4 Gas

25 PPM H2S, 100 PPM CO, 50% LEL CH4, 18% O2 F105325PM59 old part number
F105325MX59 New Part Number

25 PPM H2S, 100 PPM CO, 50% LEL CH4, 18% O2

Z105325MX59 New Part Number
Z105325PM59 Old Part Number

Includes 58 Liter Calibration Quad gas, Regulator, Tubing, and Carrying Case. 25PPM H2S, 100 PPM CO, 50% LEL CH4, 18% O2

DISPLAY; LCD; 4 GAS; M40

Honeywell Analytics 4 Gas, Oxygen, Flammable, Ammonia, Chlorine

Changing from a 2 Gas Chamber to a 4 Gas Chamber

*Please note we can only ship RKI products to customers within the United States

T4-HOCA T4 Personal Gas Monitor, 4 Gas - H2S, O2, CO, CH4 % LEL by Crowcon

T4 integrates innovative safety features and an intuitive, rugged design to provide advanced protection for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H₂S), flammable gases and oxygen (O₂) depletion.

Features

• TWA resume function - unique to T4, this innovative feature ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
• 18 hour battery life - safely work multiple or longer shifts between charges, covered by the 18 hour battery life.
• Backlit display - large, clear display with backlight and option to flip the screen 180° for easy viewing while worn.
• Rugged design - with a thick anti-shock rubber casing and drop-tested to 13.1 feet on concrete, T4 provides dependable operation under the most demanding use.
• Water & dust-resistant to IP65 & IP67 - provides protection in the harshest environments.
• Dedicated sensors - one sensor for every gas ensures effective, fast and reliable detection.
• Positive safety indicator - a simple 'traffic light' status indicator which, at a glance, provides visual assurance of operational and compliance status to both users and supervisors. Green light - Working safely. Red light - Attention required
• Intrinsically safe - ATEX approved and UL Class 1 Div 1 for safe operation in a wide range of hazardous environments.
• Multiple alarms - audible 95dB alarm, bright red/blue LED's and vibrating alerts provide effective warning to gas hazards.
• Easy operation - large single button and intuitive menu system minimize training and allow easy operation while wearing gloves.

XT-XWHM-Y-NA GasAlertMax XT II 4 Gas Detector %LEL, O2, H2S, CO Yellow by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XTXWHMYNA

Gas Alert MAX XT II Confined Space Meter with built in Sampling Pump

What it does

• Built in Sampling pump draws a remote gas sample from a confined space. It detects the 4 most common gas hazards in a confined space CO, H2S, LEL, and O2.

Features

• Remote sampling to 75 ft
• Fast Startup time
• 2 year warranty including sensors
• Can operate in pump mode or diffusion mode
• Clear window to determine if filter needs to be changed
• Internal rechargeable battery provides 13 hours run time
• Loud 95 db audible alarm, bright visual alarms, strong vibration alarm
• Operates in most temperature extremes -4 Fahrenheit to 122 Fahrenheit
• Rubberized body
• Available in Yellow or Black

Sample from up to 75 feet away

The Gas Alert Max XT II's sampling pump can draw a gas sample from up to 75 feet away. This is especially ideal for confined space work that requires a gas sample to be taken before entry. Using the sampling pump is easy, simply attach the tygon tubing with quick disconnect to the instrument. You will hear and feel a small "click" as the fitting locks onto the instrument. Now make sure that your filter is attached to the end of the sampling line. This will prevent any dust or water from being drawn into the instrument. The instruments powerful pump will draw gas at a rate of 2 seconds per foot of tubing. So if you are using the standard ten feet of tubing that is included with the instrument you would wait approximately 20 seconds for the gas to reach the instrument.

Sampling mode or diffusion mode

One of the Gas Alert Max XT II's most unique features is its ability to operate in either diffusion mode or sampling mode. The sampling mode is ideal for testing the atmosphere of a confined space before entry. After entry into the confined space you have the option of removing the front cover to turn the pump off. This cover is removed easily with the included screwdriver and removing it turns off the sampling pump. The unit is now ready to take samples in diffusion mode. If you need to restart the pump simply screw the front cover back onto the instrument and it will turn the pump back on.

Long battery life

The gas alert max xt has enough run time to last for 13 hours with the pump running continuously. With this long run time you can be assured that you won't have to worry about the battery not lasting for an entire work shift.

