Digi-Sense, Test and Measurement

WD-20250-14 CFM/CMM Vane Thermoanemometer with NIST Traceable Calibration by Digi-Sense

The Digi-Sense CFM/CMM Vane Thermoanemometer (Model 20250-14) measures air velocity, airflow (volume), and temperature. The large, easy-to-read backlit LCD includes primary and secondary displays plus numerous status indicators. The meter features 2 memory locations (1 for CFM and 1 for CMM) to store and recall commonly used area sizes. The instrument is fully tested and calibrated to NIST-traceable standards. Careful use of this meter will provide years of reliable service.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• User-selectable units of measure eliminate the need for conversion
• Measure air velocities up to 5900 ft/min (30 m/s) to cover a broad range of applications
• Measure air flow up to 999,900 CFM, 999,900 CMM
• Two memory locations, one CFM and one CMM, store commonly used vent area sizes to save you time
• Large dual-function 4-digit LCD with backlight for easy reading
• Auto power-off extends battery life
• Fits comfortably in your hand

Includes

Vane probe sensor with 3.9-ft (1.2-m) cable, three AAA batteries, and NIST-traceable calibration report with data supplied by InnoCal.

WD-20250-24 Infrared Wand by Digi-Sense

The Digi-Sense Infrared Temperature Wand (Model 20250-24) is a noncontact measurement accessory to be used with the Digi-Sense Professional series of thermocouple thermometers (models 20250-17, -18, -19, -20).

WD-20250-15 Professional Vane Thermoanemometer with CFM/CMM and NIST Traceable Calibration by Digi-Sense

This thermoanemometer provides precision air velocity and airflow measurements, ideal for helping you meet cooling and environmental requirements. Large dual display for simultaneously reading of air velocity or airflow and air temperature.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• User-selectable units of measure of ft/min, m/s, mph, km/h, knots, CFM, and CMM
• Measure air velocities up to 5900 ft/min (30 m/s)
• Measure airflow up to 999,900 CFM (999,900 CMM)
• Large dual-function 4-digit LCD with backlight for easy reading in dimly lit conditions
• Auto power-off extends battery life
• Intuitive operation with easy access to temperature and airflow functionality
• Measure air velocity and temperature in single point or averaging mode to best fit the application

Applications

• Analyze, balance, and troubleshoot ventilation performance in protected storage areas, home, and office environments
• Assess cooling air volume in temperature-controlled processing environments
• Measure outdoor wind velocities

Includes

Vane probe sensor with 3.9-ft (120-cm) cable, hard carrying case, one 9 V battery, and NIST-traceable certificate with data and uncertainties.

WD-20250-18 Professional Single Input Thermocouple Thermometer and NIST Traceable Calibration by Digi-Sense

Handheld thermocouple thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlight LCD for easy viewing in dimly lit conditions
• Minimum, maximum, and average readings, plus data Hold function
• Display of temp differential (except model 20250-01)
• Relative time clock on Min/Max/Avg provides a time reference for major events
• Electronic offset function allows compensation of probe errors to maximize overall accuracy
• User-selectable readout in °C, °F, or Kelvin (K) with 0.1 resolution
• Simple, intuitive setup and operation
• Auto power-off mode extends battery life
• Ergonomic design fits comfortably in your hand
• Data logging models available
• Accept a wide variety of thermocouple probes
• Infrared input port allows safe, noncontact measurements with optional IR wand
• Heavy-duty construction withstands knocks and jars
• Scan function for continuous reading in real time (except model 20250-18)
• Data logging software features graphing function

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

37803-83 Traceable® Digital Thermohygrometer with Dew Point and Calibration by Digi-Sense

The meter warns you of environmental conditions that are out of a desired range with an audible alarm and bright red LED indicator. Features include a super-large, triple display for relative humidity, temperature, and dew point; min/max with reset function; and switchable °F/°C units.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Monitors relative humidity, temperature, and dew point
• Sound and light alarm activates when humidity level exceeds three presets

Includes

Built-in desktop stand, wall-mounting bracket and hardware, NIST-traceable calibration certificate with data, and two AA batteries.

