Online Sensors & Analyzers, Sensorex

CS675-C-1-DA-3-A-5-H-3 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, TC, 6", 4 Wire, TL, 3/4" NPT by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-C-1-GA-3-A-5-H-2 High Temp & Pressure SS Contacting Conductivity Sensor, CS675HTTC-K=1, P1K, 6" Leads, TL by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-C-1-GA-3-A-5-H-3 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, CS676HTTC- K=1, P1K, 6 Inch, TL by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-C-1-GA-3-A-5-J-2 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, TC, 6", 4 Wire, TL, 3/4" by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-C-N-BA-3-A-5-C-2 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, 6", 2 Wire, TL, 3/4" by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675HTTC-K=0.1 Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C

CS675HTTC-K=1 Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C

CS675HTTC-K=1/P1K Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C

CS675HTTC-K=10 Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C

CS676HTTC-K=0.1 Stainless Steel High Temperature Conductivity Sensor (3/4" Extended Length) by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Mounted in 1" cross with reducer to 3/4". Featuring thermally-resistant PEEK insert and high temperature sealing rings to withstand temperatures of up to 200°C. Supplied with 6" PTFE coated leads for junction box connection. For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Extended length for mounting in cross

CS700-A-1-CC-3-A-5-B CS700 High Performance Stainless Steel Contacting Conductivity Sensor, K=0.01, TC, 10Ft, TL, 3/4" NPT by Sensorex

The CS700 High Performance Contacting Conductivity Sensor is ideally suited for ultrapure/pure water, drinking water, and lower-conductivity drinking water applications. It's durable in high-temperature (150° C / 302° F) and high-pressure environments (1,379 kpa / 200 psig), thanks to stainless steel and teflon construction. In addition, quick installation is made possible via using compression fitting with 3/4" or 1/2" threads. Pick from three cell constants based on your application: 0.01, 0.1 (available soon) and 1.0 (available soon).

High Accuracy and Repeatability

• Accuracy is 2% of reading with 1% repeatability
• Electro-polish finish provides excellent stability and consistency

Multiple Cell Constants Cover Wide Range of Applications

• 0.01/cm for ultra-pure/pure water
• 0.1/cm for pure and drinking water
• 1.0/cm for wastewater and process water

Durable in High-Temperature and High-Pressure Environments

• Built from 316 Stainless Steel and Teflon
• Withstands up to 150° C (302° F) and 1379 KPA (200 PSIG)

CS700-B-1-CC-3-A-5-B CS700 High Performance Stainless Steel Contacting Conductivity Sensor, K=0.1, TC, 10Ft, TL, 3/4" NPT by Sensorex

The CS700 High Performance Contacting Conductivity Sensor is ideally suited for ultrapure/pure water, drinking water, and lower-conductivity drinking water applications. It's durable in high-temperature (150° C / 302° F) and high-pressure environments (1,379 kpa / 200 psig), thanks to stainless steel and teflon construction. In addition, quick installation is made possible via using compression fitting with 3/4" or 1/2" threads. Pick from three cell constants based on your application: 0.01, 0.1 (available soon) and 1.0 (available soon).

High Accuracy and Repeatability

• Accuracy is 2% of reading with 1% repeatability
• Electro-polish finish provides excellent stability and consistency

Multiple Cell Constants Cover Wide Range of Applications

• 0.01/cm for ultra-pure/pure water
• 0.1/cm for pure and drinking water
• 1.0/cm for wastewater and process water

Durable in High-Temperature and High-Pressure Environments

• Built from 316 Stainless Steel and Teflon
• Withstands up to 150° C (302° F) and 1379 KPA (200 PSIG)

CS700-C-1-CC-3-A-2-B CS700 High Performance Stainless Steel Contacting Conductivity Sensor, K=1.0, TC, 10Ft, TL, 1/2" NPT by Sensorex

The CS700 High Performance Contacting Conductivity Sensor is ideally suited for ultrapure/pure water, drinking water, and lower-conductivity drinking water applications. It's durable in high-temperature (150° C / 302° F) and high-pressure environments (1,379 kpa / 200 psig), thanks to stainless steel and teflon construction. In addition, quick installation is made possible via using compression fitting with 3/4" or 1/2" threads. Pick from three cell constants based on your application: 0.01, 0.1 (available soon) and 1.0 (available soon).

High Accuracy and Repeatability

• Accuracy is 2% of reading with 1% repeatability
• Electro-polish finish provides excellent stability and consistency

Multiple Cell Constants Cover Wide Range of Applications

• 0.01/cm for ultra-pure/pure water
• 0.1/cm for pure and drinking water
• 1.0/cm for wastewater and process water

Durable in High-Temperature and High-Pressure Environments

• Built from 316 Stainless Steel and Teflon
• Withstands up to 150° C (302° F) and 1379 KPA (200 PSIG)

CS8000TC-K=1/P1K Conductivity Sensor, K=1, P1K, 8-Pin Din Top Cap by Sensorex

Ideal for continuous monitoring in boiler, cooling tower, and other process applications, the CS8000 is a convenient and reliable conductivity monitoring probe.

The probe installs in seconds, with a keyed flange to ensure proper sensor orientation. Cleaning, calibrating, and replacing sensors has never been easier. The S855 cable assembly detaches from the sensor body in seconds with no tools required, just hand loosen the knurled nut and remove the sensor. Flush mount graphite measuring suface is easily cleaned with detergent and a soft bristled brush.

Temperature compensation is included with a choice of sensor types (10K NTC, 30K NTC, Pt 1000RTD & Pt100 RTD) to match the requirements of your conductivity transmitter or controller. Compatible with Sensorex controllers and transmitters as well as those from other manufacturers.

Order the CS8000TC by itself, or in a pre-configured kit that includes the cable assembly and flow cell.

Features:

• Installs in seconds with no tools necessary
• Quick disconnect cable enables easy sensor maintenance
• Flat measurement surface resists coating
• Built in automatic temperature compensation Compatible with a wide range of transmitters and controllers

CX10 Conductivity Transmitter, 4-20mA, VDC, with Display by Sensorex

The CX10 and CX20 transmitter series offers a cost-effective, small footprint solution for conductivity and resistivity process measurements. Save space in your panel with either of these 1/8 DIN case models. The simple and easy to understand user interface features a four button membrane keypad for quick set up and programming. The CX10 has an isolated, reversible 4-20mA current output, providing versatility for a wide range of process control applications. The CX20 features two sets of programmable on/off relays, allowing the device to control warning lights, alarms or other process control systems.

Features:

• LCD displays conductivity or resistivity & temperature
• Easy to install 1/8 DIN plastic case
• Universal power supply input from 100-240VAC
• Automatic or manual temperature compensation
• Two sets of programmable on/off relays (CX20) or isolated, reversible 4-20mA current output (CX10)

CX100 Loop Powered 4-20mA Conductivity Transmitter, 4-20mA, VDC, w/ Display by Sensorex

The CX100 is a loop powered conductivity transmitter for use with contacting conductivity sensors. The 4-20mA output is ideal for connecting to a PLC for advanced control systems. Easily power the unit with available two-wire power supply loop. Versatile mounting options for wall or panel mount.

Features:

• Flexible configurations: Six selectable conductivity ranges
• Facilitates easy sensor maintenance: Output 'HOLD' for calibration & setup to avoid process disruption
• Accurate conductivity / TDS measurements: Integrated Automatic Temperature Compensation (ATC)
• Compatible with a wide variety of sensors: For use with all Sensorex contacting conductivity sensors
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

CX105-P CX105 Conductivity Transmitter 24V DC Loop-Powered by Sensorex

Our CX105 is an isolated output 4-20mA industrial transmitter for reading contacting Conductivity sensors, as well as TDS and Resistivity. Easily power the unit with available two-wire power supply loop. Ideal for connecting to a PLC for advanced control systems. Versatile mounting options for wall or panel mount. With a dual display LCD, monitoring both the measuring value and the temperature is simple.

The CX105 is CE certified.

Features:

• SHEETLarge LCD screen for easy reading
• Isolated 4-20 mA analog output
• Automatic temperature compensation
• Flexible mounting options

CX20 Conductivity Controller, 2 Relays, 110-220VAC 1/8 DIN by Sensorex

The CX10 and CX20 transmitter series offers a cost-effective, small footprint solution for conductivity and resistivity process measurements. Save space in your panel with either of these 1/8 DIN case models. The simple and easy to understand user interface features a four button membrane keypad for quick set up and programming. The CX10 has an isolated, reversible 4-20mA current output, providing versatility for a wide range of process control applications. The CX20 features two sets of programmable on/off relays, allowing the device to control warning lights, alarms or other process control systems.

Features:

• LCD displays conductivity or resistivity & temperature
• Easy to install 1/8 DIN plastic case
• Universal power supply input from 100-240VAC
• Automatic or manual temperature compensation
• Two sets of programmable on/off relays (CX20) or isolated, reversible 4-20mA current output (CX10)

CX2000 Conductivity Transmitter/Controller, 4-20mA, VAC, Relays, 1/4 DIN by Sensorex

The CX2000 is a full-featured Conductivity or Resistivity transmitter/controller. Simply power up your CX2000 with 110-240V AC power and you get a controller with a wide range of useful features:

2 relays, 1 wash control, 2 each 4-20mA outputs (Cond & Temp or Resistivity & Temp).

Calibration is simple with preset standards and can be password protected with a programmable security code.

Mounting choices include: wall or panel.

The large LCD display with auto-sense backlight and contrast adjust makes the CX2000 display so it can be easily viewable in all areas.

Features:

• Hz4-20mA outputs for conductivity or resistivity + temp
• 2 Hi/Lo Relays for controlling alarms, pumps and more
• Large LCD display with auto-sense backlight and contrast setting
• NEMA 4X, IP65 enclosure
• Sample averaging to enhance stability
• Compatible with Sensorex CS8000 and CS150 series sensors