Electrical Instruments, Testo

0590 0001 Magnetic Hanger by Testo

Use the magnetic suspension system for quick attachment of digital multimeters to metal surfaces, for example on heating systems or switching cabinets. Simply thread the suspension system through on the rear of the measuring instrument. Thanks to the magnet, digital multimeter and suspension system adhere to the equipment - which means you have both hands free for your measurement.

• Fast attachment of digital multimeters, e.g. onto switching cabinets
• Both hands free for measurement thanks to the magnetic suspension system

Includes:

Magnetic suspension system.

0590 0002 Thermocouple Adapter Type K for 760-2/-3 by Testo

Using the digital multimeter, it is also possible to measure temperatures in addition to electrical parameters. This adapter is used to attach type K thermocouple temperature probes to your digital multimeter.

Simply insert the adapter into the digital multimeter and attach a type K thermocouple temperature probe onto the adapter. Please note that temperatures can only be measured in the range between -20 and +500°C.

The adapter enables accurate temperature measurement, because it has ambient temperature compensation.

• For attaching type K thermocouple temperature probes
• Measuring range -20 to +500°C

Includes:

Adapter for type K thermocouples, including lithium battery CR 2032.

0590 0003 Current Clamp Adapter for 760-2/-3 by Testo

You can easily manage even in tight spots with this clamp meter adapter! The movable pincer arm can be fully retracted, so that you can for instance grab tightly packed cables in switching cabinets as if you were using a hook.

The clamp meter adapter for non-contact current measurement makes direct / alternating current measurement up to 400 A AC/DC possible. You can attach the clamp meter adapter to a suitable digital multimeter made by Testo or to other makes of digital multimeter which have a resolution in the mV range.

• Fully retractable pincer arm - ideal for measurements in tight places
• Direct / alternating current measurement up to 400 A AC/DC possible
• Display of 1 mV per A
• Overvoltage category CAT IV 600 V

Includes:

Clamp meter adapter for non-contact current measurement, including three AAA batteries.

0590 0004 Fuse Set 5x 10A/1000V by Testo

Use the spare fuses when the fuse in your measuring instrument is faulty. These spare fuses have an overload protection of 10 A / 1000 V.

• 10 A / 1000 V overload protection
• Delivery quantity: 5 items

Includes:

Spare 10 A/1000 V fuses, 5 items.

0590 0005 Fuse Set 5x 10A/600V by Testo

Use the spare fuses when the fuse in your measuring instrument is faulty. These spare fuses have an overload protection of 10 A / 600 V.

• 10 A / 600 V overload protection
• Delivery quantity: 5 items

Includes:

Spare 10 A/600 V fuses, 5 items.

0590 0006 Fuse Set 5x 630mA/1000V by Testo

Use the spare fuses when the fuse in your measuring instrument is faulty. These spare fuses have an overload protection of 630 mA / 1000 V.

• 630 mA / 1000 V overload protection
• Delivery quantity: 5 items

Includes:

Spare 630 mA/1000 V fuses, 5 items.

0590 0007 Fuse Set 5x 630mA/600V by Testo

Use the spare fuses when the fuse in your measuring instrument is faulty. These spare fuses have an overload protection of 630 mA / 600 V.

• 630 mA / 600 V overload protection
• Delivery quantity: 5 items

Includes:

Spare 630 mA/600 V fuses, 5 items.

0590 0008 Set Saftey Alligator Clips by Testo

If you want to carry out easy measurements on systems, these safety crocodile clips are just right for you! The large dimensions mean they are easy to grip and therefore make it easier to clamp cables.

For mounting, the safety crocodile clips made of hard plastic are simply attached to the Testo standard measuring cables (order-number 0590 0011; 0590 0012; 0590 0013; 0590 0014) or other makes of measuring cables.

• CAT III 600 V measurement category
• Maximum current: 10 A
• For attachment onto Testo standard measuring cables (order-number 0590 0011; 0590 0012; 0590 0013; 0590 0014) or other makes of measuring cables
• Delivery quantity: 1 set of safety crocodile clips

Includes:

1 set of safety crocodile clips, CAT III 600 V measurement category, maximum current 10 A.

0590 0009 Set Alligator Clips by Testo

Crocodile clips are practical when measuring electrical parameters, because you can clamp the cable with them. For mounting, the crocodile clips are simply attached to the Testo standard measuring cables (order-number 0590 0010) or other makes of measuring cables.

• CAT IV 600 V / CAT III 1000 V measurement category
• Maximum current: 10 A
• For attachment onto Testo standard measuring cables (order-number 0590 0010) or other makes of measuring cables
• Delivery quantity: 1 set of crocodile clips

Includes:

1 set of crocodile clips, CAT IV 600 V / CAT III 1000 V measurement category, maximum current 10 A.

0590 0010 Set 2mm Test Leads (90° plug) by Testo

These high-quality standard measuring cables with an angled plug and an 0.7 inch long tip can be attached to Testo clamp meters, Testo digital multimeters or other makes of multimeter. The rubber-coated grips of the standard measuring cables offer a secure hold and so ensure easy measurement of electrical parameters.

