$300 - $400, Online Sensors & Analyzers, Sensorex

DO1200TC/H DO1200 Dissolved Oxygen Sensor, Galvanic, 12mm, Hand Held, HDPE Membrane with ATC by Sensorex

The DO1200 and DO1200TC feature dependable galvanic technology. No warm up period is required. Sensors are supplied with fast responding HDPE membrane caps for portable or lab use. Optional PTFE membrane caps are available for on-line or heavy UV exposure applications. Fill solution is replaceable when required.

The DO1200 is supplied without internal temperature compensation. The DO1200TC can be supplied with a variety of user defined ATC elements. Standard cable length is 2.5 feet with a tinned lead termination. Longer cable lengths and connectors are available for an additional charge. For on-line use, our FC75P 3/4 inch in-line fitting may be ordered to provide for mounting into 3/4 inch FNPT threaded tees.

Features

• Reliable galvanic sensing technology
• Compact 12mm design
• For portable, laboratory or on-line use
• Optional integral ATC element
• Easy to use pre-membraned replacement caps

CS676HTTC-K=1 Stainless Steel High Temperature Conductivity Sensor (3/4" Extended Length) by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Mounted in 1" cross with reducer to 3/4". Featuring thermally-resistant PEEK insert and high temperature sealing rings to withstand temperatures of up to 200°C. Supplied with 6" PTFE coated leads for junction box connection. For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Extended length for mounting in cross

CS675-C-1-GA-3-A-5-J-2 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, TC, 6", 4 Wire, TL, 3/4" by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS650-B-N-AC-3-A CS650 Stainless Steel Conductivity Sensor, K=0.1, 1/2" NPT, No TC, TL by Sensorex

The Sensorex CS650 Stainless Steel Conductivity Sensor is a general purpose sensor to be used in a variety of benign applications (cooling towers, dimineralizer influent, etc). It features a robust single body design made of 316 stainless steel. It has a hexagonal body and 1/2" NPT connection for ease of installation.

General-Purpose Sensor for Use in a Variety of Applications

• Cooling Towers
• Demin Influent

Robust Single-Body Design

• 1/2" NPT Stainless Steel
• Hexagonal body shape for ease of installation

CS650-C-N-AC-3-A CS650 Stainless Steel Conductivity Sensor, K=1.0, 1/2" NPT, No TC, 10ft, TL by Sensorex

The Sensorex CS650 Stainless Steel Conductivity Sensor is a general purpose sensor to be used in a variety of benign applications (cooling towers, dimineralizer influent, etc). It features a robust single body design made of 316 stainless steel. It has a hexagonal body and 1/2" NPT connection for ease of installation.

General-Purpose Sensor for Use in a Variety of Applications

• Cooling Towers
• Demin Influent

Robust Single-Body Design

• 1/2" NPT Stainless Steel
• Hexagonal body shape for ease of installation

CS650 Stainless Steel Conductivity Sensor by Sensorex

The Sensorex CS650 Stainless Steel Conductivity Sensor is a general purpose sensor to be used in a variety of benign applications (cooling towers, dimineralizer influent, etc). It features a robust single body design made of 316 stainless steel. It has a hexagonal body and 1/2" NPT connection for ease of installation.

General-Purpose Sensor for Use in a Variety of Applications

• Cooling Towers
• Demin Influent

Robust Single-Body Design

• 1/2" NPT Stainless Steel
• Hexagonal body shape for ease of installation

CS650-C-1-AC-3-A CS650 Stainless Steel Conductivity Sensor, K=1.0, 1/2" NPT, TC, 10ft, TL by Sensorex

The Sensorex CS650 Stainless Steel Conductivity Sensor is a general purpose sensor to be used in a variety of benign applications (cooling towers, dimineralizer influent, etc). It features a robust single body design made of 316 stainless steel. It has a hexagonal body and 1/2" NPT connection for ease of installation.

