Milwaukee

MW100 Standard Portable pH Meter with 0.1 pH Resolution by Milwaukee

Standard portable meters with no frills! Milwaukee's durable meters for quick and reliable measurements.

Milwaukee's Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.

MW100 performs pH measurements with a 0.1 pH resolution and with manual temperature compensation. The meter is supplied with pH electrode and calibration solutions.

MW101 Standard Portable pH Meter with 0.01 pH Resolution by Milwaukee

Standard portable meters with no frills! Milwaukee's durable meters for quick and reliable measurements.

Milwaukee's Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.

MW101 performs pH measurements with a 0.01 pH resolution and with manual temperature compensation. The meter is supplied with pH electrode and calibration solutions.

MW102-FOOD PRO+ 2-in-1 pH and Temperature Meter for Food by Milwaukee

FOOD PH METER. LAB GRADE. HIGH PERFORMANCE. TOUGH.

The Milwaukee MW102 PRO+ Food pH meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and accuracy. The MW102 Food pH meter combines the power of the MW102 meter with the specialist capabilities of the MA920B/1 Direct Measurement Food Grade pH Probe.

WHAT PEOPLE ARE SAYING

"Amazingly accurate, the best meter I have used so far."
"Very satisfied, very accurate, rugged device that calibrates easily."
"Rarely needs to be calibrated and gives perfect readings every time."
"Killer tool, good value."

SUMMARY

The Milwaukee PRO+ pH Meter is a specialist food pH meter and probe combination specifically designed for the pH analysis of semi-solid foods such as processed meats, soft cheeses, soups, sauces, and sushi rice.

The Milwaukee PRO pH meter offers:

ACCURACY

People choose the PRO+ pH Meter to improve the accuracy of their pH testing program. With two point calibration, the meter can be quickly calibrated to a higher accuracy compared with one point calibration. The MW102 meter has accuracy to ± 0.02 pH. 5x more accurate than some alternative meters.

The meter comes with both a pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature.

The temperature probe can also be used as a very accurate thermometer.

TOUGHNESS

The rugged meter is built to take knocks.

SPECIALIZED DESIGN FOR PH ANALYSIS IN FOOD

MA920 food probe features include an open junction design that reduces clogging from suspended solids and proteins found in food and dairy products for a more stable pH measurement and reduced maintenance.

The probe also has a conical shaped tip design which allows for penetration into solids, semi solids, and emulsions for the direct measurement of pH in a variety of food products.

In addition, the body is constructed from polyvinylidene fluoride (PVDF). PVDF is a food grade plastic that is resistant to most chemicals and solvents used for disinfection in the food sector, including chlorine (bleach).

DESIGN FEATURES

• Fast easy to read results with large digital LCD readout
• Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)
• Lightweight and portable
• Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
• Simple push button, automatic two-point calibration for increased accuracy
• Food grade electrode with a rugged, easy-to-clean, PVDF body, a conical tip for use with semi solids with a screw on cap to ensure proper storage
• Rugged stainless temperature probe
• 3 feet probe cables for extra flexibility when testing
• Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)

CARE AND USE

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

SENSING BULB

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

REFERENCE JUNCTION

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

CLEANING AND STORAGE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

STORAGE

The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

CLEANING

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.

CALIBRATION

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage.

MW105 pH Portable Meter by Milwaukee

The Milwaukee MW105 MAX Waterproof 3-in-1 pH/OPR/Temp. meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and IP67 Waterproof rating. Accurate to ± 0.02 pH with automatic or manual temperature compensation, and built in GLP key. Ideal for use by brewers, wine makers, growers, labs, food processing, water treatment and many other applications with challenging pH measurement needs.

WHAT PEOPLE ARE SAYING

• "Amazingly accurate, the best meter I have used so far."
• "Very satisfied, very accurate, rugged device that calibrates easily."
• "Rarely needs to be calibrated and gives perfect readings every time."
• "Killer tool, good value."
• "Love the GLP function."
• "Easy to Clean."

SUMMARY

The Milwaukee MW105 MAX Waterproof 3-in-1 pH/ORP/Temp Meter is preferred by people testing samples in viscus applications that cause other pH testers and meters to fail. From brewers and wine makers to hydroponic growers and farmers the MW105 is your meter for fast, accurate readings.

The Milwaukee PRO pH meter offers:

ACCURACY

People choose the MW105 MAX Waterproof 3-in-1 pH/ORP/Temp Meter to improve the accuracy of their testing program. With up to 3 point calibration and 7 standard buffer choices, the meter can be quickly calibrated to a higher accuracy compared with one or two point calibration. The MW105 meter is accurate to ± 0.02 pH. 5x more accurate than some alternative meters.

The meter comes with an amplified, combination pH probe with a built in temperature sensor allowing the meter to automatically adjust the pH reading for the effect of temperature.

The meter can also be used as a very accurate thermometer with accuracy +/-0.5°C (+/1°C outside) | +/-1°F (+/-2°F outside)

TOUGHNESS

The rugged meter is built to take knocks and is IP67 Waterproof rated.

LOW MAINTENACE

The MW105 MAX Waterproof pH/OPR/Temp meter comes with the Milwaukee amplified MA906BR/1 combination pH/Temp sensor. This is Milwaukee's top selling field grade electrode with lab grade performance for a reason. Designed to be both low maintenance (gel filled) and able to withstand more challenging samples (double junction). The MA906BR/1 is ideal for use in beer making, winemaking and hydroponics and many other applications.

