Milwaukee

MA885 Digital Refractometer for Wine and Grape Product Measurements by Milwaukee

The MA885 is optical instrument that is based on the measurement of the refractive index of a solution. The measurement of refractive index is simple and quick and provides the vintner an accepted method for sugar content analysis.

Samples are measured after a simple user calibration with steam distilled water (starter bottle provided with your unit).

Within seconds the instrument measures the refractive index of the grape. This digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for measurements in the field.

The instrument utilizes internationally recognized references for unit conversion and temperature compensation.

Temperature (in °C or °F) is displayed simultaneously with the measurement on the large dual level display along with icons for Low Power and other helpful message codes.

Key features include:

• Dual-level LCD
• Automatic Temperature Compensation (ATC)
• Easy setup and storage
• Battery operation with Low Power indicator
• Automatically turns off after 3 minutes of non-use
• Single-point calibration with steam distilled water (starter bottle provided with your unit)
• Waterproof models offers IP65 waterproof protection
• Quick, precise results readings are displayed in approximately 1.5 seconds
• Small sample size as small as 2 metric drops

MA9069 5000 μS/cm Conductivity Calibration solution - 230 ml Bottle by Milwaukee

The performance of conductivity probes are affected by use due to residue build up and aging.

MA9069 is a lab grade 5000 μS/cm conductivity solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter.

Conductivity readings are effected by temperature. To help with this, a chart of the actual μS/cm value at various temperatures is printed on each bottle

Milwaukee conductivity solutions are labeled with the lot number and expiration date and packaged in an air tight, tamper-proof sealed bottle.

DESIGN FEATURES

• Fundamental for accurate conductivity measurement.
• Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
• Sealed against light with air tight, tamper proof cap.
• Each 230 mL bottle is marked with lot number and expiration date.
• A temperature chart of the actual µS/cm value at various temperatures is printed on each bottle.
• 5 year expiry date.

MA884 Digital Refractometer for Wine and Grape Product Measurements by Milwaukee

The MA884 is optical instrument that is based on the measurement of the refractive index of a solution. The measurement of refractive index is simple and quick and provides the vintner an accepted method for sugar content analysis.

Samples are measured after a simple user calibration with steam distilled water (starter bottle provided with your unit).

Within seconds the instrument measures the refractive index of the grape. This digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for measurements in the field.

The instrument utilizes internationally recognized references for unit conversion and temperature compensation.

Temperature (in °C or °F) is displayed simultaneously with the measurement on the large dual level display along with icons for Low Power and other helpful message codes.

Key features include:

• Dual-level LCD
• Automatic Temperature Compensation (ATC)
• Easy setup and storage
• Battery operation with Low Power indicator
• Automatically turns off after 3 minutes of non-use
• Single-point calibration with steam distilled water (starter bottle provided with your unit)
• Waterproof models offers IP65 waterproof protection
• Quick, precise results readings are displayed in approximately 1.5 seconds
• Small sample size as small as 2 metric drops

MC810 MAX pH/TDS/Temp Monitor by Milwaukee

ACCURATE. SIMPLE. RELIABLE. 24/7 PH/TDS/TEMP MONITORING.

Why Guard when you can Monitor! The Milwaukee MC810 MAX pH/TDS/Temp Monitor lets you monitor your pH/TDS/Temp levels 24/7 automatically.

COMMENTS FROM FIELD TESTING

"I run this unit 24/7 and have not had any problems for the past two months. I can monitor 24/7, point a camera on it and connect to my phone."
"Easy to calibrate."
"Using this now, far less expensive than what my friends paid ... I recommend this to any serious grower."

SUMMARY

The MC810 MAX Monitor automatically monitors and displays pH/TDS/Temp levels. Just calibrate the parameters and let the Milwaukee MAX Monitor do the rest.

The Milwaukee MC810 MAX pH/TDS/Temp Monitor is preferred by people looking to know 24/7 what their pH and nutrient levels are on an ongoing basis. Common uses are nutrient tanks, Hydroponics and aquariums.

