Calibrations Standards & Maintenance Kits, Sensorex

B804 pH Buffer Solution, pH 4.01 Buffer Red (1 gallon) by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

IS222CD-NH4 Combination Ammonium ISE Electrode Cartridge 5.7"(145mm) L x 0.48" 12mm OD), 30" (.76m), Black Epoxy Body by Sensorex

Sensorex offers a combination Ion Selective Electrodes (ISE's) for Fluoride (F-), Chloride (Cl-), Ammonium (NH4+), Postassium (K+) and Nitrate (NO3-) measurement. These covenient combination electrodes use just one electrode to measure ppm of ions.

All Sensorex ISE's are housed in rugged plastic bodies and offer a choice of fixed cable or detachable cable design.

Use these electrodes with your ISE meter, pH meter in mV mode or with any mV input device.

Sensorex ISE's require little to know cleaning and are maintenance free (no reference or ISE refill solution required).

Each electrode is shipped in a bottle with or without a storage solution and are ready for immediate use.

• Easy-to-use combination sensors
• ISE types available: Fluoride (F-), Chloride (Cl-), Ammonium
• (NH4+), Postassium (K+) and Nitrate (NO3-)
• Fixed cable or quick-disconnect cartridge
• Rugged epoxy body

B225 Zobell ORP Calibration Solution by Sensorex

Use this pre-mixed ORP calibration solution for verifying and calibrating ORP sensors.The solution standard is 228mV and is widely used for ORP sensor calibration. Supplied in a pint (16oz) bottle with long term stability.

Features:

• Simple calibration of ORP sensors to known standard
• Fast response time with all ORP sensors
• No mixing required - solution is pre-mixed and instantly ready for use
• One year shelf life guaranteed

B810 pH Buffer Solution, pH 10.00 Buffer Blue (1 gallon) by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

IS200CD-NO3 Combination Nitrate ISE Electrode, 6.5"(165mm) L x 0.48" 12mm OD), 30" (.76m) Fixed Cable, Black Epoxy Body by Sensorex

Sensorex offers a combination Ion Selective Electrodes (ISE's) for Fluoride (F-), Chloride (Cl-), Ammonium (NH4+), Postassium (K+) and Nitrate (NO3-) measurement. These covenient combination electrodes use just one electrode to measure ppm of ions.

All Sensorex ISE's are housed in rugged plastic bodies and offer a choice of fixed cable or detachable cable design.

Use these electrodes with your ISE meter, pH meter in mV mode or with any mV input device.

Sensorex ISE's require little to know cleaning and are maintenance free (no reference or ISE refill solution required).

Each electrode is shipped in a bottle with or without a storage solution and are ready for immediate use.

• Easy-to-use combination sensors
• ISE types available: Fluoride (F-), Chloride (Cl-), Ammonium
• (NH4+), Postassium (K+) and Nitrate (NO3-)
• Fixed cable or quick-disconnect cartridge
• Rugged epoxy body

B130 pH Buffer Solution Kit, 1 Pt Each, B104+B107+B110 by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

B210 pH Buffer Solution, pH 10.00 Buffer, (Blue) 1 Quart by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

B104 pH Buffer Solution, pH 4.01 Buffer (Red), 1 pint (473ml) by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

B125 ORP Calibration Kit by Sensorex

The B125 ORP Calibration kit can be used for a simple calibration of both pH and ORP sensors. Use this kit for pH calibration, then convert the pH buffers into stable ORP buffers by saturating with quinhydrone. The B125 ORP calibration kit is a complete, ready-to-use package and can be used for up to 30 calibrations.

Features:

• Simple calibration of pH and ORP simultaneously
• Fast response time
• Mix and prepare the calibration buffers in seconds
• Instantly ready for use and ships with plastic beakers and stirring sticks
• One year shelf life guaranteed

CLDA-5018 Chlorine Dioxide Maintenance Kit for CLDS series sensors by Sensorex

Keep your chlorine dioxide amperometric sensors running for extended lifetime and improved accuracy using this chlorine dioxide maintenance kit. Compatible with CLD Series Chlorine Dioxide Amperometric Sensors. This kit includes:

• (1) replacement membrane cap
• (1) replacement pressure relief band
• (2) 30mL bottles of electrolyte refill solution
• (2) 10mL syringes
• (3) polishing squares

B110 pH Buffer Solution, pH 10.00 Buffer (Blue), 1 pint (473ml) by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

S016 Soaker Bottle Solution, 1 Pint (473 ml) by Sensorex

Extend the life of your pH and ORP sensors by using the Sensorex pH electrode storage solution. When the sensor is not in use, place the sensor glass measurement area into the storage solution. The pH electrode storage solutions are supplied in pints (473 ml).

B204 pH Buffer Solution, pH 4.01 Buffer, (Red) 1 Quart by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

B207 pH Buffer Solution, pH 7.00 Buffer, (Yellow) 1 Quart by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

B807 pH Buffer Solution, pH 7.00 Buffer Yellow (1 gallon) by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition