Sensorex

DO6441/T/10/TL DO Sensor, 0-100%, 4-20mA, with Accessories by Sensorex

The DO6400 & 7400 series dissolved oxygen sensors feature a large capacity electrolyte holder, positive fit, easy to replace membrane and dependable galvanic cell technology for long term deployment. The body design ensures a good grip when wet. Ideal for Aquaculture and wastewater monitoring applications, these sensors require minimal maintenance. PTFE or High-Density Polyethylene (HDPE) membranes are available. 2 Replacement membranes, installation tool and electrolyte are included. Additional maintenance parts are in convenient kits (see ordering information). Sensors with mV output as well as built-in 4-20mA output in 0-100% and 0-200% saturation range are available. In addition, Modbus-485 output versions with 0-100% or 0-300% range are available.

Digital Communication for More Process Visibility:

• Modbus and 4-20 mA output options now available
• Con guration and calibration can be done using web based software

Easy to Install and Maintain

• Membranes can be replaced quickly
• Designed to have good grip even when sensor is wet

Long Lasting Life

• Proven and dependable galvanic cell technology with large solution capacity
• Replacement membranes, electrolyte, and installation tool are included

CS665-B-1-BC-3-A-7 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor, K=10, TC, 10FT, TL, 1.5" San by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS675HTTC-K=0.1 Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C

S272CD-ORP/10/BNC Online Process ORP Sensor, PT, 3/4" NPT, PPS, 10ft, BNC by Sensorex

Our S272 series of pH and ORP sensors deliver reliable online monitoring for in-line or submersion installation configuration. Double-junction reference extends sensor lifetime by preventing contamination of the reference with sample components that interact with Silver (Ag). Minimal maintenance required due to the flat glass measurement surface, which also reduces the threat of measurement surface breakage. A versatile sensor for moderate and multi-purpose applications. S272 sensors come with a fully integrated cable assembly, and automatic temperature compensation is available for applications where it is required.

Features:

• Reliable performance in demanding applications
• Double junction prevents reference contamination
• Easy installation for various online monitoring sytems
• Suitable for use in a range of chemical environments
• One year limited warranty

S272CDTC/P1K/10/TL/TL pH Electrode, double-junction, P1K, TL/TL by Sensorex

This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion pH measurements. Based on our proven S200C bulb and S350CD flat surface pH glass technology, these rugged and durable electrodes are available in Ryton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps. Choose from single or double junction designs, flat or recessed measuring surface configurations and cable lengths and connectors as required.

• Economical design for in-line or submersion use
• Choose from single or double junction models
• Threaded 1/2" or 3/4" NPT connections
• Choose from spherical or flat pH measuring surfaces
• Special models for low ionic and other specialty applications available

S8000CD-ORP-AU ORP Electrode cartridge, Gold sensor, double junction by Sensorex

The S8000 series flat surface self-cleaning electrode platform is designed for versatility and flexibility. You purchase only the components that you need and can adapt what you have to changing interface or application requirements.

The pH and ORP sensors provide reliable performance in demanding applications, including pressurized applications, by utilizing Sensorex's proven flat surface technology. Liquid flow naturally cleans the flat sensor surface, reducing maintenance and downtime. When the sensors need to be replaced, install a replacement cartridge in seconds with no tools or rewiring required. For applications involving heavy metals, proteins, silver, or sulfides, Sensorex's ERP technology provides a complex path that protects the reference cell and prevents contamination. Heavy duty high temperature reference gels offer protection against thermal breakdown, while a PPS body allows for durability in a range of chemical environments.

For applications that require more than a direct electrode output, plug-in electronic modules are available. Caps/cables are stocked and ready to ship in two standard lengths, 10 feet and 20 feet. Special cable lengths are also available.

Features:

• Customizable packages reduce total cost of ownership
• Reliable performance in demanding applications
• Configuarable for in-line or submersion use
• Self-cleaning, flat surface design
• Perfect for pressurized applications

S500C-ORP ORP Sensor, Platinum, 12mm, Polymer Body by Sensorex

Some of our laboratory ORP electrodes, including the S550C-ORP/BNC, have gotten an update! Looking for a polymer body, double junction ORP electrode for lab use? Check out the ORP2000, which replaces the S550C-ORP in our new laboratory ORP electrode line.

TDS15000 Conductivity Solution, 15,000ppm/16,630uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

S267C pH Sensor, Bulb, 3/4" NPT, PPS by Sensorex

This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion pH measurements. Based on our proven S200C bulb and S350CD flat surface pH glass technology, these rugged and durable electrodes are available in Ryton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps. Choose from single or double junction designs, flat or recessed measuring surface configurations and cable lengths and connectors as required.

• Economical design for in-line or submersion use
• Choose from single or double junction models
• Threaded 1/2" or 3/4" NPT connections
• Choose from spherical or flat pH measuring surfaces
• Special models for low ionic and other specialty applications available

CX100 Loop Powered 4-20mA Conductivity Transmitter, 4-20mA, VDC, w/ Display by Sensorex

The CX100 is a loop powered conductivity transmitter for use with contacting conductivity sensors. The 4-20mA output is ideal for connecting to a PLC for advanced control systems. Easily power the unit with available two-wire power supply loop. Versatile mounting options for wall or panel mount.

Features:

• Flexible configurations: Six selectable conductivity ranges
• Facilitates easy sensor maintenance: Output 'HOLD' for calibration & setup to avoid process disruption
• Accurate conductivity / TDS measurements: Integrated Automatic Temperature Compensation (ATC)
• Compatible with a wide variety of sensors: For use with all Sensorex contacting conductivity sensors
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

B225 Zobell ORP Calibration Solution by Sensorex

Use this pre-mixed ORP calibration solution for verifying and calibrating ORP sensors.The solution standard is 228mV and is widely used for ORP sensor calibration. Supplied in a pint (16oz) bottle with long term stability.