The Milwaukee MAX pH/TDS/Temp Monitor offers:

ACCURACY

The Milwaukee MAX Monitor offers an accuracy to ± 0.2 pH with two point manual calibration, TDS accuracy of ±2% Full Scale and ±0.5 °F (0.3C) temperature accuracy.

AUTOMATION

Just calibrate the parameters and begin to monitor 24/7!

EASY INSTALLATION

The MC810 MAX pH/TDS/Temp Monitor comes with a complete mounting kit including a probe holder.

DESIGN FEATURES

• Fast easy to read current results with 3 large digital BACKLIT LCD readouts.
• Accurate to ±0.2 pH (0.0 pH to 12.0 pH).
• Accurate ±2% Full Scale TDS.
• External Switch atop the unit converts EC conductivity to TDS (ppm) using 0.5 or 0.7 conversion factor.
• Simple two-point pH calibration and one point TDS, for increased accuracy with manual trimmers for easy adjustment.
• Gel-filled, double junction MA911B/2 (included) lab grade pH electrode for low maintenance and high performance.
• 6.5 feet probe cables for extra flexibility when testing.
• 12 VDC power supply.

USE AND CARE

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

SENSING BULB

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

REFERENCE JUNCTION

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function.

You can extend the life of your pH electrode in the following ways.

STORAGE

The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibiration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

CLEANING

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution.

CALIBRATION

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating reguarly to keep your PRO pH controller accurate. Also, calibrate after cleaning or a long period of storage.

MW102 Standard Portable pH / Temperature Meter by Milwaukee

Standard portable meters with no frills! Milwaukee's low cost durable meters for quick and reliable measurements.

Milwaukee's Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.

MW102 is a microprocessor based pH/Temperature meter with extended range (-2.00 to 16.00 pH), Automatic Temperature Compensation, automatic calibration in 2 points and ±0.02 pH accuracy. The meter is supplied with pH electrode and calibration solutions.

MW600 Standard Portable Dissolved Oxygen Meter by Milwaukee

The MW600 is a compact Portable Dissolved Oxygen meter with Faster Micro Processor. This handy and ergonomically designed portable meter is ideal for anyone working on a low budget and still requires fast and reliable measurements. This portable meter measures Dissolved Oxygen with a Polarographic probe and is suitable for a wide range of applications, such as Educational and Aquaculture, as well as water and environmental analysis.

Other features include smaller, ergonomic and lighter case design, 100% larger and easier to read LCD Display, low battery warning, easy to replace screw on cap membranes and long battery life.

Rugged Carrying Case (Optional) provides handy on-site meter calibration and measurements.

MW600 is supplied complete with a MA840 D.O. polarographic probe with 3 m cable, calibration screwdriver, 2 spare membranes, MA9071s (30 mL) electrolyte solution, battery and instructions.

The MW600 calibrates easily in 2 points (at 100% saturated air and in 0 Oxygen solution) and has Automatic Temperature Compensation which guarantees the highest accuracy.

MA888BOX Digital Refractometer for Ethylene Glucol by Milwaukee

Thousands of cooling tower and recycle professionals from boiling towers to antifreeze recycling move to the digital MA888 Digital Ethylene Glycol meter for measurement of the refractive index to determine the % volume and freezing point of ethylene glycol based coolants or antifreeze, from less precise optical refractometers.

WHAT PEOPLE ARE SAYING

"Using this for my anti-freeze recycling business has saved me time and money."

"I am in love with this instrument. No more large samples. No more phony readings from badly made refractometers."

"Dramatically improved my commercial cooling tower evaluation times."

"I found the refractometer was much easier to use than I thought."

SUMMARY

The Milwaukee digital Ethylene and Glycol refractometer is temperature compensated with a 0 to 100 % volume / 0 to -50°C (32 to -58°F) freezing point / Temperature 0 to 80°C (32 to 176°F) range and +/- 0.2 volume / +/-0.5°C (+/-1°F) freezing point accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well. The MA888 eliminates the uncertainty of optical refractometers by providing and accurate digital readout.