DESIGN FEATURES

• Fast easy to read results with large duel level digital LCD readout.
• Extreme accuracy to ±0.02 pH | +/-0.5°C (+/1°C outside) | +/-1°F (+/-2°F outside).
• Extended range (-2.00 pH to 20.00 pH).
• Lightweight and portable, IP67 rated.
• Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.
• Simple push button, automatic up to 3 point calibration for increased accuracy.
• Gel-filled, double junction, amplfied, rugged field design, with lab grade performance. MA906BR/1 pH electrode is low maintenance with high accurate results and has a screw on cap to ensure proper storage.
• Built in temperature sensor.
• Battery life aprox. 200 hour (battery included).
• Auto shut off feature to preserve battery energy.
• Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages.
• Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).
• 3 feet probe cables for extra flexibility when testing.

CARE AND USE

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

SENSING BULB

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

REFERENCE JUNCTION

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

CLEANING AND STORAGE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

STORAGE

The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

CLEANING

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.

CALIBRATION

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage.

MW106 pH /ORP/Temp Combined Portable Meter by Milwaukee

The Milwaukee MW106 MAX Waterproof 3-in-1 pH/OPR/Temp. Logging Portable Meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and IP67 Waterproof rating. Accurate to ± 0.002 pH with automatic or manual temperature compensation, and built in GLP key. Ideal for use by brewers, wine makers, growers, labs, food processing, water treatment and many other applications with challenging pH measurement needs.

WHAT PEOPLE ARE SAYING

• "Amazingly accurate, the best meter I have used so far."
• "Very satisfied, very accurate, rugged device that calibrates easily."
• "Rarely needs to be calibrated and gives perfect readings every time."
• "Killer tool, good value."
• "Love the GLP function."
• "Easy to Clean."

SUMMARY

The Milwaukee MW106 MAX Waterproof 3-in-1 pH/ORP/Temp Portable Logging Meter is preferred by people testing samples in viscus applications that cause other pH testers and meters to fail. The easy-to-use logging feature allows data collection without messy notes and errors. From brewers and wine makers to hydroponic growers and farmers the MW106 MAX is your meter for fast, accurate readings.

The Milwaukee MW106 MAX Waterproof 3-in-1 meter offers:

ACCURACY

People choose the MW106 MAX Waterproof 3-in-1 pH/ORP/Temp Portable Logging Meter to improve the accuracy of their testing program. With up to 5 point calibration and 7 standard buffer choices (and two custom), the meter can be quickly calibrated to a higher accuracy compared with one or two point calibration. The MW106 MAX meter is accurate to ± 0.002 pH. 8x more accurate than some alternative meters.

The meter comes with an amplified, combination pH probe with a built in temperature sensor allowing the meter to automatically adjust the pH reading for the effect of temperature (ATC).

The meter can also be used as a very accurate thermometer with accuracy +/-0.5°C (+/-1°F)

TOUGHNESS

The rugged meter is built to take knocks and is IP67 Waterproof rated.

LOW MAINTENACE

The MW106 MAX Waterproof pH/OPR/Temp Portable Logging Meter comes with the Milwaukee amplified MA906BR/1 combination pH/Temp sensor. This is Milwaukee's top selling field grade electrode with lab grade performance for a reason. Designed to be both low maintenance (gel filled) and able to withstand more challenging samples (double junction). The MA906BR/1 is ideal for use in beer making, winemaking and hydroponics and many other applications.

DESIGN FEATURES

• Fast easy to read results with large duel level digital LCD readout.
• Extreme accuracy to ±0.002 pH | +/- 1 mV OPR | +/- 0.5°C (+/-1°F).
• Extended range (-2.00 pH to 20.00 pH / -2.000 to 20.000 pH).
• Lightweight and portable, IP67 rated.
• Simple easy-to-use logging and USB download functions ,manual or on demand up to 1,000 logs.
• Electrode diagnostics feature checks and displays the condition of the pH electrode.
• Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.
• Simple push button, automatic up to 5 point calibration for increased accuracy.
• Gel-filled, double junction, amplfied rugged field design. MA906BR/1 pH electrode is low maintenance with high accurate results and has a screw on cap to ensure proper storage.
• Built in temperature sensor.
• 3 x 1.5V akaline batteries with 200 hours battery life (battery included).
• Auto shut-off feature to preserve battery energy.
• Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages.
• Internal clock date to keep track of different time-dependent. functions (calibration, timestamp,calibration time out).
• 3 feet probe cables for extra flexibility when testing.

CARE AND USE

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

SENSING BULB

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

REFERENCE JUNCTION

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

CLEANING AND STORAGE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

STORAGE

The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

CLEANING

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.

CALIBRATION

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage.

MW11 Total Chlorine Mini-Colorimeter by Milwaukee

The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.They work exactly the same way as the other Milwaukee photometers:

When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result.

The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products.

MW12 Phosphate (Low Range) Mini-Colorimeter by Milwaukee

The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.They work exactly the same way as the other Milwaukee photometers:

When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result.

The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products.

MW13 Iodine Mini-Colorimeter by Milwaukee

The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.They work exactly the same way as the other Milwaukee photometers:

When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result.

The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products.

MW14 Iron (High Range) Mini-Colorimeter by Milwaukee

The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.They work exactly the same way as the other Milwaukee photometers:

When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result.

The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products.

MW150US pH/°C Combined Bench Meter by Milwaukee

The Milwaukee MW150 MAX 3-in-1 pH/OPR/Temp. Bench Meter has won fans around the world with its reliable, fast, simple operation as well as a tough, sleek, lightweight design with a small lab space footprint. It is accurate to ± 0.01 pH with automatic or manual temperature compensation, and built in dedicated GLP key. In addition, up to 3-point automatic calibration and 7 selectable buffer standards makes the MW150 MAX ideal for use by brewers, wine makers, growers, labs, food processing, water treatment and many other applications with challenging pH measurement needs.

