Name: Modern Water EnSys RDX Explosives Soil Test Kit with Extraction Jars - 7085000
Brand: Modern Water
SKU: 7085000
Price: 1,195.50 USD

Filter Results

Brand reset

Category reset

Price Range

Items per page: Sort by:

QUICK VIEW

Modern Water Alumina-A Cartidges - 6021200

Brand: Modern Water | Item #: 6021200

$16.50

View Product Details >

Modern Water Alumina-A Cartidges - 6021200

Item #	6021200
Brand	Modern Water

Price: $16.50

Quantity:

Alumina-A Cartidges (if nitrate/nitrate interferents present)

QUICK VIEW

Modern Water EnSys TNT Explosives Soil Test Kit - 7002000

Brand: Modern Water | Item #: 7002000

$1,195.50

View Product Details >

Modern Water EnSys TNT Explosives Soil Test Kit - 7002000

Item #	7002000
Brand	Modern Water

Price: $1,195.50

Quantity:

7002000 EnSys TNT Explosives Soil Test Kit by Modern Water

EnSys® explosives kits are rapid field or laboratory colourimetric tests for the analysis of explosives in soil. The kits are based on a method developed by Dr. Thomas Jenkins at the US Army Corps of Engineers - CRREL.

Features:

Detects TNT, DNT and related explosives
Convenient and rapid testing in the field or laboratory
Extractions can be performed simultaneously with analysis in singlicate
TNT extracts can be used with EnSys RDX test
Training available
EPA SW-846 Method #8515

Test result type

Quantitative data

Samples per kit

20 soil samples

Assay range

Soil: 1 ppm to 30 ppm total TNT
Higher sample concentrations can be quantified by sample extract dilution

Sample preparation

Soil samples require prior extraction using the included extraction components
Soil samples should be dried prior to analysis
Soil sample extracts may be saved for use with the RDXsoil test kit

Sampling time

'Dirt-to-Data' in approximately 30 minutes
Typically about ten samples can be run in about 40 minutes
Soil extraction time is typically 2 - 10 minutes per sample plus test run time of approximately 2 minutes

Specificity

The EnSys® TNT test is specific for TNT and related explosive compounds and exhibits the following sensitivities. The TNT test does not measure RDX or HMX.

Basic Test Procedure

Clean cuvettes and set spectrophotometer
Extract soil sample: Weigh 10 grams of soil sample, Add sample to extraction jar, Measure 50mL acetone into 50mL tube, Pour acetone into extraction jar and shake for three minutes, Allow to settle for five minutes
Draw 25mL liquid into the syringe from above the sediment layer in extraction jar
Attach filter tip to syringe and transfer 25mL of sample extract into a cuvette.
Place cuvette in spectrophotometer and record initial absorbance
Add one drop of developer solution, cap and shake for three seconds.
Remove stopper and place the'sample' cuvette in cell holder and read sample absorbance.
NOTE: For analysis of samples containing DNT,and/or where DNT concentration is of concern, samples must be allowed to develop for 10 minutes before reading sample absorbance. This will not affect colour development for other nitroaromatics.
Record data and calculate results.

Test kit components

20 weigh boats and wooden spatulas
20 extraction jars
One 50mL graduated tube
20 - 30cc syringes and syringe filters
1 bulb pipette
1 TNT control vial and ampoule cracker
Developer solution
Test kit instructions

Storage & precautions

Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging.
Store at ambient temperature 64° to 81°F (18° to 27°C)
Operate the test at temperature greater than 40°F/4°C and less than 100°F/39°C (4°C)

Required test materials

EnSys TNT explosives soil test kit (7002000)

Required test equipment

EnSys TNT accessory kit (rental, includes HACH DR2800) (6999700)
Acetone: hardware or laboratory grade (min 50mL per sample)

Other recommended materials

Hach DR/2000, DR/2010 or DR/2800
2 matched hach cuvettes
2 cuvette stopper plugs
Balance
Tap or laboratory grade water for cuvette rinsing
Marker pen, calculator
Absorbent paper
Liquid waste container
PPE: Disposable gloves, eyewear

QUICK VIEW

Modern Water EnSys RDX Explosives Soil Test Kit with Extraction Jars - 7085000

Brand: Modern Water | Item #: 7085000

$1,195.50

View Product Details >

Modern Water EnSys RDX Explosives Soil Test Kit with Extraction Jars - 7085000

Item #	7085000
Brand	Modern Water

Price: $1,195.50

Quantity:

7085000 EnSys RDX Explosives Soil Test Kit with Extraction Jars by Modern Water

Ensys® explosives kits are rapid field or laboratory colourimetric tests for the analysis of explosives in soil. The kits are based on a method developed by Dr. Thomas Jenkins at the US Army Corps of Engineers - CRREL.

Features:

Detects RDX, HMX and related explosives
Convenient and rapid testing in the field or laboratory
Extractions can be performed simultaneously with analysis in singlicate
Can test sample extract from EnSys TNT test
Training recommended
EPA SW-846 Method #8510 (proposed status final with 4th update)

Test result type

Quantitative data

Samples per kit

20 soil samples

Assay range

Soil: 1 ppm to 30 ppm total RDX
Higher sample concentrations can be quantified by sample extract dilution

Sample preparation

Soil samples require prior extraction using the included extraction components
Soil samples should be dried prior to analysis
Soil sample extracts from TNT soil test kit may be used

Sampling time

'Dirt-to-Data' in approximately 30 minutes
Typically about six samples can be run in about one hour
Soil extraction time is typically 2 - 10 minutes per sample plus test run time of approximately 20 minutes

Specificity

The Ensys® RDX test is specific for RDX, HMX and related explosive compounds and exhibits the following sensitivities. The RDX does not measure TNT, TNB or DNB.

Basic Test Procedure

Clean cuvettes and set spectrophotometer
Extract soil sample: Weigh 10 grams of soil sample, Add sample to extraction jar, Measure 50mL acetone into 50mL tube, Pour acetone into extraction jar and shake for three minutes, Allow to settle for five minutes
Draw into syringe 5.5mL liquid from above the sediment layer in extraction jar
Attach filter tip to syringe and transfer 5mL of sample extract into a 13mL tube
NOTE: if nitrate/ nitrate interferents are present, attach an Alumina-A cartridge to the syringe and dispense through this
Cut open an acetic acid bulb and add contents to the 13mL tube. Cap and shake
Cut open a NitriVer pillow and add it to a 50mL reaction vial containing water
Quickly pour acetic acid and sample into 13 mL zinc tube and cap. Invert twice and expose sample to zinc for EXACTLY 15 seconds
With the filter attached to syringe and plunger removed, hold over reaction vial and pour zinc solution into it
Rapidly filter the solution into the 50mL reaction vial, cap and shake for 30 seconds
Incubate for 15 minutes for colour development and transfer contents to 30mL syringe barrel. Attach syringe filter and dispense into spectrophotometer cuvette
Place cuvette in spectrophotometer and record absorbance
Calculate results

Test kit components

20 weigh boats and wooden spatulas
20 extraction jars
One 50mL graduated tube
20 - 50mL reaction vials with H2O
20 - 13mL zinc tube in foil pouches
20 - 10cc, 20cc and 30cc syringes
20 - 30mL tubes
20 NitriVer pillows
20 acetic acid bulb pipettes
60 syringe filters
1 bulb pipette
1 RDX control vial and ampoule cracker
Test kit instructions

Storage & precautions

Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging.
Store kits at room temperature (less than 80°F (27°C))
Operate the test at temperature greater than 40°F/4°C and less than 100°F/39°C
Do not expose the kits to direct sunlight