DESIGN FEATURES

• Fast, accurate results with digital dual level LCD readout.
• Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds.
• Simple one-point calibration using distilled or deionized water.
• Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets.
• Battery percent level indicator with automatic shut-off (batteries included).
• Ideal for winemakers, brewers, syrup producers, food producers and many other applications.
• The instrument utilizes internationally recognized references for unit conversion and temperature compensation for ethylene glycol. solutions (e.g. CRC Handbook of Chemistry and Physics, 87th Edition).

Mi414 Chloride Professional Photometer by Milwaukee

Chlorides are used by the water treatment professional to determine cycles of concentration in low pressure boilers and cooling systems. It is essential to monitor chloride concentrations in boiler systems to prevent metal parts being damaged. In high levels, chloride can corrode stainless steel.

Milwaukee offers MI414 microprocessor-based instrument with greater resolution, better accuracy and immediate results for measuring chloride (0.00 to 20.00 mg/L).

AG900 Standard Portable pH / Conductivity / TDS Combination Meter Kit by Milwaukee

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe!

The AG900, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too acidic or alkaline can have an adverse effect on plant nutrient and water uptake and directly effect the efficiency of fertilizer, herbicides and pesticides. Soil Conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness.

Supplied with the SE600 interchangeable probe to measure pH, Conductivity and TDS. The pH electrode utilizes a fiber junction to reduce contamination when measuring fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS.

Includes

• MW802 ( ph/ec/tds ) Combination Meter
• Carrying Case
• pH 230ml Bottle 7.01 Calibration Solution
• EC - Conductivity Calibration Solution in 230ml Bottle

BEM101 pH Mini-Bench Meter by Milwaukee

• Double junction electrode with 1 meter cable
• Manual calibration 2 points
• Faster Processor with The New Chipset and Motherboard
• 100% Larger & Easier To Read LED Display
• Smaller, Ergonomic & Lighter Case Design
• Includes 9vDC power supply, mounting Kit, SE220 pH probe, probe holder, and 20ml pH 7.01 & 4.01 calibration solution

BEM401 TDS - PPM Mini-Bench Meter by Milwaukee

• Manual calibration 1 points
• Faster Processor with The New Chipset and Motherboard
• 100% Larger & Easier To Read LED Display
• Smaller, Ergonomic & Lighter Case Design
• Includes 9vDC power supply, mounting Kit, MA811D/1 TDS probe, probe holder, and 20ml 1382ppm calibration solution

BEM500 ORP Mini-Bench Meter by Milwaukee

• Factory calibrated
• Faster Processor with The New Chipset and Motherboard
• 100% Larger & Easier To Read LED Display
• Smaller, Ergonomic & Lighter Case Design
• Includes 9vDC power supply, mounting Kit, SE300 Platinum probe, and probe holder

BEM500 pH/EC/TDS Combo Mini-Bench Meter by Milwaukee

• Faster Processor with The New Chipset and Motherboard
• 100% Larger & Easier To Read LED Display
• Smaller, Ergonomic & Lighter Case Design
• Includes 9vDC power supply, mounting Kit, SE600 Combo probe, probe holder, and a 20ml sachet of calibration solution of pH 7.01, 1500ppm, and 1413µS/cm

C65 Waterproof Conductivity Tester with Replaceable Electrode (low range) by Milwaukee

These instruments are designed for all applications. It's IP65 Waterproof casing and replaceable electrode make them suitable also for heavy duty applications, such as Waste Water treatment and Agriculture. The modular design allows easy electrode and battery replacement.

All Waterproof testers are supplied in a leather casing complete with calibration solution, batteries, instruction manual and screwdriver for calibration.

The C65 is a waterproof conductivity tester (for fresh water) with automatic temperature compensation, 1 point manual calibration and a range of 0 to 1999 µS/cm.

C66 Waterproof Conductivity Tester with Replaceable Electrode (high range) by Milwaukee

The C66 is a conductivity IP65 waterproof tester, specifically designed for the hydroponics and Agricultural markets, with automatic temperature compensation and 1 point manual calibration. The tester has a range of 0.00 to 10.00 mS/cm.