Features:

• Simple calibration of ORP sensors to known standard
• Fast response time with all ORP sensors
• No mixing required - solution is pre-mixed and instantly ready for use
• One year shelf life guaranteed

S653 S600 Series Cable, CPVC, Quick Disconnect by Sensorex

With threading for submersion mounting, the S653 Cable Assembly is the perfect complement to our S651CD Submersible Electrode series. This cable assembly is designed to submerge the electrode in tanks, flumes and sewer lines. The cost-effective CPVC construction is well suited for most water and wastewater applications. Pairing the S653 Cable Assembly with an S651CD series Electrodes allows for quick electrode changes, drastically reducing downtime due to maintenance.

• Use with one of our S651CD series Electrodes for quick and easy maintenance
• Threading design for fast and simple installation
• Durable CPVC design is suitable for most applications
• One year limited warranty

S653/10/TL S600 Series Cable, CPVC, 10ft(3M), TL by Sensorex

With threading for submersion mounting, the S653 Cable Assembly is the perfect complement to our S651CD Submersible Electrode series. This cable assembly is designed to submerge the electrode in tanks, flumes and sewer lines. The cost-effective CPVC construction is well suited for most water and wastewater applications. Pairing the S653 Cable Assembly with an S651CD series Electrodes allows for quick electrode changes, drastically reducing downtime due to maintenance.

• Use with one of our S651CD series Electrodes for quick and easy maintenance
• Threading design for fast and simple installation
• Durable CPVC design is suitable for most applications
• One year limited warranty

TDSK1413 Conductivity Solution, 1413uS KCl, 1Qt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

S651CDHF pH Sensor, Flat, CPVC, HT, HF Resistant by Sensorex

Our S651CD-HF submersible pH electrode is ideal for acidic environments that utilize hydrofluoric acid (HF). The self-cleaning, flat-surface design makes the this electrode resistant to coating, increasing time between maintenance cycles. Protective feet guard the pH glass against breakage, and double junction reference protection extends the lifetime of the sensor. Should a replacement sensor be required, the S651CD-HF is equipped with quick disconnect BNC connections to minimize downtime due to electrode maintenance. Designed for use with our S653 Cable Assembly for the S651CD for a complete Submersible Flat-Surface, Self-Cleaning pH measurement solution, even in acidic HF conditions.

• HF resistant pH glass for extended lifetime in harsh conditions
• Flat surface design resists coating
• Double junction reference protection extends sensor lifetime
• Use with our S653 Cable Assembly for quick and easy maintenance
• Reliable CPVC construction
• One year limited warranty

S655CD pH Sensor, Flat, CPVC, for Insertion by Sensorex

Without the need for system shutdown for electrode maintenance, the insertion assembly allows pH measurements to be made in pressurized tanks and main lines. The assembly's adjustable insertion depth allows it to be placed in a turbulent flow region, enabling it to operate in the selfcleaning mode.

In abrasive applications, the electrode is best positioned flush with the pipe wall or tank wall. High suspended solids and viscous liquid pH measurements are simple with the insertion assembly and electrode pair. The specially designed internal makes the electrode mountable in virtually any direction, including inverted. A 1" full-port ball-valve (Sensorex BV-1) is recommended for installation.

New part number S656CD has four protective pads to reduce pH glass breakage. The S656CD replaces the 970283 which is now obsolete. In addition to the protective pad feature, the S656CD also includes our high performance acrylamide gel that provides longer life in many applications.

• Quick disconnect design saves time and money
• Installs in seconds, no tools necessary
• Flat-surface design resists coating
• CPVC or PVDF construction
• Available with or without ATC elements
• Protective tip reduces pH glass breakage (S656CD)

S656CD pH Sensor, Flat, CPVC, for Insertion by Sensorex

Without the need for system shutdown for electrode maintenance, the insertion assembly allows pH measurements to be made in pressurized tanks and main lines. The assembly's adjustable insertion depth allows it to be placed in a turbulent flow region, enabling it to operate in the selfcleaning mode.

In abrasive applications, the electrode is best positioned flush with the pipe wall or tank wall. High suspended solids and viscous liquid pH measurements are simple with the insertion assembly and electrode pair. The specially designed internal makes the electrode mountable in virtually any direction, including inverted. A 1" full-port ball-valve (Sensorex BV-1) is recommended for installation.

New part number S656CD has four protective pads to reduce pH glass breakage. The S656CD replaces the 970283 which is now obsolete. In addition to the protective pad feature, the S656CD also includes our high performance acrylamide gel that provides longer life in many applications.

• Quick disconnect design saves time and money
• Installs in seconds, no tools necessary
• Flat-surface design resists coating
• CPVC or PVDF construction
• Available with or without ATC elements
• Protective tip reduces pH glass breakage (S656CD)

B125 ORP Calibration Kit by Sensorex

The B125 ORP Calibration kit can be used for a simple calibration of both pH and ORP sensors. Use this kit for pH calibration, then convert the pH buffers into stable ORP buffers by saturating with quinhydrone. The B125 ORP calibration kit is a complete, ready-to-use package and can be used for up to 30 calibrations.

Features:

• Simple calibration of pH and ORP simultaneously
• Fast response time
• Mix and prepare the calibration buffers in seconds
• Instantly ready for use and ships with plastic beakers and stirring sticks
• One year shelf life guaranteed

TDS9523 Conductivity Solution, 9523ppm/10,000uS, 1Qrt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)