$100 - $150, Test and Measurement

765JC Thermocouple Panel Thermometer, Type J, Range -210 to 760 °C by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765PTBF Thermocouple Panel Thermometer, Type PTB, Range -58°F to 1562°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

ViTiny UM07 2.0MP Handheld USB Digital Borescope Endoscope Microscope with 8.2mm Tube Diameter by Oasis Scientific

Connect digital endoscope to your computer with USB cable included, and inspect small details right on your computer screen! With 2.0M pixels CMOS sensor, up to 270x magnification, and six built-in LEDs for illumination, this product allows you to view images in high resolution, take standard photos, record videos, and use as a webcam. It is easy to take snapshot by hardware button or by software control. The endoscope comes with an adjustable aluminum alloy stand, and a set of accessories (reflector tube, rubber sleeve, plastic sleeves) which can be attached to the endoscope for different inspection purposes. ViTiny UM07 is controlled directly with the advanced application software which is bundled with the microscope. This state-of-the art software enables users to capture, measure, store and view images and videos in real time. The endoscope is multi-functional. It can be used for inspecting hard-to-reach places such as the inside of engines, machines, tubing, pipes, etc. It is also ideal for a variety of applications including textile inspection, detailed repair, printing inspection, computer parts inspection, nature observation, reading aid, collectables examination (coins, antiques), and health (skin and ear) examination.

Product Details:

• Dimension: 8.2mm in tube diameter and 165mm in tube length
• Reflector Tube Diameter: 9.7mm
• Weight: 85g (2.9oz)
• Compatibility: Windows 7/Vista/XP, MAC OS x 10.8 or later (note: for MAC, use Photo Booth or Facetime to open it. No software for MAC at this time).
• Package Includes: USB Digital Endoscope (1x), Reflector Tube (1x), Rubber Sleeve (1x), Plastic Sleeves (2x), Software CD (1x), User s Manual (1x), Calibrator for Measurement Application (1x), and Adjustable Aluminum Alloy Stand (1x)
• Manufacturer s Warranty: 1 year

Technical Details:

• Lens & CMOS Sensor: 2.0M pixels
• Still Image Resolution: 1600X1200 pixels
• Still Image Format: JPG, BMP
• Video Resolution: 1600X1200 pixels
• Video Format: AVI
• Video Frame Rate: 30FPS
• Focal Distance: 5mm infinity (when focal distance is infinity, the microscope cannot magnify, but can be used as a webcam)
• Magnification: 5X - 270X (adjustable) on 22 monitor
• Illumination: 6 white LEDs with adjustable brightness
• PC Interface: USB 2.0
• USB Cable Length: 200cm
• Include Advanced Application Software
• Multi functions: Image comparison mode, Video control mode (left-right, up-down), Aiming aid
• Measurement Tools: Measure line, circle, ellipse, square, rectangle, area, angle, etc.
• Time lapse photography including image converting into video, video converting into image

0572 9001 Penetration Probe TC with Ribbon Cable, Type K, Cable Length 2 m, IP 54 by Testo

This thermocouple (TC) temperature probe with penetration tip can be used for measurements in pastes and semi-solid media and also for measurements in liquids and air.

The temperature probe features a thin, 2 m long ribbon cable. The thin ribbon cable can also be placed through narrow openings such as slits in doors or refrigerator seals.

Protection class IP 54 means that the temperature probe with penetration tip is protected against spray water.

This Type K, Class 1 thermocouple probe has a standardized accuracy of ±2.7 °F (±1.5 °C).

The temperature probe's response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 7 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*

The perfect probe for any application

Don't see the temperature probe you are looking for? Please contact us directly. We have a large range of standard temperature probes and we also manufacture customized probes specifically according to your personal requirements.

* For air temperature measurements, the response time is about 40 - 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use the temperature probe with penetration tip to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.

If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range.

• TC Type K temperature probe with exceptionally flat cable, which can be pushed through narrow openings, e.g. through slits in doors
• Temperature measurement in pastes and semi-solid media and also in liquids and air
• Measuring range: -40 to 428 °F (-40 to +220 °C)

Includes:

1 x TC Type K temperature probe with penetration tip 0572 9001, can be connected to the testo Saveris 2-T3 Wi-Fi data logger

TT960PS Adhesive Vinyl Class 9 Miscellaneous Products Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

TT220PS Adhesive Vinyl Class 2.2 Non-Flammable, Non-Toxic Gases Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

765KF Thermocouple Panel Thermometer, Type K, Range -157°F to 1999°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

SD50970 QuickChek Atrazine (10 test kit) Requires QuickChek Reader by Modern Water

Atrazine is one of the most widely used herbicides in the United States and Australia. Since 2001 it is the most commonly detected pesticide in drinking water supplies in the United States.

Why test for atrazine?