The C66 has a replaceable electrode and is supplied in a casing with calibration solution sachets (M10031) and screwdriver for calibration. The modular design allows easy electrode and battery replacement.

CD600 TDS Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee CD600 Total Dissolved Solids (TDS) Pen is designed for hydroponics, aquariums, horticulture, water conditioning and many other applications. The CD600 helps you make sure that your plants are receiving the right amount of nutrient or helps you keep your filters up-to-date and clean for water filtration. Keep TDS in your target range to help your achieve better results.

DESIGN FEATURES

• Measures Total Disolved (TDS) direct and with automatic temperature compensation.
• Ideal range for hydroponics (0 to 1990 ppm).
• Units in ppm easily convertable to μS/cm.
• Factory calibrated with the ability to recalibrate if needed.
• Automatic Temperature Compensation (ATC).
• 350 hours continuous use (4 x 1.5V batteries included).
• Simple one point calibration.

MAINTENANCE

TDS/PPM electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.

CONVERTING TDS TO EC

The Milwaukee TDS Pen, like all TDS meters, provides a measure of Total Dissolved Solids (ppm) reading, of contaminates per unit of volume in a solution.

TDS/PPM is often converted to μS/cm. Different scales include the 500 scale, 650 scale and the 700 scale.

Your TDS/PPM readings can be approximately converted to μS/cm as shown in the examples below.

1 ppm = 2 μS/cm on the 0.5 factor scale

1 ppm = 1.43 μS/cm on the 442 scale or .70 factor scale

CD601 Conductivity Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee CD601 digital electrical conductivity (EC) Pen is designed for aquariums, aquaculture, pools, water conditioning and many other applications. The CD601 helps you make sure that your water has the right amount of nutrient to help keep fish tanks healthy or helps you keep your filters up-to-date and clean for water filtration. Keep EC in your target range to help your achieve better results.

DESIGN FEATURES

• Measures microSiemens (μS/cm) direct and with automatic temperature compensation.
• Ideal range for aquariums (0 to 1990 μS/cm).
• Units in μS/cm are easily convertable to (ppm).
• Factory calibrated with the ability to recalibrate if needed.
• Automatic Temperature Compensation (ATC).
• 350 hours continuous use (4 x 1.5V batteries included).
• Simple one point calibration.

MAINTENANCE

EC electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.

CONVERTING EC TO TDS

The Milwaukee EC Pen, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity.

EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, true PPM can only be determined through chemical analysis.

Your mS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below.

2,000 μS/cm = 2.0 mS/cm = 1000 ppm on .50 factor scale

2,000 μS/cm = 2.0 mS/cm = 1400 ppm on the 442 scale or .70 factor scale

CD610 TDS Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee CD610 Total Dissolved Solids High Range (PPM) Pen is designed for aquariums, pools and education and many other applications. The CD610 helps make sure that you keep your fish tank water clean and healthy. It is a cost effective tool for teacher's science labs. Keep PPM in your target range to help your achieve better results.

DESIGN FEATURES

• Measures Total Dissovled Solids (PPM) direct and with automatic temperature compensation.
• Ideal range for aquariums and pools (0 to 10000 ppm).
• Units in ppm easily convertable to μS/cm.
• Factory calibrated with the ability to recalibrate if needed.
• Automatic Temperature Compensation (ATC).
• 350 hours continuous use (4 x 1.5V batteries included).
• Simple one point calibration.

MAINTENANCE

EC/PPM electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.

CONVERTING TDS TO EC

The Milwaukee TDS/PPM Pen, like all TDS meters, provides a reading measured in parts per million of contaminates per unit of volume in a solution.

TDS/PPM is often converted to uS/cm. Different scales include the 500 scale, 650 scale and the 700 scale.

Your TDS/PPM reading can be approximately converted to μS/cm as shown in the examples below.

1 ppm = 2 μS/cm on the 0.5 factor scale

1 ppm = 1.43 μS/cm on the 442 scale or .70 factor scale

CD611 Conductivity Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee Conductivity Pen is designed for hydroponic and other growers to help you make sure that your plants are receiving the right amount of nutrient. Keep EC in your target range to help your achieve better results.