18527-13 Miniature Type-K Thermocouple Male Connector, 2 Pin by Digi-Sense

• Molded barriers prevent short circuit and the solid pin design ensures good contact even in demanding applications
• Miniature connectors are suited for small wires and mineral insulated cables
• Connector-body color is brown, calibration type (J or K) is printed on the body

08491-15 Epo x y-Encapsulated Thermistor Element, 32 Gauge Copper, 3" Bare by Digi-Sense

Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Probes are electronically isolated and come with a 10ft lead with a ¼" phono plug (unless otherwise specified).
• Probes are designed for multiple applications.
• Epoxy coated probes can be used in liquid immersions.
• Time Constant: 1-4 seconds or greater
• Custom designs or changes to this product are available upon request

WD-20250-05 12:1 IR Thermometer with Temperature Alarm and NIST Traceable Calibration by Digi-Sense

Ergonomic pistol-grip infrared (IR) thermometers provide the precision you need for quick and easy temperature measurements. Noncontact meters safely measure the surface temperature of objects without physically touching the object. Simply aim, pull the trigger, and read the display—reliable measurements couldn't be easier!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Laser sighting helps target the measuring area
• Large backlight LCD with backlight for easy viewing
• Adjustable emissivity (except model 20250-04)
• Min/Max readings and data Hold function
• User-selectable temperature readout in °C or °F
• Automatic selection range and display resolution
• Trigger lock for continuous scanning of temperatures
• Auto power-off mode extends battery life

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

WD-20250-11 Thermohygrometer with NIST Traceable Calibration by Digi-Sense

Ergonomic handheld thermohygrometers provide a fast and convenient way to accurately spot-check relative humidity and temperature in a wide range of environments and applications. When accuracy is a must in the field, in the lab, or on the process floor, these meters deliver dependable results every time!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlit LCD displays humidity, temperature, dew point, and wet bulb readings
• Feature Min/Max readings and Hold function
• User-selectable temperature readout in °C or °F
• Integrated humidity and thermistor (NTC) temperature sensor
• Auto power-off mode extends battery life
• Absolute humidity measurements

Applications

• HVAC
• Industrial
• Food industry
• Educational
• Laboratory
• R&D

WD-20250-04 10:1 Infrared Thermometer and NIST Traceable Calibration by Digi-Sense

Ergonomic pistol-grip infrared (IR) thermometers provide the precision you need for quick and easy temperature measurements. Noncontact meters safely measure the surface temperature of objects without physically touching the object. Simply aim, pull the trigger, and read the display—reliable measurements couldn't be easier!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Laser sighting helps target the measuring area
• Large backlight LCD with backlight for easy viewing
• Adjustable emissivity (except model 20250-04)
• Min/Max readings and data Hold function
• User-selectable temperature readout in °C or °F
• Automatic selection range and display resolution
• Trigger lock for continuous scanning of temperatures
• Auto power-off mode extends battery life

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

WD-20250-09 8:1 Infrared Stick Thermometer with NIST Traceable Calibration by Digi-Sense

These innovative handheld infrared (IR) thermometers deliver precise measurements, quickly and easily, without physically touching the object. Simply aim, push the button, and read—reliable measurements couldn't be any easier!

Features

• Water- and dust-resistant IP54 rating
• Single targeting laser
• Fixed emissivity
• Automatic data Hold
• Backlit display
• User-selectable readout in °F or °CF
• Auto power-off extends battery life
• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Distance-to-sight ratio of 8:1
• Temperature range: 0 to 575°F ( 18 to 302°C)
• ±2% basic accuracy

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

Includes

One 9 V battery. Model 20250-09 also includes a NIST-traceable certificate with data and uncertainties.

WD-20250-13 Pressure and Flow Meter with NIST-Traceable Calibration by Digi-Sense

Ideal tool for helping HVAC field technicians determine the performance of heating and cooling systems. This handheld meter measures differential and static pressure, and calculates air velocity and flow. Meters are heavy duty, easily configurable, and feature a large backlit LCD. View measurement data in graphical formats as well as record and download data with included software for further analysis.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Displays pressure, air velocity, and airflow plus environmental temperature
• Relative time clock on Max/Min/Avg readings provides a time reference for major events
• Save and recall up to 99 sample readings per parameter
• Data logging software with graphical display provides quick and simple data interpretation
• USB connectivity allows downloading of data to PC
• Large backlit LCD for clear reading in dimly lit environments
• Auto power-off extends battery life

Applications

• Evaluating duct performance and proper airflow
• Inspecting air filtration
• Monitoring HVAC operation in factories and warehouses
• Ensuring safe working conditions in office buildings and schools
• Adjusting motor speeds in HVAC systems

Includes

Pitot tube with two rubber hoses, USB cable, software CD, hard carrying case, battery, and NIST-traceable certificate with data and uncertainties.