WHAT PEOPLE ARE SAYING

• "Amazingly accurate, the best meter I have used so far."
• "Very satisfied, very accurate, rugged device that calibrates easily."
• "Rarely needs to be calibrated and gives perfect readings every time."
• "Killer tool, good value."
• "Takes up hardly any space in the lab."
• "Love the GLP function."
• "Large easy-to-read dual displays."
• "Easy to Clean."

SUMMARY

The Milwaukee MW150 MAX 3-in-1 PRO pH/ORP/Temp Bench Meter is preferred by people testing all types of samples viscus or not, in a variety of applications that cause other pH meters and electrodes to fail. The MA917B/1 Milwaukee double junction electode is refillable and easy to clean. From brewers and wine makers to hydroponic growers, labs and water treatment, the MW150 MAX is your Bench Meter for fast, accurate readings.

The Milwaukee MW150 MAX pH Bench Meter offers:

ACCURACY

People choose the MW150 MAX 3-in-1 pH/ORP/Temp Meter to improve the accuracy of their testing program. With up to 3 point calibration and 7 standard buffer choices, the meter can be quickly calibrated to a higher accuracy compared with 1 or 2 point calibration. The MW150 MAX Bench Meter is accurate to ± 0.01 pH. 5x more accurate than some alternative meters.

The meter comes with a double junction pH electrode (included) and temperature sensor MA831R (included) allowing the meter to automatically adjust the pH reading for the effect of temperature (ATC).

The meter can also be used as a very accurate thermometer with accuracy +/-0.4°C | +/-0.8°F.

TOUGHNESS

The rugged meter is built to take knocks and is sleek and lightweight.

LOW MAINTENACE

The MW150 MAX pH/OPR/Temp Bench Meter comes with the Milwaukee refillable glass MA917B/1 pH electrode and has a BNC connector allowing easy interchange to any pH Milwaukee electrode. This is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (refillable) and able to withstand more challenging samples (double junction). The MA917B/1 is ideal for use in beer making, winemaking and hydroponics, environmental labs and many other applications.

DESIGN FEATURES

• Fast easy to read results with large duel level digital LCD readout.
• Extreme accuracy to ±0.01 pH | +/-0.4°C | +/-0.8°F.
• Extended range (-2.00 pH to 20.00 pH).
• Lightweight and small bench footprint.
• Easy measurement: just place the pH electrode and temp. probe in the sample, gently stir and wait for the reading to stabilize.
• Simple push button, automatic up to 3 point calibration for increased accuracy.
• Up to 7 selectable pH calibration buffers (1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45).
• Refillable, double junction, lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage.
• Automatic Temperature compensation (ATC).
• Built-in rechargeable battery with 8 hours battery life (battery included).
• Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages.
• Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).
• Dedicated GLP key function.
• 3 feet probe cables for extra flexibility when testing.

CARE AND USE

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

SENSING BULB

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

REFERENCE JUNCTION

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

CLEANING AND STORAGE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

STORAGE

To minimize clogging the pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water or DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

CLEANING AN MAINTENANCE

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution. Also:

1. Inspect the electotrode for damage or scratches, if present replace the electrode.
2. Inspect the cable. The connection cable and insulation must be intact.
3. Connectors should be clean and dry.
4. Rinse off salt deposits with water or DI water.

CALIBRATION

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus Bench pH Meter accurate. Also, calibrate after cleaning or a long period of storage.

MW151US pH/ORP/°C Combined Bench Meter by Milwaukee

The Milwaukee MW151 MAX 3-in-1 pH/OPR/Temp. Logging Portable Bench Meter has won fans around the world with its reliable, fast and simple operation as well as its tough, sleek design with a small lab footprint. The MW151 MAX is accurate to ± 0.002 pH with automatic or manual temperature compensation with a built in dedicated GLP key. Ideal for use by brewers, wine makers, growers, labs, food processing, water treatment and many other applications with challenging pH measurement needs.

WHAT PEOPLE ARE SAYING

• "Amazingly accurate, the best meter I have used so far."
• "Very satisfied, very accurate, rugged device that calibrates easily."
• "Rarely needs to be calibrated and gives perfect readings every time."
• "Killer tool, good value."
• "Logging data is easy-to-use and download."
• "Love the GLP function."
• "Easy to Clean."
• "Love the 7 buffer choices and the 2 custom. It makes my job easier and more accurate."

SUMMARY

The Milwaukee MW151 MAX 3-in-1 PRO pH/ORP/Temp Bench Logging Meter is preferred by people testing all types of samples viscus or not, in a variety of applications that cause other pH meters and electrodes to fail. The logging feature allows log-on-demand and log-on-stability features that ensure all readings are accurate and not entered incorrectly. The MA917B/1 Milwaukee double junction electode is refillable and easy to clean. From brewers and wine makers to hydroponic growers, labs and water treatment, the MW151 MAX is your Bench Logging Meter for fast, accurate readings.

The Milwaukee MW151 MAX pH Bench meter offers:

ACCURACY

People choose the MW151 MAX 3-in-1 PRO pH/ORP/Temp Portable Logging Meter to improve the accuracy of their testing program. With up to 5 point calibration and 7 standard buffer choices (2 custom buffers also), the meter can be quickly calibrated to a higher accuracy compared with one or two point calibration. The MW151 MAX meter is accurate to ± 0.002 pH. 8 x more accurate than some alternative meters.

The meter comes with a refillable, glass, double junction pH electrode and MA831R temperature sensor allowing the meter to automatically adjust the pH reading for the effect of temperature (ATC).

The meter can also be used as a very accurate thermometer with accuracy +/-0.4°C (+/-0.8°F).

TOUGHNESS

The rugged meter is built to take knocks, has a sleek design and a small benchtop footprint.

LOW MAINTENACE

The MW151 MAX pH/OPR/Temp Bench Logging Meter comes with the Milwaukee glass, double junction MA917B/1 pH electrode. This is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (refillable) and able to withstand more challenging samples (double junction). The MA917B/1 is ideal for use in beer making, winemaking, hydroponics, laboratories and many other applications.

DESIGN FEATURES

• Fast easy-to-read results with large duel level digital LCD readout.
• Extreme accuracy to ±0.002 pH | +/- 1 mV OPR | +/- 0.4°C (+/-0.8°F).
• Extended pH range (-2.00 pH to 20.00 pH / -2.000 to 20.000 pH).
• Lightweight, sleek design with small benchtop footprint.
• Simple easy-to-use logging and USB download functions, manual or on stability up to 1,000 logs.
• Electrode diagnostics feature checks and displays the condition of the pH electrode.
• Easy measurement: just place the electode and temperature probe in the sample, gently stir and wait for the reading to stabilize.
• Simple push button, automatic up to 5 point calibration for increased accuracy.
• Up to 7 Standard calibration solutions (1.68, 4.01, 6.86,7.01, 9.18, 10.01 and 12.45) and 2 custom choices.
• Refillable, glass, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage.
• Built-in rechargeable battery with 8 hours battery life (battery included).
• Selectable Auto-off feature.
• Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages.
• Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).
• 3 feet probe cables for extra flexibility when testing.

CARE AND USE

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

SENSING BULB

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

REFERENCE JUNCTION

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

CLEANING AND STORAGE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH electrode will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

STORAGE

To minimize clogging the pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

CLEANING AN MAINTENANCE

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution. Also:

1. Inspect the electotrode for damage or scratches, if present replace the electrode.
2. Inspect the cable. The connection cable and insulation must be intact.
3. Connectors should be clean and dry.
4. Rinse off salt deposits with water or DI water.

CALIBRATION

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage.

MW160US pH/ORP/ISE/°C Combined Data Logging Bench Meter by Milwaukee

The Milwaukee MW160 4-in-1 MAX pH/OPR/ISE/Temp. Logging Bench Meter has won fans around the world with its reliable, fast, simple operation as well as a tough, sleek, lightweight design with a small lab space footprint. It is cccurate to ±0.01 pH with automatic or manual temperature compensation, and built in dedicated GLP key. In addition, up to 3-point automatic calibration and 7 selectable buffer standards makes the MW160 MAX ideal for use by brewers, wine makers, growers, labs, food processing, water treatment and many other applications with challenging pH measurement needs.

WHAT PEOPLE ARE SAYING

• "Amazingly accurate, the best meter I have used so far."
• "Very satisfied, very accurate, rugged device that calibrates easily."
• "Rarely needs to be calibrated and gives perfect readings every time."
• "Killer tool, good value."
• "Takes up hardly any space in the lab"
• "Love the GLP function"
• "Large easy-to-read dual displays"
• "Easy to Clean"

SUMMARY

The Milwaukee MW160 4-in-1 MAX pH/ORP/ISE/Temp Logging Bench Meter is preferred by people testing all types of samples viscus or not, in a variety of applications that cause other pH meters and electrodes to fail. The MA917B/1 Milwaukee double junction electode is refillable and easy to clean. From brewers and wine makers to hydroponic growers, labs and water treatment, the MW160 MAX is your Bench Meter for fast, accurate readings.

The Milwaukee MW160 MAX pH Bench Meter offers:

ACCURACY

People choose the MW160 4-in-1 MAX pH/ORP/ISE/Temp Logging Meter to improve the accuracy of their testing program. With up to 3 point calibration and 7 standard buffer choices, the meter can be quickly calibrated to a higher accuracy compared with 1 or 2 point calibration. The MW160 MAX meter is accurate to ±0.01 pH. 5x more accurate than some alternative meters. Have a need to read ISE? The MW160 MAX has a simple BNC connection for any parameter.

The meter comes with a double junction pH electrode (included) and temperature sensor MA831R (included) allowing the meter to automatically adjust the pH reading for the effect of temperature (ATC).

The meter can also be used as a very accurate thermometer with accuracy +/-0.4°C | +/-0.8°F.

TOUGHNESS

The rugged meter is built to take knocks and is sleek and lightweight.

LOW MAINTENACE

The MW160 MAX pH/OPR/ISE/Temp Logging Bench Meter comes with the Milwaukee refillable glass MA917B/1 pH electrode and has a BNC connector allowing easy interchange to any pH Milwaukee electrode. This is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (refillable) and able to withstand more challenging samples (double junction). The MA917B/1 is ideal for use in beer making, winemaking and hydroponics, environmental labs and many other applications. Have a need for an ISE application? Quickly connect the ISE BNC to the meter and off you go.

DESIGN FEATURES

• Fast easy to read results with large duel level digital LCD readout.
• Extreme accuracy to ±0.01 pH | +/- 0.2 mv | +/- 1 mV | ISE +/-0.5% Full Scale | +/-0.4°C (+/-0.8°F).
• Extended range (-2.00 pH to 16.00 pH).
• Lightweight and small bench footprint.
• ISE calibration up to 2 points.
• Easy measurement: just place the pH electrode and temp. probe in the sample, gently stir and wait for the reading to stabilize.
• Simple push button, automatic up to 3 point pH calibration for increased accuracy.
• Up to 7 selectable pH calibration buffers (4.01, 6.86, 7.01, 9.18, 10.01 and 12.45).
• Refillable, double junction, lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage.
• Automatic Temperature compensation (ATC).
• Logging-on-Demand feature up to 50 samples per parameter.
• Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages
• Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).
• Dedicated GLP key function.
• 3 feet probe cables for extra flexibility when testing

CARE AND USE

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

SENSING BULB

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

REFERENCE JUNCTION

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

CLEANING AND STORAGE

All pH/ORP sensors have a limited life and response time gets longer with age. Properly maintaining your pH/ORP electrode will give you fast, accurate results for longer. So, be sure to order the Milwaukee Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

STORAGE

To minimize clogging the pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water or DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

CLEANING AN MAINTENANCE

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016. Also:

1. Inspect the electotrode for damage or scratches, if present replace the electrode.
2. Inspect the cable. The connection cable and insulation must be intact.
3. Connectors should be clean and dry.
4. Rinse off salt deposits with water or DI water.

CALIBRATION

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus Bench pH Meter accurate. Also, calibrate after cleaning or a long period of storage.

MW170US Combined Logging, GLP, EC/TDS/NaCl/Temp Combined Data Logging Bench Meter by Milwaukee

The Milwaukee MW170 4-in-1 MAX EC/TDS/NaCl/Temp. Logging Bench Meter has won fans around the world with its reliable, fast and simple operation as well as its tough, sleek design and small benchtop footprint. It is accurate to ± 1% of reading for EC/TDS & Salinity with automatic, manual or no temperature compensation and a built in dedicated GLP key. Ideal for use by education, horticulture, labs, food processing, water treatment and many other applications with challenging EC/TDS/NaCL/Temp. measurement needs.

WHAT PEOPLE ARE SAYING

• "Amazingly accurate, the best meter I have used so far."
• "Very satisfied, very accurate, rugged device that calibrates easily."
• "Rarely needs to be calibrated and gives perfect readings every time."
• "Killer tool, good value."
• "Logging data is easy-to-use and download"
• "Love the GLP function"
• "Logging functions increase the reliability of the data"
• "Easy to Clean"

SUMMARY

The Milwaukee MW170 4-in-1 MAX EC/TDS/NaCl/Temp Bench Logging Meter is preferred by people testing samples in various applications. The easy-to-use logging feature allows data collection without messy notes and errors. From aquaculture, environmental, research to educators, the MW170 MAX is your meter for fast, accurate readings.

The Milwaukee MW170 MAX EC/TDS/NaCl/Temp. Bench meter offers:

ACCURACY

People choose the MW170 4-in-1 MAX EC/TDS/NaCl/Temp Bench Logging Meter to improve the accuracy of their testing program. With easy 1 point EC calibration, 6 standard buffer choices and 2 point temperature calibration, the meter can be quickly calibrated to a higher temperature accuracy compared to other meters and it provides more accurate temperature compensation readings than a one point calibration. The MW170 MAX Bench Meter is accurate to ± 1% of reading for EC/TDS and NaCL.

The meter comes with MA814DB/1 (4 ring) conductivity probe with a built in temperature sensor allowing the meter to automatically adjust the EC/TDS/NaCl reading for the effect of temperature (ATC).

The meter can also be used as a very accurate thermometer with accuracy +/-0.5°C (+/-0.9°F)

TOUGHNESS

The rugged meter is built to take knocks and has a sleek design that includes a small benchtop footprint.

LOW MAINTENACE

The MW170 MAX EC/TDS/NaCl/Temp Bench Logging Meter comes with the Milwaukee MA814DB/1 combination EC/Temp sensor. This is Milwaukee's top selling lab grade EC probe for a reason. Designed to be both low maintenance and able to withstand more challenging samples. The MA814DB/1 is ideal for use in horticulture, aquaculture, environmental labs, water treatment/conditioning and many other applications.

DESIGN FEATURES

• Fast easy to read results with large duel level digital LCD readout.
• Extreme accuracy to 1% of reading for EC/TDS/NaCl |+/- 0.5°C (+/-0.9°F).
• Extended auto-ranging feature for EC/TDS/NaCl.
• Lightweight, sleek design featuring a small benchtop footprint.
• Simple easy-to-use logging; manual log-on-demand or manual log-on-stability up to 1,000 records.
• Micro USB Port download functions.
• GLP data, date and time.
• Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.
• Single cell factor calibration for EC/TDS/NaCl, automatic simple one point calibration and two point for temperature allowing increased accuracy.
• Rugged low maintenance, high performance, easy-to-clean EC/TDS/NaCL/Temp probe.
• Built in temperature sensor.
• Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).
• 3 feet probe cables for extra flexibility when testing.
• Includes MA9315 electrode holder, cables, adapter and probe.

CARE, USE AND CLEANING

EC meters usually start performing poorly because of problems with the sediment on the conductivity probe's rings. The dirty rings on the probe can change impedance. Cleaning the rings is simple. Slide the plastic shield off and clean with DI water and soft cloth to keep your readings accurate.

STORAGE

When not in use, store the meter and probe in a safe area to avoid damage. The EC probe is stored dry.

REFERENCE JUNCTION

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

CLEANING AND STORAGE

All pH/ORP sensors have a limited life and response time gets longer with age. Properly maintaining your pH/ORP electrode will give you fast, accurate results for longer. So, be sure to order the Milwaukee Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

STORAGE

To minimize clogging the pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water or DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

CALIBRATION

The MW170 MAX is easy 1 point EC/TDS/NaCl calibration for ease-of-use and two point temperature calibration for best accuracy in (ATC). Calibrating regularly is best to keep your PRO MW170 4-in-1 MAX Bench meter accurate for all your readings.