• CAT II 1000 V measurement category
• Tip Ø: 0.07 in.; tip length: 0.7 in.
• 1 set of measuring cables with angled plug

Includes:

1 set of standard measuring cables (angled plug), tip &Oslah;: 0.07 in.; tip length: 0.7 in.

0590 0013 Set Lead Extensions (straight plug) by Testo

The cables supplied with the measuring instrument are not always the best solution. Depending on the application, a measuring cable extension is the best choice. Because you can make a direct connection between the measuring instrument and for instance a banana jack, without needing to use cumbersome crocodile clips. The same applies for example to test sockets, which are often present on boards. The measuring cable extension can also be used for crocodile clips, such as the Testo safety crocodile clips (0590 0008), which means there are universal application options.

• CAT IV 600 V / CAT III 1000 V measurement category
• Maximum current: 10 A
• 1 set of measuring cable extensions with straight plug
• For attachment onto standard measuring cables

Includes:

1 set of measuring cable extensions (straight plug) , length: 1115 mm.

0590 0015 Set Replacement Tips testo 755 by Testo

These replacement measuring tips can quickly replace existing measuring tips. Simply remove the faulty measuring tips from the plug-in connection and attach the replacement measuring tips.

The grips of the replacement measuring tips offer a secure hold and so ensure easy measurement of electrical parameters.

• CAT IV 600 V / CAT III 1000 V measurement category
• 1 set of replacement measuring tips

Includes:

1 set of replacement measuring tips for current/voltage testers.

0590 0016 Carrying Case testo 760 by Testo

You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

• Outside: impact-resistant transport bag with zip fastener
• Inside: two mesh compartments
• Dimensions: 215 x 150 x 70 mm

Includes:

Transport bag (without measuring instrument and accessories).

0590 0017 Carrying Case testo 770 by Testo

You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

• Outside: impact-resistant transport bag with zip fastener
• Inside: two mesh compartments
• Dimensions: 270 x 150 x 75 mm

Includes:

Transport bag (without measuring instrument and accessories).

0590 0018 Carrying Case testo 750/testo 755 by Testo

You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

• Outside: impact-resistant transport bag with zip fastener
• Inside: two mesh compartments
• Dimensions: 285 x 110 x 50 mm

Includes:

Transport bag (without measuring instruments and accessories).

0590 0021 Thermocouple Adapter Type K (770-2/-3) by Testo

Using the clamp meter, it is also possible to measure temperatures in addition to electrical parameters. This adapter is used to attach type K thermocouple temperature probes to your clamp meter.

Simply insert the adapter into the clamp meter and attach a type K thermocouple temperature probe onto the adapter. Please note that temperatures can only be measured in the range between -20 and +500°C.

The adapter enables accurate temperature measurement, because it has ambient temperature compensation.

• For attaching type K thermocouple temperature probes
• Measuring range -20 to +500°C

Includes:

Adapter for type K thermocouples, including lithium battery CR 2032.

0590 7450 745 Non-Contact Voltage Tester by Testo

The testo 745 non-contact voltage (NCV) tester quickly checks for the presence of voltage in AC powered systems. It can be safely used up to 1000 V AC. When AC voltage is detected, the testo 745 gives indication by flashing RED LEDs and buzzing audible tones.

You can easily determine the hot and neutral legs of an outlet without lengthy and risky removal of the outlet. The testo 745 NCV has a built-in Low Pass Filter which greatly reduces high frequency interference which causes false indications. The built-in LED flashlight is bright and focused to make testing simple in dark spaces. It also includes a low battery indication and is waterproof and dustproof rated per IP 67. The testo 745 is rated to CAT III 1000 V and CAT IV 600 V.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Two sensitivity levels with audible and visual indication
• Flashing LED indicates sensitivity range down to 12 V AC or standard range above 50 V AC
• Differentiates hot from neutral in AC outlets
• Low Pass Filter reduces false indications
• Waterproof and dustproof to IP 67
• Bright LED flashlight illuminates test area

0590 7501 750-1 Voltage, Continuity, Phase Sequence Tester by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

0590 7502 750-2 Voltage, Continuity, Phase Sequence Tester with GFCI Test & Flashlight by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

0590 7503 750-3 Voltage, Continuity, Phase Sequence Tester with GFCI Test, 3 Digit LCD, & Flashlight by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

0590 7551 755-1 Current/Voltage Tester by Testo

The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks. The instruments include important functions such as current, voltage, resistance & continuity. The integrated flashlight enables users to work in poorly lit areas.

The overall design is for convenient testing including interchangable measuring tips which can be easily updated and maintained. A convenient lead holder is integrated into the housing for safe and easy storage. The testo 755-2 includes important additional features: phase rotation, voltage range up to 1000V, and the unique feature which allows the user to check for voltage using only a single lead.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy
• Polarity detection for DC circuits
• 3-phase sequence check with motor rotation indication
• Single lead voltage test with audible indication
• Interchangeable measuring tips
• Built-in flashlight illuminates your measurements
• APO (Automatic Power Off) below 6 VAC