$300 - $400, Test and Measurement

3676 1/4 DIN Panel Mount pH/ORP Controller/Transmitter by Jenco

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large bright red LED display. Connectors are a BNC input and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or temp. simulation resistor. Power 115/230V AC.

• Isolated 4 to 20 mA output
• Dual on/off relays
• Large led display
• ATC
• 115VAC /230VAC operations
• Compact 1/4 DIN case
• Low power solid state design
• Front panel output current span adjustable control
• Front panel acid/base influent select switch
• Front panel high/low relay format select switch

512M5 DS Conductivity Meter: 0-5000 AμM/AμS by Myron L

READINGS YOU CAN COUNT ON

No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life.

Myron L Company has two proven ways to measure such impurities. Our DS Meters provide fast, accurate, on-the-spot measurement of total dissolved solids (TDS) or conductivity. pDS Meters test conductivity or TDS, plus pH. Readings from their highly stable circuitry help prevent equipment damage, assure product quality, and verify in-line instrumentation in a wide range of applications.

RELIABILITY BUILT IN

Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The userreplaceable pH electrode features a chemical resistant, liquid junction.

UNIQUE FIELD-TESTED DESIGN

Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world.

They're lightweight and compact, Yet Myron L's DS and pDS Meters are also tough, with rugged, taut-band meter movements.

Put our meters to the test. Even after years of rough field service, they'll surpass your expectations of accurate, reliable readings.

APPLICATIONS

• Boilers
• Cooling towers
• Deionization
• Reverse osmosis
• Chemical concentrations
• Printing fountain solutions
• Swimming pools
• Water pollution control
• Wastewater

Sentry EC Personal Alarming Dosimeter and Rate Meter by SE International

The Radiation Alert® Sentry EC is a Personal Alarming Dosimeter / Ratemeter designed to ensure the safety of personnel that work in occupations with potential x-ray or gamma exposure.

The pocket sized unit has an energy compensated tube for a linear response to gamma and built in memory for recording data points for tracking accumulated exposure. The SentryCom Software option enables you to generate incident reconstruction for analysis. The software also permits you to easily set the vibrating and audio alert to your desired levels for dose and dose rate.

Use the audio switch to choose between audible clicks with each count recieved or a discreet silent mode.

SentryCom Software

The SentryCom Software comes complete with mini-USB cable.

NOTE: Some older operating systems require access to Windows Update to download the standard USB-Serial drivers to connect to the Sentry EC with the provided USB cable.

0563 2701 270 Cooking Oil Tester by Testo

The testo 230 combines a complete pH measuring instrument and a full-value temperature measuring instrument in one compact splashproof housing. It reliably records pH values, reduction voltages and temperature in watery solutions as well as in semi-solid to solid media.

The instrument has an automatic temperature compensation, and can be calibrated with standard as well as DIN buffers in the pH area. Thanks to the possibility of connecting different pH probes, the testo 230 is universally applicable, not only for applications in the pharmaceutical industry, but also in the food sector and the field of HVAC.

• Measurement of pH and temperature in one instrument
• Display of calibration data and error reports
• Robust and splashproof according to protection class IP54
• Easily legible, 2-line display
• 1, 2, or 3-point calibration possible

RT10-1047 Algiz RT10 Pole Mount for 1 and 1.25 inch poles, compass, 40min via by Handheld

Pole mount with fully adjustable RAM arm and ball for the Algiz RT10. Suitable for 1- and 1.25-inch poles.

Features

• Compass
• 40min vial
• AMPS hole pattern

Compatibility

• Algiz RT10

SCT-108.005.15 SCT-EC-MAXI - HR Conductivity Maxi Controller by ScichemTech

Includes:

• Conductivity sensor
• Fixation clamps
• Calibration Solution
• Instruction manual

Features:

• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable.(new series). 3 ranges of EC can be adjusted in a single controller and the ranges can be switched easily.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS has an isolated 4-20 mA current output.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS proved to work continuously in any harsh environmental conditions for the inline measurement and control of accurate EC value and it give the direct measurement and readings.