MW180US Combined Logging, GLP,pH/ORP/EC/TDS/NaCl/Temp Combined Data Logging Bench Meter by Milwaukee

The Milwaukee MW180 5-in-1 MAX pH/ORP/EC/TDS/NaCl/Temp. Logging Bench Meter has won fans around the world with its reliable, fast and simple operation as well as its tough, sleek design and small benchtop footprint. It is accurate to ± 1% of reading for EC/TDS/NaCl and up to +/-0.002 pH, with automatic or manual temperature compensation and a built in dedicated GLP key. Ideal for use by education, horticulture, labs, food processing, water treatment and many other applications with challenging pH/ORP/EC/TDS/NaCl/Temp. measurement needs.

WHAT PEOPLE ARE SAYING

• "Amazingly accurate, the best meter I have used so far."
• "Very satisfied, very accurate, rugged device that calibrates easily."
• "Rarely needs to be calibrated and gives perfect readings every time."
• "Killer tool, good value."
• "Logging data is easy-to-use and download."
• "Love the GLP function."
• "Logging functions increase the reliability of the data."
• "Easy to Clean."

SUMMARY

The Milwaukee MW180 5-in-1 MAX pH/ORP/EC/TDS/NaCl/Temp. Bench Logging Meter is preferred by people testing samples in various applications. The easy-to-use logging feature allows data collection without messy notes and errors. From aquaculture, environmental, research to educators, the MI180 MAX is your cost effective meter for fast, accurate readings.

The Milwaukee MAX pH/ORP/EC/TDS/NaCl/Temp. Bench meter offers:

ACCURACY

People choose the MW180 5-in-1 MAX pH/ORP/EC/TDS/NaCl/Temp. Bench Logging Meter to improve the accuracy and efficiency of their testing program. With easy 1 point EC/NaCl and up to 3 point pH calibration, 7 memorized standard pH buffer choices, 6 memorized EC calibration solutions 2 point temperature calibration, the meter can be quickly calibrated to a higher temperature accuracy compared to other meters and it provides more accurate temperature compensation readings than a one point calibration. The MW180 5-in-1 MAX Bench Meter is accurate to ± 1% of reading for EC/TDS and NaCL.

The meter comes with MA814DB/1 (4 ring) conductivity probe, lab grade MA917B/1 pH electrode and temperature sensor MA831R, allowing the meter to automatically adjust the pH/ORP/EC/TDS/NaCl reading for the effect of temperature (ATC).

The meter can also be used as a very accurate thermometer with accuracy +/-0.4°C (+/-0.8°F)

TOUGHNESS

The rugged meter is built to take knocks and has a sleek design that includes a small benchtop footprint.

LOW MAINTENACE

The MW180 MAX pH/ORP/EC/TDS/NaCl/Temp. Bench Logging Meter comes with the Milwaukee MA814DB/1 combination EC sensor and MA917B/1 pH electrode. They are Milwaukee's top selling lab grade EC and pH probes for a reason. Designed to be both low maintenance and able to withstand more challenging samples. The MA814DB/1 and MA917B/1 are ideal for use in horticulture, aquaculture, environmental labs, water treatment/conditioning and many other applications.

DESIGN FEATURES

• Fast easy to read results with large duel level digital LCD readout.
• Extreme accuracy to +/-0.002 pH and 1% of reading for EC/TDS/NaCl |+/- 0.4°C (+/-0.8°F).
• Extended ranges for pH/ORP/EC/TDS/NaCl.
• Lightweight, sleek design featuring a small benchtop footprint.
• Simple easy-to-use logging and RS232/USB (opto-isolated) download functions.
• GLP data, date and time.
• Log-on-demand or auto. up to 50 records each parameter.
• Easy measurement: just place the probe(s) in the sample, gently stir and wait for the reading to stabilize.
• Up to 3 point pH automatic calibration, simple single point factor calibration for EC/TDS/NaCl, and two point for temperature allowing increased accuracy.
• Rugged low maintenance, high performance, easy-to-clean pH/EC/TDS/NaCl/Temp probes.
• Built in temperature sensor.
• 12VDC power supply (included).
• Temperature compensation automatic or manual.
• Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).
• 3 feet probe cables for extra flexibility when testing.
• Includes MA9315 electrode holder, pipets, initial calibration solutions, software and all cables.

CARE, USE AND CLEANING

pH/EC/TDS meters usually start performing poorly because of problems with the sediment on the conductivity probe's rings or build up on the glass pH bulb. The dirt on the EC probe rings or on the ph bulb can change impedance. Cleaning the rings is simple. Slide the plastic shield off and clean with DI water and soft cloth to keep your readings accurate. For pH, simply soak the pH electrode in MA9016 cleaning solution.

STORAGE

When not in use, store the meter and EC probe in a safe area to avoid damage. The EC probe is stored dry. The pH probe should be stored wet with MA9015 storage solution to keep the bulb moist during non-use times for best performance and life duration.

CLEANING

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016 for about 15 minutes.

You can extend the life of your pH electrode in the following ways.

CALIBRATION

The MW180 MAX is easy 1 point EC/TDS/NaCl calibration for ease-of-use, up to 3 point pH calibration and two point temperature calibration for best accuracy in (ATC). Calibrating regularly is best to keep your MI180 5-in-1 MAX Bench meter accurate for all your readings.

MW190 MAX Dissolved Oxygen Bench Meter With Automatic Calibration by Milwaukee

The Milwaukee MW190 MAX Bench Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.

The Milwaukee MW190 MAX DO Bench Meter is preferred by people looking for lab level accuracy without the high cost. The Milwaukee DO Meter is popular with everyone from field biologists, educators, fish farmers, koi pond owners, education, water treatement plants and laboratories.