General-Purpose Sensor for Use in a Variety of Applications

• Cooling Towers
• Demin Influent

Robust Single-Body Design

• 1/2" NPT Stainless Steel
• Hexagonal body shape for ease of installation

CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-B-N-BA-3-A-5-C-1 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=0.1, 6",2 Wire, TL, 3/4" by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-C-1-DA-3-A-5-H-3 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, TC, 6", 4 Wire, TL, 3/4" NPT by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS675-C-N-BA-3-A-5-C-2 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, 6", 2 Wire, TL, 3/4" by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

CS676HTTC-K=0.1 Stainless Steel High Temperature Conductivity Sensor (3/4" Extended Length) by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Mounted in 1" cross with reducer to 3/4". Featuring thermally-resistant PEEK insert and high temperature sealing rings to withstand temperatures of up to 200°C. Supplied with 6" PTFE coated leads for junction box connection. For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Extended length for mounting in cross

CX10 Conductivity Transmitter, 4-20mA, VDC, with Display by Sensorex

The CX10 and CX20 transmitter series offers a cost-effective, small footprint solution for conductivity and resistivity process measurements. Save space in your panel with either of these 1/8 DIN case models. The simple and easy to understand user interface features a four button membrane keypad for quick set up and programming. The CX10 has an isolated, reversible 4-20mA current output, providing versatility for a wide range of process control applications. The CX20 features two sets of programmable on/off relays, allowing the device to control warning lights, alarms or other process control systems.

Features:

• LCD displays conductivity or resistivity & temperature
• Easy to install 1/8 DIN plastic case
• Universal power supply input from 100-240VAC
• Automatic or manual temperature compensation
• Two sets of programmable on/off relays (CX20) or isolated, reversible 4-20mA current output (CX10)

DO1200TC/T DO1200 Dissolved Oxygen Sensor, Galvanic, 12mm, Hand Held, PTFE Membrane with ATC by Sensorex

The DO1200 and DO1200TC feature dependable galvanic technology. No warm up period is required. Sensors are supplied with fast responding HDPE membrane caps for portable or lab use. Optional PTFE membrane caps are available for on-line or heavy UV exposure applications. Fill solution is replaceable when required.

The DO1200 is supplied without internal temperature compensation. The DO1200TC can be supplied with a variety of user defined ATC elements. Standard cable length is 2.5 feet with a tinned lead termination. Longer cable lengths and connectors are available for an additional charge. For on-line use, our FC75P 3/4 inch in-line fitting may be ordered to provide for mounting into 3/4 inch FNPT threaded tees.

Features

• Reliable galvanic sensing technology
• Compact 12mm design
• For portable, laboratory or on-line use
• Optional integral ATC element
• Easy to use pre-membraned replacement caps

S420C/10/BTD pH Sensor, Yellow Cap, 10 ft, Boot BNC by Sensorex

Sensorex offers an industrial grade high quality direct fit replacement for the Strantrol® pH and ORP electrodes. The Sensorex pH & ORP electrodes contain a higher volume proprietary polymer gel for longer sensor life.

These electrodes will provide superior performance at a price that offers an exceptional value.

• Ready to deploy with no modifications necessary
• Quick and simple installation or retrofitting
• Increased electrode life with polymer gel technology
• Suitable for use in a range of chemical environments
• Improved accuracy through superior noise reduction

S420C/BTD pH Sensor, CPVC, Yellow Cap, 1m, Boot BNC by Sensorex

Sensorex offers an industrial grade high quality direct fit replacement for the Strantrol® pH and ORP electrodes. The Sensorex pH & ORP electrodes contain a higher volume proprietary polymer gel for longer sensor life.

These electrodes will provide superior performance at a price that offers an exceptional value.

• Ready to deploy with no modifications necessary
• Quick and simple installation or retrofitting
• Increased electrode life with polymer gel technology
• Suitable for use in a range of chemical environments
• Improved accuracy through superior noise reduction

TX10 pH/ORP Transmitter, 4-20mA, 110-220V AC, 1/8 Din by Sensorex

The TX10 and TX20 transmitter series offers a cost-effective, small footprint solution for pH and ORP process control. Save space in your panel with either of these 1/8 DIN size models. The simple and easy to understand user interface features a four button membrane keypad for quick set up and programming. The TX10 has an isolated, reversible 4-20mA current output, providing versatility for a wide range of process control applications. The TX20 features two sets of programmable on/off relays, allowing the device to control warning lights, alarms or other process control systems. Both models feature a large, clear LCD panel display for quick and easy reference to pH, or ORP, or temperature.

Features:

• Clear LCD displays pH or ORP and temperature
• Easy to install 1/8 DIN plastic enclosure
• Universal power supply input from 100-240VAC
• Automatic US and NIST buffer recognition
• Two sets of programmable on/off relays (TX20)
• Or isolated, reversible 4-20mA current output (TX10)