ScichemTech, Test and Measurement

SCT-108.001.24 SCT-THYG-PEN-4 Jumbo Tri-Thermo Hygrometer with Alarm Clock by ScichemTech

Features:

• Reliable SCT Pocket Type Meter for Humidity & Temperature measurement with Time Display.
• Comfort / Warm / cool index with Time Display.
• Option to select °F/°C.
• Maximum / minimum (°F /°C) temperature & humidity memory recalling.
• With 3 m sensor for outdoor measurements.
• Clock with alarm / snooze, 12 / 24 hour format.
• Battery operated.
• With Flipout Stand.

SCT-108.001.30 SCT-THER-PEN-1 LCD Digital Multi-Thermometer by ScichemTech

Features:

• Reliable SCT Tester for Temperature measurement.
• Small design and display.
• Option to select °F/°C.
• Option to hold / test data.
• Auto shut-off in 60 minutes.
• Sensing time 1 second .
• 133mm. Stainless steel sensor probe protective plastic sleeve with clip.
• Battery operated with low battery indicator.

SCT-108.001.31 SCT-THER-PEN-2 T-Bar Digital Stem Thermometer by ScichemTech

Features:

• Reliable SCT Tester for Temperature Measurements.
• T - Bar shaped - good design.
• Good - Temperature - max/min range.
• Option to select °F/°C.
• Option to select test / hold date.
• Sensing time 1 second.
• Stainless steel 133 mm probe.
• Protective plastic sleeve with clip for stainless steel.
• Battery operated with low battery indicator.

SCT-108.001.32 SCT-THER-PEN-3 Waterproof Digital Pocket Multi-Stem Thermometer by ScichemTech

Features:

• Reliable SCT - Waterproof Tester for Temperature measurement.
• Good - Temperature - max/min range.
• Option to select °F/°C.
• Option to select test / hold date.
• Sensing time 1 second.
• Stainless steel 133 mm probe.
• Protective plastic sleeve with clip for stainless steel.
• Battery operated with low battery indicator.

SCT-108.001.34 SCT-THER-PEN-5 Foldable Thermo with 10 Memories Moving Head by ScichemTech

Features:

• Reliable SCT Folding Meter for Temperature Measurements.
• Ergonomic design - Head moving option.
• Sensing time 1 second for on / off operation.
• Option to select °F/°C .
• Max. / Min. memory recalling.
• Auto shut-off.
• Stainless Steel Probe - 133 mm.
• Option to select - hold / test data.
• Battery operated with Low Battery Indicator.

SCT-108.001.35 SCT-THER-PEN-6 Waterproof LCD Digital Multi-Thermometer by ScichemTech

Features:

• Reliable SCT Multi-Tester for Temperature Measurements.
• Protective plastic cap for stainless steel probe, pocket clip, stand on back unit and sensor wire compartment
• Sensing time 1 second for on / off operation.
• Option to select °F/°C.
• Max. / Min. memory recalling.
• Auto shut-off.
• Stainless Steel Probe - 133 mm.
• Option to select - hold / test data.
• Battery operated with Low Battery Indicator.

SCT-108.001.37 SCT-AIR-PEN-1 LCD Digital Air Pressure Meter by ScichemTech

Features:

• Reliable SCT Tester for Air Pressure, Altitude and Temperature Measurements.
• Clock with timer / alarm setting.
• Air Pressure & Altitude Display with Barograph.
• Graphic Display for weather forecast.
• Time, Display / Date.
• Battery operated with Low Battery Indicator.

SCT-108.001.38 SCT-VOLT-PEN-1 Pocket Voltage Detector by ScichemTech

Features:

• Reliable SCT - Unique Tester for Voltage Measurements.
• AC Voltage Deduction from 90V to 600V.
• Non-conduct deduction.
• Alarm / Red LED Voltage Indicator.
• Battery operated with low battery indicator.

SCT-108.002.01 SCT-AIRA Portable pH Meter by ScichemTech

Includes:

• Portable pH Meter
• Plastic pH/ATC Three-in-One combination Electrode
• pH standard buffer solution (pH4.00, pH7.00 and pH10.01/50ML)
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Automatic identification of 12 pH standard calibration solutions, three options of standard buffer solutions: Europe and American series and NIST series.
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Calibration solution and portable case and suited in field and on site.
• SCT meter meets ISO 9001:2000, CE standards and water proof IP57.

SCT-108.002.02 SCT-ALLY Portable ORP Meter by ScichemTech

Includes:

• Portable ORP Meter
• ORP Electrode
• Plastic ORP combination electrode
• 222MV ORP standard solution
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP measurements.
• Built-in microprocessor chips, intelligent functions such as data storage, function set-up, automatic power-off and low voltage display.
• Equipped with plastic ORP electrode, fast response and accurate result.
• Equipped with ORP standard solution and portable case.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.03 SCT-AVARI Portable Conductivity/TDS/Salinity/Resistivity Meter by ScichemTech

Includes:

• Portable Conductivity/TDS/Salinity/Resistivity Meter
• Plastic conductivity electrode
• 1413uS/CM conductivity standard solution
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for coductivity measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, automatic power-off and low voltage display.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Plastic conductivity electrode with automatic temperature compensation, fast response and accurate result.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.04 SCT-BEA DO Meter by ScichemTech

Includes:

