$2000 - $4000, RKI Instruments, RKI Instruments

73-0590RK-ATEX RX-415 Dual Gas IR For LEL/Volume HC & Oxygen, 0 - 100% LEL/0 - 100% Vol HC & 0 - 25% O2, Land Version (Isobutane Calibration) with ATEX/BASEEFA Approval by RKI Instruments

This model has two versions and is a combination type portable HC/O2 or CH4/O2 gas detector with an Infrared (NDIR) type sensor and galvanic cell type sensor. These sensors provide accurate detection of HC/O2 (HC version) or CH4/O2 (CH4 version) levels even in N2 and other inert environments. The measuring ranges are 0-100%LEL/0-100 vol% for HC or CH4 and 0-25 vol% for )2 respectively with automatic ranging. The RX-415 has explosion proof and intrinsically safe construction so that it can be used safely in any environment.

Features

• Available to measure from higher concentration (vol%) to lower concentration (%LEL)
• Explosion proof (Detector: Explosion proof, other electrical circuit and pump, intrinsically safe design)
• Available to measure HC/O2, CH4/O2 in N2, inert gas and air with a reliable NDIR method

Applications

• Measures gas concentrations in tank of LNG and LPG carriers
• Measures gas concentrations in crude oil tankers
• Measures gas concentration in inert gas generating system (IGS)

*Please note we can only ship RKI products to customers within the United States

73-0591RK-ATEX RX-415 Dual Gas IR For LEL/Volume HC & Oxygen, 0 - 100% LEL & 0 - 100% Vol CH4, & 0 - 25% O2, Land Version (CH4 Calibration) with ATEX/BASEEFA Approval by RKI Instruments

This model has two versions and is a combination type portable HC/O2 or CH4/O2 gas detector with an Infrared (NDIR) type sensor and galvanic cell type sensor. These sensors provide accurate detection of HC/O2 (HC version) or CH4/O2 (CH4 version) levels even in N2 and other inert environments. The measuring ranges are 0-100%LEL/0-100 vol% for HC or CH4 and 0-25 vol% for )2 respectively with automatic ranging. The RX-415 has explosion proof and intrinsically safe construction so that it can be used safely in any environment.

Features

• Available to measure from higher concentration (vol%) to lower concentration (%LEL)
• Explosion proof (Detector: Explosion proof, other electrical circuit and pump, intrinsically safe design)
• Available to measure HC/O2, CH4/O2 in N2, inert gas and air with a reliable NDIR method

Applications

• Measures gas concentrations in tank of LNG and LPG carriers
• Measures gas concentrations in crude oil tankers
• Measures gas concentration in inert gas generating system (IGS)

*Please note we can only ship RKI products to customers within the United States

73-0611RK RX-516 Multigas IR Monitor, 0 - 100% LEL/0 - 100% Vol HC/0 - 25% O2/0 - 100 PPM H2S by RKI Instruments

The Crude Oil Tanker model is a combination type portable HC, O2, and H2s gas detector with an Infrared (NDIR) type sensor, galvanic cell type sensor and Electro-chemical cell type sensor. These sensors provide accurate detection of HC, O2 and H2S levels even in N2 and other inert environments. The measuring ranges of model RX-516 are 0-100%LEL / 0-10%vol for HC, 0-25% vol for O2 and 0-100.0ppm for H2S respectively. A higher range for H2S (0-1,000ppm) is available in model RX-517. A manual switch is used to change the flow to a unique path for high H2S applications to protect the other sensors. The RX-516 / RX-517 has an explosion proof and Intrinsically Safe design so that it can be used safely in any envrionment.

Features

• Dual range detection of CH4 or HC in %vol and %LEL.
• Unique gas combinations include: CH4/O2/CO/CO2/HC/O2/H2S
• Accurately measure CH4 or HC from inerted tanks with infrared sensor.
• High range H2S 0-1,000ppm available (RX-517).
• Intrinsically safe design.
• Datalogging (Max 30 hours of interval trend).

Application

• Crude oil tanker storage tank gas monitoring

*Please note we can only ship RKI products to customers within the United States

81-DC2000 Data Cal 2000 Docking Station Includes Station, Power Cord, Serial Cable, and PC Software CD by RKI Instruments

The RKI Data Cal 2000 Docking and Calibration Station is a comprehensive instrument management system which provides charging, downloading, calibration, bump testing, and configuration for our Model GX-2009, GX-2003 and GX-2001 gas detection instruments. The system has configuration capabilities for alarm setting, datalog and calibration interval, user and location ID, and many other instrument parameters. Factory and user default settings are available for upload to instruments. The Data Cal 2000 is supplied with PC software, power and serial cords, and operating instructions. The Data Cal 2000 power requirements are 115VAC, 50/60Hz. PC or laptop to be supplied by customer.

