Online Sensors & Analyzers, Sensorex

CS650 Stainless Steel Conductivity Sensor by Sensorex

The Sensorex CS650 Stainless Steel Conductivity Sensor is a general purpose sensor to be used in a variety of benign applications (cooling towers, dimineralizer influent, etc). It features a robust single body design made of 316 stainless steel. It has a hexagonal body and 1/2" NPT connection for ease of installation.

General-Purpose Sensor for Use in a Variety of Applications

• Cooling Towers
• Demin Influent

Robust Single-Body Design

• 1/2" NPT Stainless Steel
• Hexagonal body shape for ease of installation

CS650-B-1-BC-3-A CS650 Stainless Steel Conductivity Sensor, K=0.1, 1/2" NPT, TC, 10ft, TL by Sensorex

The Sensorex CS650 Stainless Steel Conductivity Sensor is a general purpose sensor to be used in a variety of benign applications (cooling towers, dimineralizer influent, etc). It features a robust single body design made of 316 stainless steel. It has a hexagonal body and 1/2" NPT connection for ease of installation.

General-Purpose Sensor for Use in a Variety of Applications

• Cooling Towers
• Demin Influent

Robust Single-Body Design

• 1/2" NPT Stainless Steel
• Hexagonal body shape for ease of installation

CS650-C-1-AC-3-A CS650 Stainless Steel Conductivity Sensor, K=1.0, 1/2" NPT, TC, 10ft, TL by Sensorex

The Sensorex CS650 Stainless Steel Conductivity Sensor is a general purpose sensor to be used in a variety of benign applications (cooling towers, dimineralizer influent, etc). It features a robust single body design made of 316 stainless steel. It has a hexagonal body and 1/2" NPT connection for ease of installation.

General-Purpose Sensor for Use in a Variety of Applications

• Cooling Towers
• Demin Influent

Robust Single-Body Design

• 1/2" NPT Stainless Steel
• Hexagonal body shape for ease of installation

CS650-C-1-BC-3-A CS650 Stainless Steel Conductivity Sensor, 1.0, PT1000, 10 ft Cable, Tinned Leads by Sensorex

The Sensorex CS650 Stainless Steel Conductivity Sensor is a general purpose sensor to be used in a variety of benign applications (cooling towers, dimineralizer influent, etc). It features a robust single body design made of 316 stainless steel. It has a hexagonal body and 1/2" NPT connection for ease of installation.

General-Purpose Sensor for Use in a Variety of Applications

• Cooling Towers
• Demin Influent

Robust Single-Body Design

• 1/2" NPT Stainless Steel
• Hexagonal body shape for ease of installation

CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-A-1-BC-3-A-8 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor, K=0.01, TC, 10FT, TL, 2.0" San by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-A-2-BC-3-A-7 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-A-2-BC-3-A-8 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-B-1-BC-3-A-8 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor, K=0.1, TC, 10FT, TL, 2.0" San by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-B-2-BC-3-A-7 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-B-2-BC-3-A-8 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-C-1-BC-3-A-7 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor, K=0.1, TC, 10FT, TL, 1.5" San by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-C-1-BC-3-A-8 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor, K=10, TC, 10FT, TL, 2.0" San by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-C-2-BC-3-A-7 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS665-C-2-BC-3-A-8 CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor by Sensorex

Sensorex CS665 is designed to withstand CIP and steam sterilization process. It is ideal for sanitary installation with options for 1.5" or 2" tri-clamp connection. Select from three cell constants and use temperature compensation for best performance.

Ideal for Sanitary Installation

• 1.5" and 2" tri-clamp options
• Made from 316 Stainless Steel

Accurate Measurements

• Select from three cell constants based on your measurement range
• Use temperature compensation for best performance

CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-B-N-BA-3-A-5-C-1 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=0.1, 6",2 Wire, TL, 3/4" by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-C-1-DA-3-A-5-H-3 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, TC, 6", 4 Wire, TL, 3/4" NPT by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-C-1-DC-3-A-5-C-2 Conduct Sensor, CS675TC-K=1, P1K, 10ft, TL by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-C-N-BA-3-A-5-C-2 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, 6", 2 Wire, TL, 3/4" by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675HTTC-K=1 Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C

CS675HTTC-K=1/P1K Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C

CS675HTTC-K=10 Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C