MSA, MSA

10076728 Altair Pro Single Gas-Detector Alternate Set Point Models - Hydrogen Sulfide (H2S) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10076732 Altair Pro Single Gas-Detector Alternate Set Point Models - Oxygen (O2) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10076736 Altair Pro Single-Gas Detector - Sulfur Dioxide (SO2) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10078252 Galaxy Automated Test System - Altair, Basic System by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078253 Galaxy Automated Test System - Altair, Standard System by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078254 Galaxy Automated Test System - Altair, Standard System + Cylinder Holder by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078255 Galaxy Automated Test System - Altair, Smart System by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078256 Galaxy Automated Test System - Altair, Smart System + Charging, Cylinder Holder by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078257 Galaxy Automated Test System - Altair, Portable System by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078258 Galaxy Automated Test System - Altair, Portable System + Memory Card, Cylinder Holder by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078259 Galaxy Automated Test System - Altair, Wired Network System + Charging, Cylinder Holder by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078262 Galaxy Automated Test System - Altair/Altair Pro + Regulator by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078263 Galaxy Automated Test System - Altair/Altair Pro, Regulator + Cylinder Holder by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078264 Galaxy Automated Test System - Altair/Altair Pro, Regulator + Memory Card by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078265 Galaxy Automated Test System - Altair/Altair Pro, Regulator + Cylinder Holder + Memory Card by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078266 Galaxy Automated Test System - Altair/Altair Pro, Regulator by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078267 Galaxy Automated Test System - Altair/Altair Pro, Regulator + Cylinder Holders + Memory Card by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10078268 Galaxy Automated Test System - Altair/Altair Pro, Regulator + Wired Web Interface by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.