Many research studies have associated long term exposure to atrazine with being toxic to wildlife, impairing the human immune system and causing birth defects. The US Environmental Protection Agency (EPA) has acknowledged the harmful effects and has limited its use to only be applied by a pesticide professional, with the exception for lawn care, turf and conifer trees.

In 2013, 73.7 million pounds of the chemical compound was applied in the United States and was used on more than half of all corn crops and up to 90% of sugar cane. High levels of contamination in water have been found especially in the Midwest and Southern United States making the requirement for a quick test kit to measure the amount of atrazine in water essential.

How can QuickChek Atrazine help you?

QuickChek™ Atrazine strip test produces results in just 10 minutes using the rapid enzyme immunoassay strip method and is ideal for detecting atrazine in both drinking water and environmental water samples. It has excellent analytical precision with a detection range from just 0.75 ppb to 10 ppb.

This innovative technology saves operators and laboratories both time and resources when compared to costly analytical instrumentation that can take over an hour to achieve results. This enables plant operators to take faster corrective action when atrazine levels spike due to storm water runoff.

Basic Test Procedure

• Prepare sample
• Add contents of dropper pipet to reagent well of cassette
• Incubate for 10 minutes
• Insert cassette into strip reader
• Select 'Read sample'
• Record email results

Test kit components

• 10 strip tests
• Test kit instructions
• Dropper pipette

Four result categories

• Below detection level
• Less than 1.0 ppb
• Less than 3.0 ppb
• ≥3.0 ppb and ≤10.0 ppb and higher
• Higher than 10.0 ppb

Four result categories

• Below detection level
• Less than 1.0 ppb
• Less than 3.0 ppb
• ≥3.0 ppb and ≤10.0 ppb and higher
• Higher than 10.0 ppb

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging.

97610-50 LDM-35 Compact Handheld Laser Distance Meter by Digi-Sense

These laser distance meters are designed for high-accuracy measuring at an economical price. Compact size and simple-to-use push-button control with shortcut keys makes measuring fast and reliable.

• Measure up to 114 ft (35 m)
• Calculation of area (square footage) and volume
• Indirect measurement using Pythagoras calculation
• Continuous measurement
• Addition and subtraction of measurement
• Min/Max distance tracking
• Multiline and illuminated display

Includes

carrying case and batteries.

90000-27 Traceable Extreme-Accuracy Digital Thermometer with Calibration, 37.00°C; 1 Stainless Steel Probe by Digi-Sense

Four Traceable International Standards Digital thermometers provide the exact readings required for critical requirements, quality control checks, and routine measurements. Units read 0.00, 25.00, 37.00, or a combination of all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C of standard. Units read in °C and °F.

Stainless-steel probe supplied with units shows the slightest temperature change. Probe is triple purpose for liquid, air/gas, and semisolids. Accurate readings with tip penetration of 1/3-inch. Probe has a diameter of 1/8-inch, stem length of 6-1/4 inches, overall length of 9 inches and a cable length of 5 feet. Absolute high-precision thermometer is ideal for measuring temperatures in water baths, cuvettes, gas systems, reagents, standards solutions, ovens, incubators, pharmaceuticals, petroleum products, foods, and wastewater. The display shows minimum/maximum and current temperatures. MIN/MAX monitors readings overnight, on weekends, or for any time period and displays the exact time and date when the MIN/MAX temperature occurred. Alarm provides two visual (LEDs) and two audio alerts when temperature rises above or falls below high and low set points. Unit displays the exact time and date when dual thermometer alarms are triggered. Alarms are programmable in 0.1° increments. Visual and audible alarms signal continuously (for days) even if temperature returns to non-alarm range. First thermometer ever designed to permit user one-button calibration.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Resolution is 0.01°
• Displays date and time of min/max temperature
• High and low settable alarms|Unit conforms to ITS-90, International Temperature Standard
• Takes routine measurements at 37.00°C

Includes

Stand, hook-and-loop fastener, magnetic strips, wall mount, stainless-steel probe, two AA batteries, and NIST-traceable calibration certificate.

93830-48 Type J Grounded Industrial Thermocouple Probe, 4" Length, 1/2" Connection by Digi-Sense

Thermocouple Probes Assemblies are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 20 gauge wire encased by ceramic insulators along with a standard size aluminum protection head. Head features a gasketed cap to seal out dust and moisture and houses a ceramic terminal block with screw terminals. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

GHS1252 Clear Workplace Label Protectors (4" x 6"), 500/roll by GHS Safety

Use GHS clear poly shields as long term protection for you workplace labels. Shields offer surface protection from weather and off chemical resistance. Shields are sized to match GHS stock workplace label sizes.

4" x 6" 500/roll

RAM-101U-2461 RAM Mount with Vesa plate75mm for ALG7-05A, ALG10X-05A by Handheld

• Mount with Vesa plate 75 mm
• Used with ALG7-05A
• Includes a set of four screws