94411-01 Traceable® Continuous Visual Alarm Timer with Calibration by Digi-Sense

With a flip of a switch this innovative timer has a selectable bright flashing LED visual alarm or audible alarm. Ideal for noisy environments. Timer counts down from 9999 minutes in minute increments. Automatic memory resets the display to the last programmed time for repetitive tests.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Two AAA batteries and NIST-traceable calibration certificate with data.

WD-20250-02 2 Input Data Logging Thermocouple Thermometer, Type K/J with NIST Traceable Calibration by Digi-Sense

Handheld thermocouple thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlight LCD for easy viewing in dimly lit conditions
• Minimum, maximum, and average readings, plus data Hold function
• Display of temp differential (except model 20250-01)
• Relative time clock on Min/Max/Avg provides a time reference for major events
• Electronic offset function allows compensation of probe errors to maximize overall accuracy
• User-selectable readout in °C, °F, or Kelvin (K) with 0.1 resolution
• Simple, intuitive setup and operation
• Auto power-off mode extends battery life
• Ergonomic design fits comfortably in your hand
• Data logging models available
• Accept a wide variety of thermocouple probes

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

98766-79 Traceable Waterproof/Steamproof Timer with Calibration by Digi-Sense

This water-resistant timer features easy, three-button operation for error-free programing. Count down from 99 min, 59 sec on the easy-to-read LCD; alarm sounds when timer reaches zero. Count up to 99 min, 59 sec or continuously; timer rolls over again from zero at end of period. Press START/STOP button at any point during a run to trigger time-out and time-in. Suction cup on back may be removed, or used to stick on instruments, walls, shelves, hoods - any flat surface. Flip-out stand allows for placement on a bench.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Use in washdown and humid areas - timer is water-resistant and steamproof
• View from up to 20 feet away - large-digit display

Includes

Stand, removable suction-cup, one 1.5 V button cell battery, and NIST-traceable calibration certificate with data.

18527-58 Dual Thermocouple Connector, Standard, Male, Type-J; 1/ea by Digi-Sense

• Glass-filled nylon construction with molded barriers to prevent short circuit
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue

94461-24 Traceable® Magnetic/Clip-on Alarm Timer with Calibration by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Timing capacity up to 20 hours in 1 minute increments
• Alarm sounds for 1 minute when zero is reached

Includes

NIST-traceable calibration certificate with data and one AAA battery.

90308-60 Irreversible 4-Point Horizontal Temperature Label, 261-289F/127-143C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

WD-20250-95 RTD Thermometer, NIST-Traceable Calibration by Digi-Sense

The Digi-Sense Professional Single-Input Thermometers offer fast response and laboratory accuracy. Features include automatic backlight, Max/Min readings, and automatic power-off. These thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications. Robust and reliable constructed to protects against knocks and jars. These thermometers produce a high degree of accuracy, with a rapid response time, and exceptional battery life of up to 3000 hours.

Digi-Sense instrument are fully tested and calibrated to NIST-traceable standards, saving you hundreds of dollars and extra waiting time to calibrate separately.

Key Features

• Reliable measurements, guaranteed!
• NIST-traceable certificate included
• Heavy duty construction to protect against knocks and jars.
• Super lager LCD for easy viewing of data
• Accepts a wide variety of probes
• Min, Max, and Avg readings, for quick analysis of the object
• Electronic Offset function allows compensation of probe errors

Includes

Protective rubber armor boot with built-in stand, one 9 V battery, and NIST-traceable calibration report with data supplied by InnoCal. Data logging models 20250-92, -94, and -96 also include a USB cable and software.