ViTiny Pro10 Plus Portable Digital Microscope by Oasis Scientific

Discover the Micro world with this newest innovation from ViTiny! PRO10 Plus is one of the lightest, most powerful and compact mobile microscopes in the world today. This palm-size microscope does not require any additional monitors to view subjects, giving the freedom to take it anywhere you need magnification. The unique PRO10 Plus with its full color display allows you to view images in high magnification, take standard photos, record videos, and output on a PC or TV. It can also be used as a web camera. With 10x magnification, the view range is 6mm x 4mm on 2.8" LCD screen. Pro10 Plus includes a set of 5 support accessories to help examine soft materials, fragile items, larger or smaller objects. Eight bright built-in LEDs have multi-lighting functions, allowing you to choose different direction illumination to observe the different surface texture with the optimum illumination. The included software has powerful measurement function to measure length, perimeter, angle, and area of objects.

• Educational Research: biological sample, living creature, reading
• Quality Checking: material (textile inspection), detailed repair, metal surface (soldering check), jewelry, printing
• Electronic Checking: PC board inspection, SMT pattern
• Medical Observation: bone tissue examination
• Health Care: skin & hair observation
• Anti-counterfeit Operations: false label, forged money

Product Details:

• Dimension (microscope): 129 (L) x 67 (W) x 28 (H) mm (5.1 x 2.6 x 1.1 )
• Weight: 180g (6.1 oz) including battery and set of 5 support accessories
• Software Compatibility: Windows 7/Vista/XP
• Accessories Included: Set of 5 Support Accessories (shallow contact cap, deep contact cap, non-contact supporter, deep tank, shallow tank), USB 1.1 Transmission Line, USB Power Supply Device, AV Terminal Transmission Line, 2GB Micro SD Card, Rechargeable Lithium Battery, Instruction Manual, Installation CD, Protection Bag, Cleaning Cloth, Wrist Strap
• Manufacturer s Warranty: 1 year

Technical Details:

• Magnification: 10x to 200x
• Optical zoom: 10x to 40x
• Digital zoom: 5x
• Built in 2.8" full color TFT LCD screen: 320 x 240 pixels for preview
• Digital Camera: 2M pixels
• Photo Resolution: 1600 x 1200 pixels, JPG file
• Video Resolution: 640 x 480 pixels, AVI file; 320 x 240 pixels, MP4 file
• TV Image Output: MP4 file
• Web CAM Function
• USB Cable: 1.1 speed for transferring images to a PC
• AC Adapter: 100-240 Volt, 50/60 Hz for world-wide power requirement
• Multi-LED Lighting Function: adjustment of light source from different direction
• Special Effects: Grey Scale, Inverse, and Embossed
• Measurement Function: measurement of length, perimeter, area, angle, etc.
• 32MB internal Flash memory for saving images
• Micro SD Card Slot: optional cards used up to 2GB
• Shallow Contact Cap (1): to examine soft materials such as cloth, paper, hair, skin, etc.
• Deep Contact Cap (2): to observe coins, screws, SMT Components, etc.
• Non-Contact Supporter (3 ): to examine fragile items such as Printed Circuit Boards, flowers, wounds, insects, etc.
• Deep Tank (4): to observe larger objects such as flies, rocks, etc.
• Shallow Tank (5): to study smaller objects such as fish eggs, spores, sand, droplets, diamonds, etc.

6177KA Benchtop pH Meter Kit by Jenco

Kit Includes:

• 6177 - Benchtop pH/Mv (ORP)/Temp Meter
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230AST - Stainless Steel, 10k Ω Thermistor, 8-Pin Din Connector
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series pH/ORP/temperature benchtop pH meter is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop pH Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• up to 5 Point calibration (pH); 1 Point calibration (mV)
• Non-volatile memory holds up to 750 data points
• Simple calibration with automatic buffer recognition of US and European buffers
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mv/temp pH meter uses a standard BNC connector so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP probes
• 8-Pin DIN for temperature probe (6177M)
• 2.5 mm phone jack for temperature probe (6177EU)
• Optional, detached electrode arm

WD-91428-00 Temp10 Single-Input Type J Thermocouple Thermometer by Digi-Sense

These robust and reliable meters work in any environment from the lab to the production floor. The sturdy armored construction protects against knocks and jars. All models are ergonomically designed for both large and small hands alike. The sealed keypad and ABS plastic case meet IP54 standards for splash resistance. Select from the three most popular thermocouple types-J, K, or T to meet all your basic temperature measurement needs.