Easy to update

The Gas Alert Max XT II's software can be updated using the IR link adaptor (sold separately P/N# GA-USB1-IR). This means that as new features are added you will be able to download the new firmware and update your unit. For example, a firmware update was recently made available to all owners adding the new Intelliflash feature. This feature adds a flashing green light that lets the user know that the monitor is functioning properly without having to look at the screen.

What is the difference between the Gas Alert Max XT and the Gas Alert Max XT II?

The only difference is an improved oxygen sensor. The original Gas Alert Max XT used the P/N# SR-X-MC oxygen sensor. The new Gas Alert MAX XT II uses a much more reliable and longer lived sensor, the P/N# SR-X10-C.

Filters

The Gas Alert Max XT II contains three levels of filtration to prevent the passage of water and dust into the pump. The first filter is placed on the end of the sampling line and filters the majority of particles and water. The second filter is a wafer style filter that is visible through a clear window on the back of the unit. This window allows the user to determine if the filter needs to be changed. The third filter is a paper filter that effectively isolates any dirt or water that may have made it past the first two filters. This 3 stage filtration system has proven to be extremely effective even in very dirty or wet environments. If you have experienced clogged pumps on other models of instruments then the Gas Alert Max XT II is a good choice for your work environment.

Part Number: XTXWHMBNA

BW Technologies MicroDock II Automatic Test and Calibration Station with 4 Gas Inlets without Power Supply

Part Number: DOCK2400G

Bottom Case Assembly, Eagle, Standard 4 Gas (No Sensors)

*Please note we can only ship RKI products to customers within the United States

Adding Standard 4 Gas Block & Sensor to Eagle 2

*Please note we can only ship RKI products to customers within the United States

GX-2001, 4 Gas LEL/O2/H2S/CO with Belt Clip, with 12 VDC Charger

*Please note we can only ship RKI products to customers within the United States

GX-2001, 4 Gas LEL/O2/H2S/CO with Alligator Clip, with 12 VDC Charger

*Please note we can only ship RKI products to customers within the United States

72-PAX-A-56 GX-3R Pro 4 Gas Personal Monitor, LEL/Oxy/H2S/CO, w/alkaline battery pack/cal kit by RKI Instruments

The GX-3R Pro is the world's smallest 5-gas monitor weighing only 4.58 ounces and fits in the palm of your hand (2.9" W x 2.6" H x 1.06" D). It simultaneously monitors and displays 5 different gases. In addition to monitoring standard confined space gases, LEL, O₂, CO, & H₂S, the GX-3R Pro has a 5th channel where you can add infrared or toxic sensors. Two of the four sensor slots have interchangeable sensors providing flexible configurations, which can easily be changed in the field.

The GX-3R Pro comes equipped with Bluetooth wireless communication, man-down alarm, the choice of alkaline or rechargeable power supply, and a 3 year warranty. The Lithium-ion battery pack will operate for 25 hours and will fully charge in 3 hours.

The GX-3R Pro utilizes Bluetooth communication to display direct gas readings from the instrument to a phone app, which is available free on either iOS or Android phones. Automatic notifications can be programmed to send text or email messages, if there is an alarm event from the GX-3R Pro.

Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it's 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.

Features

• Smallest & lightest 5 gas monitor: 2.9" W x 2.6" H x 1.06" D , 4.58 ounces
• Simultaneous detection of 5 gases: LEL, O₂, H₂S, CO, and other optional sensors; H₂ Compensated CO sensor available
• Simple 2-button operation
• Bluetooth communication with iOS & Android App
• Non-Compliance Indicator
• 3 user adjustable alarm levels
• Panic Alarm - Tap instrument twice
• Man Down Alarm
• Impact resistant body
• Large full dot, auto-backlit display with auto-rotation
• Stealth mode for law enforcement
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

Honeywell Analytics 4 Gas, Oxygen, Flammable, Carbon Monoxide, Hydrogen Sulfide

Honeywell Analytics 4 Gas, Oxygen, Flammable, Ammonia, Sulfur Dioxide

Honeywell Analytics 4 Gas, Oxygen, Flammable, Carbon Monoxide, Ammonia

Honeywell Analytics 4 Gas, Oxygen, Flammable, Carbon Monoxide, Chlorine

Honeywell Analytics 4 Gas, Oxygen, Flammable, Carbon Monoxide, Nitrogen Dioxide

Honeywell Analytics 4 Gas, Oxygen, Flammable, Carbon Monoxide, Sulfur Dioxide

Honeywell Analytics 4 Gas, Oxygen, Flammable, Carbon Dioxide, Ammonia