08080-73 Stainless Steel Bimetal Pocket Thermometer, 1" Dial, Poly Lens, 8" Stem, -10-110C, 1C Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test, and a plastic storage sleeve with pocket clip

WD-20250-22 Data Logging USB Vane Anemometer with NIST Traceable Calibration by Digi-Sense

Operate as a handheld instrument or mount for flexible positioning. Takes and records precise air velocity measurements in seven user-selectable units. Easily download data to a PC for analysis and graphing. Use recorded data to enhance safety and comfort in your environment.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• User-selectable units of measurement: ft/min, m/s, mph, km/h, or knots
• Measure air velocities up to 3937 ft/min (20.0 m/s)
• Adjust sampling intervals from once every two seconds to once every 24 hours
• Two modes (manual and automatic) start data logging function
• Analyze and graph logged data
• Collect up to 32,000 readings in memory
• Visual LED alerts with selectable high and low alarm levels

Applications

• Measure and analyze component cooling air velocities
• Test and evaluate ventilation air velocities in working, living, and storage areas
• Analyze and troubleshoot ventilation performance
• Monitor outdoor wind velocities

Includes

Data analysis software on CD, articulated screw-on mounting stand, one 3.6 V replaceable battery, and NIST-traceable certificate with data and uncertainties.

WD-20250-06 20:1 IR Thermometer with Temperature Alarm and NIST Traceable Calibration by Digi-Sense

Ergonomic pistol-grip infrared (IR) thermometers provide the precision you need for quick and easy temperature measurements. Noncontact meters safely measure the surface temperature of objects without physically touching the object. Simply aim, pull the trigger, and read the display—reliable measurements couldn't be easier!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Laser sighting helps target the measuring area
• Large backlight LCD with backlight for easy viewing
• Adjustable emissivity (except model 20250-04)
• Min/Max readings and data Hold function
• User-selectable temperature readout in °C or °F
• Automatic selection range and display resolution
• Trigger lock for continuous scanning of temperatures
• Auto power-off mode extends battery life

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

WD-20250-00 Data Logging Light Meter with NIST Traceable Calibration by Digi-Sense

Designed for precision light intensity measurements indoors and out. Ensures safety and quality control requirements are met while increasing comfort levels and productivity. View measurement data in graphical formats as well as record and download data with included software for further analysis.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Expanded range of 0 to 400 kLux/0 to 40 kFc meets a wide range of application requirements
• Silicon photo diode with spectral response filter ensures precision accuracy of ±3%
• User-selectable Lux or Fc units for additional flexibility
• Max/Min and Hold functions let you easily control measurement readings
• Record up to 87,000 measurements for expanded data analysis capability
• Data logging software with graphical display provides quick and simple data interpretation
• USB connectivity allows downloading of data to PC
• Large backlit LCD for easy reading in dimly lit environments
• Auto power-off extends battery life

Applications

• Measure visible light from fluorescent, metal halide, high pressure sodium, or incandescent sources
• Monitor light levels for safe working conditions in factories, warehouses, office buildings, and schools
• Light source manufacturers: light intensity in R&D, design, production, QA/QC, installation, and field verification
• Perform outdoor commercial and residential lighting evaluations
• Measure roadway/sign/search lighting to ensure code compliance
• Light intensity control for photo studios, scenic design and cinematography

Includes

USB cable, software CD, canvas carrying case, three AAA batteries, and NIST-traceable certificate with data and uncertainties

WD-20250-21 Professional Thermohygrometer with NIST Traceable Calibration by Digi-Sense

Ergonomic handheld thermohygrometers provide a fast and convenient way to accurately spot-check relative humidity and temperature in a wide range of environments and applications. When accuracy is a must in the field, in the lab, or on the process floor, these meters deliver dependable results every time!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlit LCD displays humidity, temperature, dew point, and wet bulb readings
• Feature Min/Max readings and Hold function
• User-selectable temperature readout in °C or °F
• Integrated humidity and thermistor (NTC) temperature sensor
• Auto power-off mode extends battery life
• Heavy-duty housing protects against knocks and jars
• Absolute humidity measurements

Applications

• HVAC
• Industrial
• Food industry
• Educational
• Laboratory
• R&D