DESIGN FEATURES

• Measures conductivity and temperature with automatic temperature compensation
• Ideal range for hydroponics (0 to 20,000 μS/cm)
• Units in μS/cm easily convertable to ppm
• Factory calibrated with the ability to recalibrate if needed
• 350 hours continuous use (3 x 1.5V batteries included)

MAINTENANCE

EC electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap water after every use.

CONVERTING EC TO TDS

The Milwaukee EC Pen, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity.

EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, true PPM can only be determined through chemical analysis.

Your mS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below.

2,000 μS/cm = 2.0 mS/cm = 1000 ppm on .50 factor scale

2,000 μS/cm = 2.0 mS/cm = 1400 ppm on the 442 scale or .70 factor scale

CD97 TDS Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee CD97 Total Dissolved Solids Low Range (PPM) Pen is designed for water conditioning, education and many other applications. The CD97 helps you make sure that your keep your filters up-to-date and clean for water filtration and is a cost effective tool for teacher's science labs. Keep PPM in your target range to help your achieve better results.

DESIGN FEATURES

• Ideal range for water conditioning (0 to 999 ppm).
• Units in ppm easily convertable to μS/cm.
• Factory calibrated with the ability to recalibrate if needed.
• Automatic Temperature Compensation (ATC).
• 300 hours continuous use (4 x 1.5V batteries included).
• Simple one point calibration.

MAINTENANCE

EC/PPM electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.

CONVERTING TDS TO EC

The Milwaukee TDS/PPM Pen, like all TDS meters, provides a reading measured in parts per million of contaminates per unit of volume in a solution.

TDS/PPM is often converted to uS/cm. Different scales include the 500 scale, 650 scale and the 700 scale.

Your TDS/PPM reading can be approximately converted to uS/cm as shown in the examples below.

1 ppm = 2 μS/cm on the 0.5 factor scale

1 ppm = 1.43 μS/cm on the 442 scale or .70 factor scale

EC40 EC Nutrient Stick by Milwaukee

The Milwaukee EC/TDS Nutrient Meter is designed for Hydroponics, horticulture and agriculture to help you make sure that your vegetables and plants are receiving the right amount of nutrient to promote healthy growth with low to zero product waste. Keep EC/TDS in your target range to help your achieve better results.

DESIGN FEATURES

• Measures conductivity (EC) and total dissolved solids (TDS) with automatic temperature compensation.
• Ideal range for Hydroponics (0.2 to 4 mS/cm | 2 to 40 CF | 140 to 2800 ppm 0.7 scale | 100 to 2000 ppm 0.5 scale).
• Units directly in mS/cm/CF/PPM (no conversions required).
• Factory calibrated no continious calibration required.
• High accuracy.
• Automatic Temperature Compensation (ATC).
• Auto on/off feature.
• Blue LED display.
• Graphite electrode in ABC + PC body.
• Battery level indicators.
• Battery life up to 3 years with approx. 10 measurements per day.
• 3 X 1.5V AA (batteries included).

MAINTENANCE

EC/TDS electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.

CONVERTING EC TO TDS

The Milwaukee EC40 meter, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity.

EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, the EC40 has all the readings direct EC/TDS/CF.

Your μS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below.

1 μS/cm = 0.5 ppm on a .5 factor scale

1 μS/cm = 0.7 ppm on a .70 factor scale (442)

EC59 Pocket-size Conductivity / TDS / Temperature Meter with Replaceable Electrode by Milwaukee

This new waterproof Pocket-size EC/TDS/Temp Meter include features such as a replaceable probe, temperature in °C or °F, automatic temperature compensation with adjustable ß, battery level indicator, stability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing.

EC59 shows on the dual-level LCD the EC (3999 µS/cm) or TDS (2000 ppm) value. It also displays the temperature from 0.0 to 60.0°C (or 32.0 to 140.0°F) on the secondary level at the same time.