Features include a large, easy-to-read illuminated display; an easy-to-use five button control panel; Min/Max and Hold functions; °F/°C selection; auto shutoff; and low-battery indicator. Each thermometer is individually factory calibrated. Automatic field calibration is easily performed: simply place the probe in a container packed with ice, fill with water, then press the "CAL" button meter automatically recognizes the freezing point.

Digi-Sense's exclusive "3-WAY HANDS-FREE" capability allows "hands-free" use use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meters come standard with the integral stand; the "hands-free" option adds magnets and strap (order separately).

Includes

Protective rubber armor/boot with stand and three AA batteries.

Key Features

• 3-way hands-free operation available
• Large easy-to-read screen with back light
• Rugged armor with built-in stand withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings
• Probes are sold separately

0563 1550 550 Digital Manifold Kit with Bluetooth by Testo

The App integration via Bluetooth opens up new possibilities for efficient analysis and documentation. You can read the data on a Smartphone or Tablet, allowing for more work quickly and conveniently. In addition to this, the user can finalize and send the measurement report directly on site. The App allows the list of stored refrigerants to be updated, via the internet.

The more rugged housing includes a metal frame around the display which protects the new testo 550 from impact. Now with 60 refrigerant profiles and added functionality of leak tests, Testo manifolds are versatile enough to be the tool for every job.

Includes:

• 550 Digital Manifold with Bluetooth
• 0613 5505 - Two (2) 4.9 ft Clamp Probes (NTC)
• 0516 0012 - Hard carry case
• Certificate of Conformity

• Measures high side / low side pressures and temperatures
• Accurate, simultaneous super heat/subcooling in real time
• App integration via Bluetooth for monitoring and reporting
• 60 refrigerant profiles onboard
• Refrigerant updates in the instrument via App
• 2-way valve block with three connections, large, 2-line backlit display
• 5 year warranty with registration

98767-13 Traceable® Sound Level Meter with Calibration by Digi-Sense

This digital sound level meter covers a wide sound level range at frequencies of 30 Hz to 12 KHz. Calibrate meter using 94 dB, 1000 Hz internal reference with push-button ease. Large 0.7-inch, 3.5-digit LCD is easy to read.

Choose from impulse (0.035 second), fast (0.2 second), or slow (1.5 second) response times for accurate peak and average sound levels. Use the tripod mount on the back for extended monitoring. Obtain the highest reading observed by using the Max Hold button. Use 3-pole 3.5-m stereo phone plug (not supplied) to access meter's AC and log-converted DC signal outputs.

Compliance: ANSI S1.4: type 2; IEC 61672-1 Class 2

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Obtain A or C weighted readings
• Two ranges cover a sound levels from 35 to 130 dB
• Max Hold feature updates display each time a new higher dB reading is measured

Includes

microphone windscreen, carrying case, battery, and NIST-traceable calibration certificate with data.

6313 Single Parameter pH or ORP Controller, 2-Relays, IP-65 Case, RS-485 by Jenco

• Clear LCD displays pH or mV, with temperature and relay status simultaneously.
• Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
• Displays absolute and relative ORP.
• Isolated and reversible 4-20 mA current output for pH or ORP allows it to be used as a proportional output.
• 2 programmable on/off relays: 2 for pH or ORP.
• CE Approved
• Password protection.
• IP65

WD-20250-16 Hot Wire Thermoanemometer with NIST Traceable Calibration by Digi-Sense

Achieve precise air velocity and airflow measurements with this rugged hot-wire anemometer. Maximize performance for safety and comfort by analyzing and storing measurements for future review. Read air velocity or airflow, and temperature simultaneously on the large LCD, in nine user-selectable units of measurement.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Slim, telescoping hot-wire probe is ideal for grilles and diffusers
• User-selectable units of air measurement: ft/min, m/s, mph, km/h, knots, CFM, and CMM
• Measure air velocities up to 4925 ft/min (25 m/s)
• Measure airflow up to 99,999 CFM (99,999 CMM)
• Large, dual-function LCD with backlight for easy reading in low-light conditions
• Auto power-off extends battery life
• Download measurements into a PC for analysis and storage with the software and USB cable (included)