DESIGN FEATURES

• Fast, easy-to-read results with large digital LCD readout.
• Repeatable, accuracy to ±1.5% FS.
• Lightweight and has a small benchtop footprint.
• Single offset or dual point slope with open air 100% saturation calibration.
• Altitude and Salinity compensation.
• Automatic temperature compensation.
• Uses MA845 (included) reinforced polarographic probe with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor
• 5 o-rings, membranes and one protective cap included
• 2 meter probe cable for extra flexibility when testing
• Logging up to 50 samples.
• 12 VDC power supply.
• Easy RS232/USB opto-isolated
• Complete with DO probe, initial calibration solutions and cables.

MW301 Standard Portable Conductivity Meter by Milwaukee

MW301 is a Conductivity Portable Meter, with Automatic Temperature Compensation, and is ideal for the educational and agricultural markets. Soil conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness. The EC testing provides all agricultural operation with a method to optimize chemical applications and minimize operational cost.

This instrument has been designed to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.

The MW301 has a range of 0 to 1990 µS/cm with a 10 µS/cm resolution. The meter is supplied complete with Conductivity probe with 1 meter cable and calibration solution.

MW302 Standard Portable Conductivity Meter by Milwaukee

MW302 is a Conductivity Portable Meter, with Automatic Temperature Compensation, and is ideal for the educational and agricultural markets. Soil conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness. The EC testing provides all agricultural operation with a method to optimize chemical applications and minimize operational cost.

This instrument has been designed to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.

The MW302 has a range of 0.0 to 10.0 mS/cm with a 0.1 mS/cm resolution. The meter is supplied complete with Conductivity probe with 1 meter cable and calibration solution.

MW306 MAX Waterproof EC/TDS/NaCl/Temp Logging Portable Meter by Milwaukee

The Milwaukee MW306 4-in-1 PRO EC/TDS/NaCl/Temp. Logging Portable Meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and IP67 Waterproof rating. Accurate to ± 1% EC/TDS & Salinity with automatic or manual temperature compensation, and built in GLP key. Ideal for use by hydroponics, horticulture, labs, food processing, water treatment and many other applications with challenging EC/TDS/NaCL/Temp. measurement needs.

WHAT PEOPLE ARE SAYING

• Amazingly accurate, the best meter I have used so far.
• Very satisfied, very accurate, rugged device that calibrates easily.
• Rarely needs to be calibrated and gives perfect readings every time.
• Killer tool, good value.
• Logging data is easy-to-use and download.
• Love the GLP function.
• Easey to Clean.

SUMMARY

The Milwaukee MW306 4-in-1 PRO EC/TDS/NaCl/Temp Portable Logging Meter is preferred by people testing samples in various applications. The easy-to-use logging feature allows data collection without messy notes and errors. From aquaculture and coral to hydroponic growers and farmers the MW306 is your meter for fast, accurate readings.

The Milwaukee PRO EC/TDS/NaCl/Temp. meter offers:

ACCURACY

People choose the MW306 4-in-1 PRO EC/TDS/NaCl/Temp Portable Logging Meter to improve the accuracy of their testing program. With easy one point calibration and six standard buffer calibrations choices, the meter can be quickly calibrated to a high accuracy compared to other meters and it provides highly accurate temperature compensation readings. The MW306 meter is accurate to ± 1% of reading for EC/TDS and NaCL.

The meter comes with MA815D/1 conductivity probe with a built in temperature sensor allowing the meter to automatically adjust the EC/TD/NaCl reading for the effect of temperature (ATC).

The meter can also be used as a very accurate thermometer with accuracy +/-0.5°C (+/-0.9°F)

TOUGHNESS

The rugged meter is built to take knocks and is IP67 Waterproof rated.

LOW MAINTENACE

The MW306 PRO EC/TDS/NaCl/Temp Portable Logging Meter comes with the Milwaukee amplified MA815D/1 combination EC/Temp sensor. This is Milwaukee's top selling lab grade EC probe for a reason. Designed to be both low maintenance and able to withstand more challenging samples. The MA815D/1 is ideal for use in hydroponics, horticulture, aquaculture, labs, water treatment/conditioning and many other applications.

DESIGN FEATURES

• Fast easy to read results with large duel level digital LCD readout.
• Extreme accuracy to 1% Of reading for EC/TDS/NaCl |+/- 0.5°C (+/-0.9°F).
• Extended ranges for EC/TDS/NaCl.
• Lightweight and portable, IP67 rated.
• Simple easy-to-use logging and USB download functions ,manual or on demand up to 1,000 logs.
• GLP data, date and time.
• Different logging methods, manual log-on-demand or manual log-on-stability.
• Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.
• Single cell factor calibration for EC/TDS automatic simple 1 point calibration.
• Rugged low maintenance, high performance, easy-to-clean EC/TDS/NaCL/Temp probe.
• Built in temperature sensor.
• 3 x 1.5V Alkaline AA batteries with 200 hours battery life (included).
• Built in Battery Error Prevention System (BEPS).
• Auto-Ranging Feature for EC/TDS.
• Auto-shut off feature to preserve battery energy.
• Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).
• 3 feet probe cables for extra flexibility when testing.

CARE, USE AND CLEANING

EC meters usually start performing poorly because of problems with the sediment on the conductivity probe's rings. The dirty rings on the probe can change impedance. Cleaning the rings is simple. Slide the plastic shield off and clean with DI water and soft cloth to keep your readings accurate.

STORAGE

When not in use, store the meter and probe in a safe area to avoid damage. The EC probe is stored dry. Remove batteries if not in use for a prolonged period to prevent battery compartment corrosion.

CALIBRATION

The MW306 is easy 1 point calibration for ease-of-use and high accuracy with built in (ATC) feature. Calibrating regularly is best to keep your PRO MW306 4-in-1 meter accurate for all your readings.