Features:

• Automated instrument management for the GX-2001, GX-2003, and GX-2009
• Simultaneously service up to 10 instruments
• Calibrations, bump tests, and data downloads automatically performed and archived
• Manage instruments and archive records by serial #, user ID, or station ID
• Services are automatic, on-demand, or custom intervals
• Each docking module equipped with built-in flow control and status indicators
• Approaching and past due service prompts
• Alkaline recognition
• Single exhaust line for all instruments
• 5 inlet ports for separate gas mixtures
• Automatic quick charge in 90 minutes or less
• Create and save a list of common gas mixtures
• Automatic tracking of cylinder expiration
• Save factory and user default configurations for uploading to instruments
• Password protect configuration controls
• Records are easily exportable as CSV data
• Software is Windows 98, NT, 2000, and XP compatible
• Operates on any Pentium II or higher PC

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

81-DC2000-02 Data Cal 2000 Docking Station Includes Station, Power Cord, Serial Cable, PC Software CD, and Demand Flow Regulator by RKI Instruments

The RKI Data Cal 2000 Docking and Calibration Station is a comprehensive instrument management system which provides charging, downloading, calibration, bump testing, and configuration for our Model GX-2009, GX-2003 and GX-2001 gas detection instruments. The system has configuration capabilities for alarm setting, datalog and calibration interval, user and location ID, and many other instrument parameters. Factory and user default settings are available for upload to instruments. The Data Cal 2000 is supplied with PC software, power and serial cords, and operating instructions. The Data Cal 2000 power requirements are 115VAC, 50/60Hz. PC or laptop to be supplied by customer.

Features:

• Automated instrument management for the GX-2001, GX-2003, and GX-2009
• Simultaneously service up to 10 instruments
• Calibrations, bump tests, and data downloads automatically performed and archived
• Manage instruments and archive records by serial #, user ID, or station ID
• Services are automatic, on-demand, or custom intervals
• Each docking module equipped with built-in flow control and status indicators
• Approaching and past due service prompts
• Alkaline recognition
• Single exhaust line for all instruments
• 5 inlet ports for separate gas mixtures
• Automatic quick charge in 90 minutes or less
• Create and save a list of common gas mixtures
• Automatic tracking of cylinder expiration
• Save factory and user default configurations for uploading to instruments
• Password protect configuration controls
• Records are easily exportable as CSV data
• Software is Windows 98, NT, 2000, and XP compatible
• Operates on any Pentium II or higher PC

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

81-SDM2012-07 SDM-2012 Single Point Calibration Station for Gas Tracer with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Two Demand Flow Regulators, 103L Cyl CO/CH4/O2, 103L Cyl 1,000 ppm CH4/Air & 103L Cyl Zero Air by RKI Instruments

RKI's new SDM-2012 calibration station for the GX-2012 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2012 inside the SDM-2012 calibration module, the GX-2012's display will indicate whether it's transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Stand Alone Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charging (Li-Ion Battery Pack)
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure GX-2012 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-02 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, & Demand Flow Regulator by RKI Instruments

Stand Alone Calibration Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-08-P1 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Two Demand Flow Regulators, 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/12% O2 in N2, & 103L cyl 10 ppm Isobutylene in Air by RKI Instruments

Stand Alone Calibration Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

81-SDME2-09-P2 DM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Demand Flow Regulator, 58AL Cyl 25 ppm H2S/50 ppm CO/50% LEL CH4/100 ppm isoButylene/12% O2 in N2 by RKI Instruments

Stand Alone Calibration Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

GD-70DP-NF3 GD-70D Sample Drawing Sensor/Transmitter for Nitrogen Trifluoride (NF3), 0 - 30 ppm, Includes Pyrolyzer by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70DP-TEOS GD-70D Sample Drawing Sensor/Transmitter for TEOS, 0 - 15 ppm, Includes Pyrolyzer by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70DPLN-NF3 GD-70D Sample Drawing Sensor/Transmitter for Nitrogen Fluoride, 0 - 30 ppm, Includes Pyrolyzer, with LonWorks by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70DPLN-TEOS GD-70D Sample Drawing Sensor/Transmitter for TEOS, 0 - 15 ppm, Includes Pyrolyzer, with LonWorks by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

RI-215D IR Sample Draw Detector Head for CO2, 0 - 2000 PPM, (0 - 1 0,000 PPM Optional) by RKI Instruments

The RI-215 series of IR CO2 montitors are widely used in the measurement and control of CO2 levels in a variety of applications where CO2 monitoring or detection is required. A highly accurate, RKI non-dispersive infrared absorption sensor is used to provide direct measurements through diffusion or sample draw monitors, and activate alarms or control ventilation systems based on preset CO2 levels. Each model provides a digital readout in parts per million of CO2 providing precise measurement and direct visual indication of gas levels. A 4-20 mA output is provided to send a signal to a fire panel or other PLC system and a relay is available to trip an alarm or activate a ventilation system.