Features

• Analyze, balance, and troubleshoot ventilation performance in protected storage areas, home, and office environments
• Evaluate cooling air in high-temperature processing environments
• Perform environmental testing
• Measure and validate air conveyors, blowers, motors, furnace exhaust, flow hoods, cleanrooms, and paint spray booths

Includes

Telescoping hot-wire probe sensor with cable, USB cable, software CD, hard carrying case, AC/DC power adapter, one 9 V battery, and NIST-traceable certificate with data and uncertainties.

WD-20250-07 30:1 IR Thermometer with T/C Input and NIST Traceable Calibration by Digi-Sense

Ergonomic pistol-grip infrared (IR) thermometers provide the precision you need for quick and easy temperature measurements. Noncontact meters safely measure the surface temperature of objects without physically touching the object. Simply aim, pull the trigger, and read the display—reliable measurements couldn't be easier!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Laser sighting helps target the measuring area
• Large backlight LCD with backlight for easy viewing
• Adjustable emissivity (except model 20250-04)
• Min/Max readings and data Hold function
• User-selectable temperature readout in °C or °F
• Automatic selection range and display resolution
• Trigger lock for continuous scanning of temperatures
• Auto power-off mode extends battery life
• Dual-laser sighting to pinpoint target areas
• Higher distance-to-sight (D/S) ratios for long-distance measurements
• Extended temperature ranges
• Temperature differential and average readings
• USB interface for data transmission to PC
• Heavy-duty construction and protective lens cover
• External type K input for contact measurements
• Internal logging of 100 readings (model 20250-08 only)

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

SCT-108.002.40 SCT NASH CO₂ Detector - I by ScichemTech

Includes:

• User Manual
• Sleeve
• Carrying case
• 9V battery

Features:

• A complete portable SCT meter for carbon dioxide measurements.
• Large dual LCD display for co₂, % RH humidity and temperature.
• Precise adjustment in different barometric levels (or pressures).
• Co₂: 0 ~ 9,999 PPM range, diffusion sampling mode.
• Continuous data logging with time/date.
• Energy efficiency by sampling time modulation.
• Data hold & maximum/minimum with time stamp.
• USB power supply.
• Data memory and recall function.
• Easy to use USB interface and user friendly software.
• Fast warm up time/audible alarm.

SCT-108.003.01 SCT BEN-pH-01 pH Meter with RS232 by ScichemTech

SCT basic benchtop pH/ORP/Temp meter which is suitable for general pH measurement in laboratory consistent with the basic requirements.

Includes:

• Plastic pH combination electrode
• Standard solution pH 4.00, 7.00, 10.01 (50ml)
• 9V power adapter
• Operation manual

Features:

• SCT benchtop meter is designed to measure pH, ORP, temperature.
• Large LCD with blue background can display both pH and temperature value at the same time.
• It has intelligent functions for automatic calibration, data storage/ recall, and memory max. and min. value etc.
• 1~3 point automatic calibration and it can automatically display the percentage of slope after finishing calibration
• Equipped with manual temperature compensation
• Option to switch between °C/°F.
• SCT benchtop meter meets ISO9001:2008 & CE standards

WD-20250-29 Data Logging Sound Meter with NIST-Traceable Calibration by Digi-Sense

Get precision sound decibel measurements for product noise certification and reduction applications. Meter conforms to IEC61672-1 Class 2 standards.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Get added flexibility with four userselectable ranges from 30 to 130 dB
• Suits a wide range of applications with programmable sample rates and A and C weighting capabilities
• Memory expands up to 32,700 readings
• Easy analysis with data logging software featuring graphical display (included)
• Download data via USB to your PC for analysis later
• Ideal for field use tripod mountable
• Save battery life with auto power-of

Applications

• Ideal for OSHA and IEC surveys
• Facilities with industrial machinery or equipment
• Residential or commercial environments

Includes

Windscreen, 3.5-mm earphone plug, screwdriver, software, USB cable, batteries, and NIST-traceable certificate with data and uncertainties.