Milwaukee

pH54 pH Waterproof Tester, Unit comes with, 2 Points Manual Calibration by Milwaukee

The Milwaukee Waterproof pH54 Tester is one of our most accurate low cost, rugged and reliable pH testers in the market featuring the ability to easily replace the probe providing for years of carefree use. It's simple 2 point manual calibration is simple-to-use. Ideal for use in aquariums, hydroponics, horticulture, education and many other applications.

The Milwaukee Waterproof pH54 pH tester offers:

ACCURACY

The Waterproof pH54 tester is accurate to ±0.1 pH and is easy to read.

With easy 2 point manual calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results.

LONG LIFE

The tester comes with a replaceable pH probe with a double junction probe designed for longer life.

FAST RESPONSE

The probe is double junction allowing quick, accurate pH readings and respose times.

WATERPROOF CONSTRUCTION

No more worries about dropping your tester while measuring. The pH54 is waterproof to IP65.

LIGHT WEIGHT

At just 3.5 ounces, the pH54 is easy to handle at up to half the weight of other testers.

EASE-OF-USE

A large LCD screen makes reading results easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper.

DESIGN FEATURES

• Fast easy to read results with large digital LCD readout.
• Extreme pH accuracy to ±0.1 pH with a pH range (0.00 pH to 14.00 pH).
• Extra Resolution to 0.01 pH.
• Lightweight and portable.
• Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.
• Simple manual one or two-point calibration.
• Gel-filled, double junction pH electrode for low maintenance and high performance.
• Fully waterproof to IP65.
• Over 1500 hours of continious battery life (batteries included).
• Replaceable pH electrode MA73600.

CARE AND USE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

Here are our top four tips.
1. Always store with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Tester in the sample for a faster result.

pH55 Pocket-size pH / Temperature Meter with Replaceable Electrode by Milwaukee

Waterproof pH testers with Large dual-level LCD that displays pH and temperature (°C or °F).

The large display shows readings in an extended range from -2.0 to 16.0 pH (pH56 has a 0.01 pH resolution) and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F.

They have a stability indicator and hold function that freezes the display for easy and accurate recording.

The large display also has graphic symbols to guide you through all operations.

Complete with a temperature probe for faster and more precise temperature measurement they compensate automatically for temperature.

Calibration is made automatically in 1 or 2 points with memorized standard and NIST buffer sets. Auto power OFF saves battery power after non-use.

The double-junction electrode can be replaced in a very fast and simple way! The modular design allows easy electrode and battery replacement.

pH56 Pocket-size pH / Temperature Meter with Replaceable Electrode by Milwaukee

Waterproof pH testers with Large dual-level LCD that displays pH and temperature (°C or °F).

The large display shows readings in an extended range from -2.0 to 16.0 pH (pH56 has a 0.01 pH resolution) and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F.

They have a stability indicator and hold function that freezes the display for easy and accurate recording.

The large display also has graphic symbols to guide you through all operations.

Complete with a temperature probe for faster and more precise temperature measurement they compensate automatically for temperature.

Calibration is made automatically in 1 or 2 points with memorized standard and NIST buffer sets. Auto power OFF saves battery power after non-use.

The double-junction electrode can be replaced in a very fast and simple way! The modular design allows easy electrode and battery replacement.

pH58 Pocket-size pH / ORP / Temperature Meter with Replaceable Electrode by Milwaukee

Combination waterproof testers with advanced functions also include the new model pH58 for simultaneous pH and ORP measurements and temperature, which is continuously displayed on the dual level LCD.

It shows readings in an extended range from -2.00 to 16.00 pH or ±1000 mV and simultaneously shows temperature from -5.0 to 105.0°C or 23 to 221°F.

The pH58 has a stability indicator and hold feature that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations.

Calibration is performed automatically at 1 or 2 points using standard or NIST buffers.

The modular design allows easy electrode and battery replacement.

pH600-AQ pH Economical Pocket Tester with 1 Point Manual Calibration by Milwaukee

Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH, EC or TDS values.

Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions.

All EC/TDS testers compensate for the temperature variance automatically.

The pH600 is a pH tester specifically designed for the aquarium market. The calibration procedure is very simple and fast. This tester has 1 point manual calibration, ±0.1 pH accuracy and a range of 0.0 to 14.0 pH. The pH600 is supplied in a blister packaging complete with calibration screwdriver, batteries and instructions.

pH600-BOX pH Economical Pocket Tester with 1 Point Manual Calibration by Milwaukee

Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH, EC or TDS values.

Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions.

All EC/TDS testers compensate for the temperature variance automatically.

The pH600 is a pH tester can be used in many different applications and is considered an excellent starter unit for digital pH measurement. The calibration procedure is very simple and fast. This tester has 1 point manual calibration, ±0.1 pH accuracy and a range of 0.0 to 14.0 pH. The pH600 is supplied in a snap over "oyster shell" plastic packaging complete with calibration screwdriver, 20 ml of 7.01 calibration solution, batteries and instructions.

T75 Waterproof TDS Tester with Replaceable Electrode (low range) by Milwaukee

These instruments are designed for all applications. It's IP65 Waterproof casing and double junction (for pH) replaceable electrode make them suitable also for heavy duty applications, such as Waste Water treatment and Agriculture. The modular design allows easy electrode and battery replacement.

The T75 is a waterproof TDS tester (for fresh water) with automatic temperature compensation, 1 point manual calibration and a range of 0 to 1999 ppm (mg/L). The tester has a replaceable electrode and is supplied complete with sachets of calibration solution, leather casing and calibration screwdriver.

T76 Waterproof TDS Tester with Replaceable Electrode (high range) by Milwaukee

These instruments are designed for all applications. It's IP65 Waterproof casing and replaceable electrode make them suitable also for heavy duty applications, such as Waste Water treatment and Agriculture. The modular design allows easy electrode and battery replacement.

All Waterproof testers are supplied in a leather casing complete with calibration solution, batteries, instruction manual and screwdriver for calibration.

The T76 is a waterproof TDS tester with automatic temperature compensation, 1 point manual calibration and a range of 0 to 9999 ppm (mg/L). The tester has a replaceable electrode and is supplied complete with sachets of calibration solution, leather casing and calibration screwdriver.

TH300 Thermometer complete with penetration probe and 1 meter cable by Milwaukee

Thousands of people have relied on the Milwaukee TH300 compact Digital Temperature Meter to read temperature in difficult areas with it's flexible 1 meter cable and stainless steel probe. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries and wineries the TH300 is your quick temperature meter.

SUMMARY

The Milwaukee TH300 compact digital thermometer is specifically designed to help professionals and home owners regulate their pools, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.

WHAT PEOPLE ARE SAYING

"Accurate results and calibrated right out of the box."
"Must have for any aquarium owner."
"Good value. Easy to use. Consistent."
"No dangerous chemicals"
"Used it in the field for checking the fruit to harvest, was great"

DESIGN FEATURES

• Fast, accurate results with large digital LCD readout.
• Extended temperature range: -50 to 150°C (-58 to 302°F)
• Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.
• Easy, flexible 1 meter cable for hard to reach places.
• Stainless Steel pointed probe for easy fruit penetration and easy cleaning.
• Long battery life, approx. 1 year. (batteries included)
• High accurate digital readings.

Clean and Safety

Here are our top four tips.
1. Always clean you stainless steel probe after use.
2. Pay close attention to the direction of the probe's sharp tip.
3. If the LCD begins to fade, change your batteries.
4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.

TH310 Stick Thermometer with stainless steel probe and Calibration Check feature by Milwaukee

Thousands of people have relied on the Milwaukee TH310 compact Digital Temperature Meter to read temperature in all types of applications. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries, wineries and labs the TH310 Stainless Steel Stick probe is your quick temperature meter.

SUMMARY

The Milwaukee TH310 compact digital thermometer is specifically designed to help professionals and home owners regulate their home brew, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.

WHAT PEOPLE ARE SAYING

"Accurate results and calibrated right out of the box."
"Must have for any aquarium owner."
"Good value. Easy to use. Consistent."
"No dangerous chemicals"
"Used it in the field for checking the fruit to harvest, was great"

DESIGN FEATURES

• Fast, accurate results with large digital LCD readout.
• Extended temperature range: -50 to 150°C (-58 to 302°F).
• Cal-Check feature.
• Fast NTC sensor response.
• Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.
• Easy sharp Stainless Steel temperature shaft for quick penetration.
• Stainless Steel probe for easy cleaning.
• Long battery life, approx. 3000 hours of continuous use (batteries included).
• High accurate digital readings.

Clean and Safety

Here are our top four tips.
1. Always clean you stainless steel probe after use.
2. Pay close attention to the direction of the probe's sharp tip.
3. If the LCD begins to fade, change your batteries.
4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.