Three levels of measurement are provided: 0-2,000 ppm (ASHRAE 1969 IAQ max PEL), 0-5,000 ppm (leak detection of CO2 storage tanks) and 0-9,999 ppm. The RI-215A runs on 24 VAC or 24 VDC and the RI-215D with sample drawing pump runs on 115 VAC or 220 VAC. Each are designed for indoor use only and supplied in a NEMA 12 enclosure that is easily accessible for calibration, service, and continuous monitoring. RKI offers additional monitors with higher measurement levels in portable or fixed installation applications. Please contact an RKI authorized representative for more information on other CO2 monitors available

Features

• Easy to read LCD digital display
• Compact, lightweight and easy installation
• Highly reliable non-dispersive infrared detection method
• Recorder output signal
• Automatic control of ventilation systems
• Alarm contact output provided
• 4-20 mA output provided
• Diffusion or sample draw versions available

Applications

• Meets ASHRAE 1969 IAQ Standard of 2,000 ppm max PEL
• Detection of CO2 for NFPA 12 Regulations-CO2 storage tank leaks
• Green houses, wineries, breweries, food processing, indoor air quality, and other industry applications

*Please note we can only ship RKI products to customers within the United States

RI-215D-03-220 RI-215D CO2 IR Detector Head, Sample Draw, 0 - 5% CO2, 220 VAC In by RKI Instruments

The RI-215 series of IR CO2 montitors are widely used in the measurement and control of CO2 levels in a variety of applications where CO2 monitoring or detection is required. A highly accurate, RKI non-dispersive infrared absorption sensor is used to provide direct measurements through diffusion or sample draw monitors, and activate alarms or control ventilation systems based on preset CO2 levels. Each model provides a digital readout in parts per million of CO2 providing precise measurement and direct visual indication of gas levels. A 4-20 mA output is provided to send a signal to a fire panel or other PLC system and a relay is available to trip an alarm or activate a ventilation system.

Three levels of measurement are provided: 0-2,000 ppm (ASHRAE 1969 IAQ max PEL), 0-5,000 ppm (leak detection of CO2 storage tanks) and 0-9,999 ppm. The RI-215A runs on 24 VAC or 24 VDC and the RI-215D with sample drawing pump runs on 115 VAC or 220 VAC. Each are designed for indoor use only and supplied in a NEMA 12 enclosure that is easily accessible for calibration, service, and continuous monitoring. RKI offers additional monitors with higher measurement levels in portable or fixed installation applications. Please contact an RKI authorized representative for more information on other CO2 monitors available

Features

• Easy to read LCD digital display
• Compact, lightweight and easy installation
• Highly reliable non-dispersive infrared detection method
• Recorder output signal
• Automatic control of ventilation systems
• Alarm contact output provided
• 4-20 mA output provided
• Diffusion or sample draw versions available

Applications

• Meets ASHRAE 1969 IAQ Standard of 2,000 ppm max PEL
• Detection of CO2 for NFPA 12 Regulations-CO2 storage tank leaks
• Green houses, wineries, breweries, food processing, indoor air quality, and other industry applications

*Please note we can only ship RKI products to customers within the United States

SD-705RID Smart Transmitter With Alarm Relay/Infrared Gas Detector for %LEL Isobutane by RKI Instruments

This is a flame proof gas detectorfor LEL level detection of methane and many other hydrocarbons. This detector uses the non-dispersive infrared absorption (NDIR) detection method, which is free from interferences from H2, most non hydrocarbon refrigerants, and most other gases or vapors. The sensor also is not poisoned or influenced by silicon vapors, or corrosive vapors, which typically can destroy sensors from other detection methods.

The SD-705 is compact and easy to install and operate. The adjustment control is a magnetic wand that is easy to use by placing it onto the glass window of the gas detector. Gas concentration is read through window, and adjustable dual alarm contacts are provided for activation of external buzzer or alarm light. Powered by 24 VDC, the unit has a 4-20mA output for communication to outside controllers, for additional external readouts or alarming devices.

Features:

• Dual alarm contacts provided
• Simple adjustment with magnetic control key
• Non-dispersive infrared absorption (NDIR) method applied
• Remote detector connection capability
• Simple one man calibration
• Self-diagnostic by internal microprocessor
• Stable reading and good gas selection by NDIR
• Free from interference of inert gas and H2 etc
• Back-lit LCD provided
• Peakhold function provided (option)

*Please note we can only ship RKI products to customers within the United States

SD-805RID-HEX SD-805 Smart Transmitter/Gas Detector for %LEL Hexane by RKI Instruments

The model SD-805 series Smart Transmitter/detector heads are state of the art instruments housed in a flameproof enclosure.

A simple magnetic control key is placed over clear marked positions on the surface plate to test and adjust the instrumentwithout opening the transmitter/detector head.

Two different detection princples are provided with SD-805 series which enables you to select the most suitable principle according to your detection gas, range and application for use. Especially the model SD-805RI can detect combustible gases (CH4 and i-C4H10) with 0-100% volume F.S. in inert gas base.

Dual alarm contacts and trouble alarm contact are provided for activation of external buzzer or alarm light. Powered by 24 VDC, the unit has a 4-20mA output for communication to outside controllers, for external readouts or alarming devices.

An extensive range of accessories supplied by RKI rounds up Model SD-805 series

Features:

• For combustible and toxic gases
• Longlife RKI sensors
• Dual alarm contacts
• 4-20mA linear output
• Automatic zero correction function, self-diagnosis
• Explosion proof housing, IP65 ingress class
• ATEX and MED approved (Wheelmark)

*Please note we can only ship RKI products to customers within the United States