• DO Meter
• DO electrode
• Membrane cap (DO electrode use)
• DO electrode inner solution cathode polishing paper
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for dissolved oxygen measurements.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, data storage, function set-up, automatic power-off and low voltage display.
• Combined diaphragm cap, replaceable sensitive membrane, screw new diaphragm cap to electrode, easy to use.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.05 SCT-BUCK Portable pH/ORP/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic ORP combined electrode
• pH standard buffer solution,220mv ORP
• Standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable sct meter for pH & ORP measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration,automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Double-parameter meter, equipped with three-in-one combination ph electrode and ORP electrode, automatic identification of electrode by meter.
• Automatic identification of 12 ph standard calibration solutions, three options of standard buffer solutions: europe, america series &nist series.
• Able to set pH measurement modes of high purity water and pure water with ammonia
• Sct meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.06 SCT-BONO Portable pH/Conductivity/TDS/Salinity/Resistivity Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic conductivity electrode
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT meter for pH, conductivity / TDS / salinity / resistivity Measurements.
• Double-parameter meter, equipped with pH electrode and conductivity electrode, Automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, Automatic temperature compensation, data storage, function set-up, self-diagnose Information, automatic power-off and low voltage display.
• Automatic identification of 12 pH standard buffer solutions, three options of Standard buffer solutions: Europe and America series & NIST series
• Able to set pH measurement modes of high purity water and pure water with Ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two Options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode Of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full Scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.07 SCT-BUD Portable pH/ORP/DO Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Do electrode
• pH standard buffer solution
• Membrane cap
• Do electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case.

Features:

• A complete portable SCT-meter for pH, ORP and dissolved oxygen measuements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Double-parameter meter, equipped with ph electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Automatic identification of 12 pH standard buffer solutions, three options of Standard buffer solutions: Europe and America series & nist series.
• Able to set pH measurement modes of high purity water and pure water with Ammonia.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, ce standards and water proof IP57.

SCT-108.002.08 SCT CADE Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic conductivity electrode
• DO electrode
• 1413us/cm conductivity standard solution
• Membrane cap (DO electrode use)
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for conductivity and dissolved oxygen measurements.
• Double-parameter meter equipped with conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, automatic power-off and low voltage display.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.09 SCT CADY pH/ORP/Conductivity/TDS/Salinity/Resistivity/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic ORP combined electrode
• Plastic conductivity electrode
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for ph, ORP and conductivity measurements.
• Multi-parameter meter, equipped with ph electrode, ORP electrode and conductivity electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function setup, self-diagnose information, automatic power-off and low voltage display.
• Automatic identification of 12 ph standard buffer solutions, three options of standard buffer solutions: Europe and America series & nist series
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.10 SCT DAVY pH/ORP/Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic conductivity electrode
• DO electrode
• pH standard buffer solution
• 1413 us/cm conductivity standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP, conductivity/TDS/salinity/resistivity/dissolved oxygen and temp. measurements.
• Multi-parameter meter, equipped with pH electrode, conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Automatic identification of 12 pH standard buffer solutions, three options of standard buffer solutions: Europe and America series & nist series.
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.11 SCT DEON pH/ORP/Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combination electrode
• Plastic ORP combination electrode
• Plastic conductivity electrode
• DO electrode
z
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Membrane cap
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP, conductivity and dissolved oxygen measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Multi-parameter meter, equipped with pH electrode, ORP electrode, conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Automatic identification of 12 pH standard calibration solutions, three options of standard buffer solutions: Europe and America series & nist series
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.12 SCT CHRIS Water Hardness Meter by ScichemTech

Includes:

• Water hardness electrode (with two measuring heads and one screw plug)
• Cell (1.5v)
• 100ml hardness calibration solution (B1, B2 and B3)
• 20ml test cup
• Test cup pedestal
• Reference solution
• Tools for filling reference solution
• Carrying case
• Operation manual

Features:

• A complete portable SCT-meter for calcium and magnesium, ions hardness measurements.
• Portable meter for measurement of water hardness (the total concentration of calcium ion and magnesium ion).
• Electrode adopts water hardness combination electrode with patent structure. It consists of measurement electrode, reference electrode and temperature probe. Replaceable measuring head, steady potential, fast response, easy to use.
• Meter adopts intelligent chip design, automatic calibration, automatic temperature compensation, time display, data storage, low voltage display, etc.
• Ability to switch among eight units: MMOL/L, MG/L (CACO3), MG/L (CAO), MMOL/L (Boiler), MG/L (CA). Three options of three units: ºFH France ºDH Germany and ºEH, UK from WH-link communication software.
• Equipped with B1, B2 and B3 calibration solution.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.21 SCT LILIAN Thermo Hygro Meter by ScichemTech

Includes:

• Temperature
• RH Probe
• Battery
• Carrying Case

Features:

• A complete portable SCT meter for relative humidity and temperature measurements.
• Microprocessor based for fast and accurate measurements.
• Simultaneous display humidity and temperature - user friendly
• Multi-function for data-hold, max/min, auto/manual power shut off.
• With 220 mm probe - detachable.
• Complete humidity range 0 - 100%.
• Battery operated with optional a/c.

SCT-108.002.22 SCT LARK Thermo Hygro Meter by ScichemTech

Includes:

• Temperature
• RH Probe
• Battery
• Carrying Case

Features:

• A complete portable SCT meter for relative humidity and temperature measurements.
• Ergonomic design, lightweight and compact.
• Microprocessor based for fast and accurate measurements.
• Simultaneous display humidity and temperature user friendly.
• Multi-functions: data-hold, max/min, record, hi & low alarm setting.
• Auto/manual power shut off.
• Fixed built-in probe
• Battery operated with low battery indication.

SCT-108.002.25 SCT LUCKY Lux Meter by ScichemTech

Includes:

• Battery
• Carrying Case

Features:

• A complete portable SCT meter for intensity of light measurements.
• Good design with high precision.
• Measuring intensities of illumination in lux or foot candles.
• Measuring lights source includes all visible.
• Multi-function for data hold, max. And zero adjustment.
• Cosine angular corrected.
• Battery operated.