$300 - $400, Controllers & Transmitters, Sensorex

CX10 Conductivity Transmitter, 4-20mA, VDC, with Display by Sensorex

The CX10 and CX20 transmitter series offers a cost-effective, small footprint solution for conductivity and resistivity process measurements. Save space in your panel with either of these 1/8 DIN case models. The simple and easy to understand user interface features a four button membrane keypad for quick set up and programming. The CX10 has an isolated, reversible 4-20mA current output, providing versatility for a wide range of process control applications. The CX20 features two sets of programmable on/off relays, allowing the device to control warning lights, alarms or other process control systems.

Features:

• LCD displays conductivity or resistivity & temperature
• Easy to install 1/8 DIN plastic case
• Universal power supply input from 100-240VAC
• Automatic or manual temperature compensation
• Two sets of programmable on/off relays (CX20) or isolated, reversible 4-20mA current output (CX10)

ORPMA ORP Transmitter, 4-20mA, Blind by Sensorex

The Model ORPMA (encapsulated miniature transmitter) is a 2-wire, 4-20 mA ORP transmitter featuring encapsulated construction, high performance and small size. It can be interfaced with many display and control devices requiring a 4-20 mA input.

The unit is compatible will all SensoreX conventional combination ORP electrodes. It transforms the ORP signal to a 4-20 mA current proportional to the ORP level. This output may be transmitted over two wires to a control location. The same two wires provide power to the transmitter. Any 12 - 36 Volt D.C. power supply may be used. There are two adjustments on the transmitter to standardize probes for "SPAN" and "ZERO". The output can be monitored with a looppowered meter, a loop resistor or even a multi-meter during the standardization procedure.

• Compact size
• Easy-to-use
• 4-20mA loop-powered
• Adjustable zero and span
• Fully encapsulated

SSRE-C-MA/DR/K=0.1 Smart Remote Electronics, Conductivity, 4-20 mA output, DIN Rail Mount, K=0.1 by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-C-MA/DR/K=1.0 Smart Remote Electronics, Conductivity, 4-20 mA output, DIN Rail Mount, K=1.0 by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-C-MA/EN/K=0.1 Smart Remote Electronics, Conductivity, 4-20 mA output, UL Enclosure, K=0.1 by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-C-MA/EN/K=1.0 Smart Remote Electronics, Conductivity, 4-20 mA output, UL Enclosure, K=1.0 by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-C-MB/DR/K=0.1 Smart Remote Electronics, Conductivity, Modbus 485 output, DIN Rail Mount, K=0.1 by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-C-MB/DR/K=1.0 Smart Remote Electronics, Conductivity, Modbus 485 output, DIN Rail Mount, K=1.0 by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-C-MB/EN/2000 Smart Remote Electronics, Toroidal Conductivity, Modbus 485 output, UL Enclosure, 0-2000 mS Range by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-C-MB/EN/500 Smart Remote Electronics, Toroidal Conductivity, Modbus 485 output, UL Enclosure, 0-500 mS Range by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-O-MA/DR Smart Remote Electronics, ORP, 4-20 mA output, DIN Rail Mount by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-O-MA/EN Smart Remote Electronics, ORP, 4-20 mA output, UL Enclosure by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-O-MB/DR Smart Remote Electronics, ORP, Modbus 485 output, DIN Rail Mount by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-O-MB/EN Smart Remote Electronics, ORP, Modbus 485 output, UL Enclosure by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-P-MA/DR Smart Remote Electronics, pH, 4-20 mA output, DIN Rail Mount by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-P-MA/EN Smart Remote Electronics, pH, 4-20 mA output, UL Enclosure by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-P-MB/DR Smart Remote Electronics, pH, Modbus 485 output, DIN Rail Mount by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-P-MB/EN Smart Remote Electronics, pH, Modbus 485 output, UL Enclosure by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-T-MA/DR/2000 Smart Remote Electronics, Toroidal Conductivity, 4-20 mA output, DIN Rail Mount, 0-2000 mS Range by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-T-MA/DR/500 Smart Remote Electronics, Toroidal Conductivity, 4-20 mA output, DIN Rail Mount, 0-500 mS Range by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-T-MA/EN/2000 Smart Remote Electronics, Toroidal Conductivity, 4-20 mA output, UL Enclosure, 0-2000 mS Range by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-T-MA/EN/500 Smart Remote Electronics, Toroidal Conductivity, 4-20 mA output, UL Enclosure, 0-500 mS Range by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-T-MB/DR/2000 Smart Remote Electronics, Toroidal Conductivity, Modbus 485 output, DIN Rail Mount, 0-2000 mS Range by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

SSRE-T-MB/DR/500 Smart Remote Electronics, Toroidal Conductivity, Modbus 485 output, DIN Rail Mount, 0-500 mS Range by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting