).

Mounting Systems

All WeatherHawk weather stations will interface with the full range of mounting systems supplied by WeatherHawk. They consist of:

TP-1 Tripod The tripod, with its range of accessories is the most rugged and adaptive weather station mounting system. It supports both rooftop (sloped and flat) and ground mounts, with mast heights to 10 feet. Accessories consist of a weather station alignment kit (optional), ground stakes (optional), a rooftop sealing kit (standard), grounding rod kit (optional), mast length extensions (optional), and a guy-wire kit (optional).

HM Series The HM Series house mount kits are adapted satellite dish mounts that will support attachment to sloped and flat roofs, and to the vertical facia and reinforced trim boards around the roofline of a home. The accessories consist of mast extensions, a Retro-deck base assembly that offers additional stability and support on composite roof coverings; and a Comm-deck mount that offers a weatherproof penetration through a roof for a directly connected weather station.

Various additional specialized mounting tripods are available for high environmental abuse environments, or quick deployment temporary applications.

400563 4170 417 Large Vane Anemometer Kit by Testo

The compact testo 417 anemometer with built-in flow/temperature vane Ø 100 mm to measure flow speed, volume flow and temperature. Volume flow is shown directly in the display. Accurate volume flow calculation thanks to easy input of duct area. In addition, it is easy to switch to the current temperature reading. The flow direction, i.e. drawn in or blowing, is visible in the display. Timed and multi-point mean calculation provide information on mean volume flow, flow speed and temperature readings. The optional funnel set facilitates efficient measurements at ventilator grilles and disc outlets. Min/max values can also be shown in the display. Current readings can be frozen in the display using the Hold function.

Kits includes:

• 0560 4170 - 417 Large Vane Anemometer
• 0516 0210 - Soft carrying case - small

• Direction of flow recognition
• Temperature, flow and volume flow measurement
• Multi-point and timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto Off function
• Built-in Ø 100 mm vane

595C1 Digital Humidity Thermometer by Test Products International

Features

• Hot wire anemometer is required to accurately measure below 80 feet/minute
• Measure air velocity and temperature simultaneously
• Record & recall Max, Min, & Avg
• Data hold
• Auto power off (10 min.)
• Low battery display
• Multiple measuring units: (m/s, k/h, mile/h, knots, ft./min)
• Download to a computer using the RS-232 port and optional A500 cable
• 39" cable length, hard-wired

Applications:

• Building maintenance
• Computer rooms
• Heating & air conditioning systems
• Bakeries
• Humidistats calibration

400563 5122 512-2 Digital Manometer/Anemometer Kit by Testo

testo 512 simultaneously shows pressure and flow velocity (apart from version 0 to 2000 hPa) in the large, easily legible, illuminated display, the measurement values can be printed out on site with date and time as well as minimum and maximum values.

testo 512 has two switchable units for flow velocity, and for pressure, eight units can even be set.

In the testo 512, damping for a sliding mean value calculation can be individually programmed, tightness compensation is integrated. The actual value displayed can be frozen in the display with the Hold-button, and the minimum and maximum values can be displayed and stored in the instrument.

The TopSafe protects the instrument from impact, dirt and splash water in tough practical applications (optional).

Kit Includes:

• 0560 5128 - 512 Digital Manometer +/- 80" WC (0 to 200hPa)
• 0635 2145 - "L"-type pitot tube 13" SS 1112°F max
• 0554 0440 - Silicone hose (16' long)
• 0516 0201 - Carry case

The differential pressure measuring instrument testo 512 is available in four different versions:

• Measuring range 0 to 2 hPa
• Measuring range 0 to 20 hPa
• Measuring range 0 to 200 hPa
• Measuring range 0 to 2000 hPa (without flow velocity and Pascal measurement)

• 8 pressure units can be selected: kPa, hPa, Pa, mm H2O, mmHg, psi, inch H2O, inch Hg
• 2 flow velocity units can be selected: m/s, fpm
• Integrated tightness compensation
• Display illumination
• Max./min. as well as Hold-function
• Printout of measurement values incl. date/time and min./max. values

GrowControl™ SXW Outdoor Weather Sensor by Agrowtek

GrowControl SXW Weather Monitor & Controller is a precision digital outdoor climate monitor featuring temperature, relative humidity, ambient light, and optionally CO2 ppm sensors. Also includes inputs for Agrowtek's wind speed anemometer, wind direction vane, and IR rain sensors. Housed in a rugged stainless steel enclosure and designed for pole or wall mounting.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol

Sensors

• Air Temperature: -20 - 60°C
• Relative Humidity: 0-99% RH
• Light (Irradiance): 0-2000 Watts/m2
• Carbon Dioxide (optional): 0-10,000 ppm
• Barometric Pressure (optional): mm-Hg, in-Hg
• Wind Speed: 0-100 mph, kmh
• Wind Direction: 0 - 359°
• Rain
• Real Time Clock (RTC): Battery Backup optional
• Fan aspirated with air filter for high accuracy

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ Digital Communication Port
• MODBUS RTU via LX2 ModLINK Optional 4-channel 4-20mA analog outputs
• Weather-proof stainless-steel enclosure
• 1-Year Warranty
• Made in USA