MSA, MSA

11912 15' Sampling Line Assembly by MSA

For remote testing, sampling lines are available in length multiples of five feet. Synthetic rubber lines are fitted with couplings to connect with the instrument, probe tubes, or additional lengths of line.

10154079 Altair 2X Single Gas Detector, NH3 (25, 50), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

697344 Matched Flow Regulator, 0-2L/M by MSA

The Matched Flow Regulator is just that. It allows the user to observe the calibration gas flow being delivered by use of a flow meter. The flow indicator is color-coded to ensure the desired gas delivery. The large adjustment knob allows the user to adjust as needed. Ideal for calibration requirements that require controlled positive pressure. Designed for use with all Model RP and Econo-Cal Cylinders.

10089996 Galaxy Automated Test System - Altair 4/4X, Standard System + Charging, Cylinder Holder by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

10128625 Galaxy GX2 Automated Test System, Altair 5/Altair 5X, Charger, 4 Valve, North American Version by MSA

MSA is committed to providing the very best in sensor cell technology. From instrument design and manufacturing to datalogging and report generating software, MSA has consistently delivered products designed to optimize workplace safety and take an active approach to advancing jobsite performance. With the new Galaxy GX2 Automated Test System, MSA takes safety and technology to a whole new level.

Advanced MSA Link Pro Software

The MSA Link Pro Software is a state of the art datalogging system that allows users to analyze all data at any time. The software is easy to set up and configure to user specifications. The dashboard will provide alerts on all conditions, gas calibrations, and maintenance information (including expiration warnings). With the software, users can research data, generate reports, and send automatic email exposure alerts. Users can even generate live results or schedule emails for detector activities. Essentially, the datalogging capabilities allow worksite safety managers effectively and efficiently organize all data obtained throughout the entire gas detection fleet.

Simple User Friendly Design

The new Galaxy GX2 Automated Test System was designed with ease of use and simplicity in mind. The test system features an intuitive color touch screen for easy setup and viewing. The touch buttons are large and feature a scrolling screen with pop up test results. Simply place any compatible Galaxy gas detector onto the automated test system and the system will automatically test, calibrate, and charge. The system allows up to 10 devices and 4 cylinder holders. When using RFID-tagged gas cylinders, gas cylinder information is automatically entered into the system, and the onscreen gas cylinder pressure gauge can display multiple cylinder statuses at the same time.

Users can also see the testing and battery status of devices quickly through the colored LED indicators. With the simple time efficient automatic testing, the Galaxy GX2 Automated Test System can save users up to 50% of calibration costs.

Automated Test System Features

The Galaxy GX2 Automated Test System features 18 different languages with easy language setup options. The system is also optimized for use with MSA s high performing X-Cell Sensors. The advanced MSA X-Cell Sensor technology has a long life, quick bump test, fast calibration, and less clear times.

Galaxy GX2 Automated Test System Specifications

The Galaxy GX2 Automated Test System comes standard with pre-configured plugs, barbs, fresh air filters, spare parts kit, power supply and plug, Ethernet cable, and screen protector. MSA also offers nearly two dozen optional accessories that can be used to customize the automatic test system to meet individual workplace needs.

The automatic test system operates on 100-200 VAC (47-63 Hz). The entire unit is approximately 12 inches high and 6.5 inches wide.

The new Galaxy GX2 Automated Test System provides a simple and efficient approach to testing, calibration, and charging. With numerous user features, advanced software, optional accessories, and automatic cost reduction, the automated test system is an automatic choice for workplace safety managers.

459949 Control Flow Calibration Kit, 1.5 LPM by MSA

Two regulators in one. Designed for use with all Model RP and Econo-Cal Calibration Cylinders. Supplied with calibration tubing and special fitting.

Principles of Operation

Applications

• Agriculture
• Chemical
• Construction
• Electric Utility
• Fire Fighting
• Hazardous Materials
• Mining
• Nuclear
• Oil and Gas
• Paper Pulp

Hazards

• Combustible Atmosphere
• Confined Space
• Fire
• Oxygen Deficiency
• Toxic Atmosphere IDLH
• Toxic Atmosphere Non-IDLH

10092521 Altair Single-Gas Detector - Hydrogen Sulfide (H2S) by MSA

The MSA Altair Maintenance-Free Single-Gas Detector comes is available in variety of gas detection models including oxygen, carbon monoxide, and hydrogen sulfide. The unit is designed to notify users of gas monitoring with visual alarms of ultra-bright LED lights (which remain visibly noticeable when stored in pockets) and a screen display, distinct audible alarms of over 95 decibels, and vibrating alarms. The triple alarm system will ensure that users and those nearby are appropriately alerted to gas situations in the environment. Most notably, the alarm system is designed to alert users regardless of hearing or visual impairment.

Altair Maintenance-Free Single-Gas Detector features

Worksites interested in assessing alarm conditions and history will find the automatic internal record keeping of the device to be useful. Using MSA InfraRed communication technology, the Altair Maintenance-Free Single-Gas Detector automatically stores the last 25 alarm events. The InfraRed communication adapter allows users to adjust settings and assess alarm conditions.

Easy to use

The unit s ease of use is integral when working in potentially dangerous conditions. These low maintenance unit s are key features of the products advanced design. Long-life lithium batteries typically perform for two years or more, and are designed to outlast a two-minute alarm mode per day. This type of battery efficiency places the Altair Maintenance-Free Single-Gas Detector well above its closest competitors in longevity.

The unit allows for easy bump checks by pressing Gas Test. Once tested, the unit displays a checkmark on the screen for 24 hours. The detectors also offer built-in calibrations, as required for some worksites. For other gas response tests and bump checks, the Altair Maintenance-Free Single-Gas Detector is compatible with Altair Quick-Check Stations. These stations are another maintenance free way to ensure the quality and reliability of the industry s leading gas detection devices.

Durability

Exceeding industry standards is the norm for MSA, and those in dangerous work settings can rest assured that The Safety Company has provided the very best in gas detection technology.