MW401 Standard Portable TDS Meter (range: from 0 to 1990 mg/L) by Milwaukee

MW401 is a TDS Portable Meter, with Automatic Temperature Compensation, and is ideal for the educational and agricultural markets. Soil conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness. The EC testing provides all agricultural operation with a method to optimize chemical applications and minimize operational cost.

This instrument has been designed to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.

The MW401 has a range of 0 to 1990 mg/L (ppm) with a 10 mg/L resolution; The meter is supplied complete with TDS probe with 1 meter cable and calibration solution.

MW402 Standard Portable TDS Meter (range: from 0.0 to 10.0 g/l) by Milwaukee

MW402 is TDS Portable Meter, with Automatic Temperature Compensation, and is ideal for the educational and agricultural markets. Soil conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness. The EC testing provides all agricultural operation with a method to optimize chemical applications and minimize operational cost.

This instrument has been designed to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.

MW402 has a range of 0.0 to 10.0 g/L (ppt) with a 0.1 g/L resolution. The meter is supplied complete with TDS probe with 1 meter cable and calibration solution.

MW500 Standard Portable ORP Meter by Milwaukee

Standard portable meters with no frills! Milwaukee's low cost durable meters for quick and reliable measurements.

Milwaukee's Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.

MW500 performs ORP measurements with a range of ±1000 mV. The meter is supplied with ORP electrode and calibration solutions.

MW605 DO - Dissolved Oxygen Portable Meter by Milwaukee

The Milwaukee MW605 MAX Galvanic Portable Waterproof Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.

The Milwaukee MW605 MAX DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists, educators, fish farmers, koi pond owners, water treatement plants and labs.

DESIGN FEATURES

• Fast, easy-to-read results with large digital LCD readout.
• Galvanic probe means no conditioning time.
• Repeatable, accuracy to ±1.5% of reading.
• Water Proof IP 67 Rated.
• Lightweight and portable.
• Simple 1 or 2 % saturation calibration points at 100% (water saturated air) and 0% (zero oxygen solution).
• Dedicated GLP key to store and recall data on system status.
• Available log space for up to 1000 records.
• Logged data export via USB cable.
• Altitude and Salinity compensation.
• Automatic temperature compensation °F & °C.
• Uses MA860 (included) reinforced Galvanic probe with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor.
• 2 O-rings, membranes and one protective cap included.
• 10 feet probe cable for extra flexibility when testing.
• 3 x 1.5 volt akaline AA battery (battery included) aprox. 200 hours of battery life with continuous use with low battery warning.

PROBE MAINTENANCE

THE SILVER CATHODE SHOULD ALWAYS BE BRIGHT AND UNTARNISHED. IF IT IS TARNISHED OR STAINED, THE CATHODE SHOULD BE CLEANED GENTLY WITHA LINT-FREE CLOTH.

• Rinse the probe with deionized or distilled water.
• Replace the membrane cap using fresh electrolyte.
• Recalibrate meter.

SENSING BULB

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

Membrane Maintenance:

• For accurate and stable measurements, perfect condition of the membrane surface is needed. Protect the thin membrane from scratches, abrasion or contact with solids.
• If no measurements are taken for a few hours, protect the membrane with the plastic protective cap.
• If fouled, rinse it carefully with distilled or deionized water. If damaged, replace the membrane cap.

Note: Change the membrane every 8 weeks or more frequently if used in a specially fouling environment. Check and replace the electrolyte fill solution every 4 weeks.

STORAGE

After taking measurements, switch the meter off and clean the probe before storage. When not in use the probe should be stored with the plastic cap on.

For short term storage, the probe can also be stored in a beaker of deionized water with the protective plastic cap removed.

For long term storage, the probe should be stored dry:
1. Disconnet the probe from the meter.
2. Unscrew the membrane cap.
3. Remove any electrolyte solution from the cap.
4. Rinse the probe anode/cathode assembly with distilleed water and blot dry.
5. Screw the membrane cap onto the probe until the membrane cap is hand tight.

MW700-WP Standard Portable Lux Meter with Waterproof Probe by Milwaukee

MW700 is a portable Lux meter designed to perform light measurements. MW700 with Faster Micro Processor, has a smaller, ergonomic and lighter case design. Other features include 100% larger and easier to read LCD Display and long battery life.

These handy and ergonomically designed portable meters are ideal for anyone working on a low budget and still requires fast and reliable measurements. These portable meters are suitable for a wide range of applications, such as Educational, Agriculture and Horticulture, as well as water and environmental analysis.

Both models are supplied with a light sensor connected to the meter that measures from 0 to 50000 Lux.

Average indoor lighting ranges from 100 to 1000 Lux and average outdoor sun lights about 50000 Lux. Lux is a unit that indicates the density of light that falls on a surface.

The light is necessary for the development of the plants. In fact, it is necessary a sufficient contribution of light in order to favor the photosynthesis and the closing of the plants.

The supplement of light by means of lamps electrical workers is the method simpler and economic in order to bring the necessary light to the plants.

The human eye is sensitive only to blue, green, and red light, so in calculating the Lux falling on an object, only the light that the human eye sees is counted. When only infrared light falls on an object, the Lux is counted as zero since our eyes see nothing. Mathematically, a spectral weighting function becomes convolved with the actual illumination spectrum to calculate Lux exactly.

This is the formal definition of Lux and it makes Lux an unusual unit of measure.

MW801 Standard Portable pH / Conductivity / TDS Combination Meter by Milwaukee

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe!

The MW801 with a Conductivity range that goes up to 1990 µS/cm and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements.

Supplied with the SE600 interchangeable probe to measure pH, Conductivity and TDS. The pH electrode utilizes a fiber junction to reduce contamination when measuring fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS.