Economy Pocket Testers, Milwaukee

pH600-AQ pH Economical Pocket Tester with 1 Point Manual Calibration by Milwaukee

Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH, EC or TDS values.

Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions.

All EC/TDS testers compensate for the temperature variance automatically.

The pH600 is a pH tester specifically designed for the aquarium market. The calibration procedure is very simple and fast. This tester has 1 point manual calibration, ±0.1 pH accuracy and a range of 0.0 to 14.0 pH. The pH600 is supplied in a blister packaging complete with calibration screwdriver, batteries and instructions.

CD600 TDS Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee CD600 Total Dissolved Solids (TDS) Pen is designed for hydroponics, aquariums, horticulture, water conditioning and many other applications. The CD600 helps you make sure that your plants are receiving the right amount of nutrient or helps you keep your filters up-to-date and clean for water filtration. Keep TDS in your target range to help your achieve better results.

DESIGN FEATURES

• Measures Total Disolved (TDS) direct and with automatic temperature compensation.
• Ideal range for hydroponics (0 to 1990 ppm).
• Units in ppm easily convertable to μS/cm.
• Factory calibrated with the ability to recalibrate if needed.
• Automatic Temperature Compensation (ATC).
• 350 hours continuous use (4 x 1.5V batteries included).
• Simple one point calibration.

MAINTENANCE

TDS/PPM electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.

CONVERTING TDS TO EC

The Milwaukee TDS Pen, like all TDS meters, provides a measure of Total Dissolved Solids (ppm) reading, of contaminates per unit of volume in a solution.

TDS/PPM is often converted to μS/cm. Different scales include the 500 scale, 650 scale and the 700 scale.

Your TDS/PPM readings can be approximately converted to μS/cm as shown in the examples below.

1 ppm = 2 μS/cm on the 0.5 factor scale

1 ppm = 1.43 μS/cm on the 442 scale or .70 factor scale

CD601 Conductivity Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee CD601 digital electrical conductivity (EC) Pen is designed for aquariums, aquaculture, pools, water conditioning and many other applications. The CD601 helps you make sure that your water has the right amount of nutrient to help keep fish tanks healthy or helps you keep your filters up-to-date and clean for water filtration. Keep EC in your target range to help your achieve better results.

DESIGN FEATURES

• Measures microSiemens (μS/cm) direct and with automatic temperature compensation.
• Ideal range for aquariums (0 to 1990 μS/cm).
• Units in μS/cm are easily convertable to (ppm).
• Factory calibrated with the ability to recalibrate if needed.
• Automatic Temperature Compensation (ATC).
• 350 hours continuous use (4 x 1.5V batteries included).
• Simple one point calibration.

MAINTENANCE

EC electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.

CONVERTING EC TO TDS

The Milwaukee EC Pen, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity.

EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, true PPM can only be determined through chemical analysis.

Your mS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below.

2,000 μS/cm = 2.0 mS/cm = 1000 ppm on .50 factor scale

2,000 μS/cm = 2.0 mS/cm = 1400 ppm on the 442 scale or .70 factor scale

CD610 TDS Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee CD610 Total Dissolved Solids High Range (PPM) Pen is designed for aquariums, pools and education and many other applications. The CD610 helps make sure that you keep your fish tank water clean and healthy. It is a cost effective tool for teacher's science labs. Keep PPM in your target range to help your achieve better results.

DESIGN FEATURES

• Measures Total Dissovled Solids (PPM) direct and with automatic temperature compensation.
• Ideal range for aquariums and pools (0 to 10000 ppm).
• Units in ppm easily convertable to μS/cm.
• Factory calibrated with the ability to recalibrate if needed.
• Automatic Temperature Compensation (ATC).
• 350 hours continuous use (4 x 1.5V batteries included).
• Simple one point calibration.

MAINTENANCE

EC/PPM electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.

CONVERTING TDS TO EC

The Milwaukee TDS/PPM Pen, like all TDS meters, provides a reading measured in parts per million of contaminates per unit of volume in a solution.

TDS/PPM is often converted to uS/cm. Different scales include the 500 scale, 650 scale and the 700 scale.

Your TDS/PPM reading can be approximately converted to μS/cm as shown in the examples below.

1 ppm = 2 μS/cm on the 0.5 factor scale

1 ppm = 1.43 μS/cm on the 442 scale or .70 factor scale

CD611 Conductivity Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee Conductivity Pen is designed for hydroponic and other growers to help you make sure that your plants are receiving the right amount of nutrient. Keep EC in your target range to help your achieve better results.

DESIGN FEATURES

• Measures conductivity and temperature with automatic temperature compensation
• Ideal range for hydroponics (0 to 20,000 μS/cm)
• Units in μS/cm easily convertable to ppm
• Factory calibrated with the ability to recalibrate if needed
• 350 hours continuous use (3 x 1.5V batteries included)

MAINTENANCE

EC electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap water after every use.

CONVERTING EC TO TDS

The Milwaukee EC Pen, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity.

EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, true PPM can only be determined through chemical analysis.

Your mS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below.

2,000 μS/cm = 2.0 mS/cm = 1000 ppm on .50 factor scale

2,000 μS/cm = 2.0 mS/cm = 1400 ppm on the 442 scale or .70 factor scale

CD97 TDS Tester with ATC and 1 point manual calibration by Milwaukee

The Milwaukee CD97 Total Dissolved Solids Low Range (PPM) Pen is designed for water conditioning, education and many other applications. The CD97 helps you make sure that your keep your filters up-to-date and clean for water filtration and is a cost effective tool for teacher's science labs. Keep PPM in your target range to help your achieve better results.

DESIGN FEATURES

• Ideal range for water conditioning (0 to 999 ppm).
• Units in ppm easily convertable to μS/cm.
• Factory calibrated with the ability to recalibrate if needed.
• Automatic Temperature Compensation (ATC).
• 300 hours continuous use (4 x 1.5V batteries included).
• Simple one point calibration.

MAINTENANCE

EC/PPM electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.

CONVERTING TDS TO EC

The Milwaukee TDS/PPM Pen, like all TDS meters, provides a reading measured in parts per million of contaminates per unit of volume in a solution.

TDS/PPM is often converted to uS/cm. Different scales include the 500 scale, 650 scale and the 700 scale.

Your TDS/PPM reading can be approximately converted to uS/cm as shown in the examples below.

1 ppm = 2 μS/cm on the 0.5 factor scale

1 ppm = 1.43 μS/cm on the 442 scale or .70 factor scale

MW803 pH/Conductivity/TDS/Temperature Tester with Replaceable Electrode by Milwaukee

The MW803 and MW804 are pocket testers with dual-level LCD that measure pH/ Conductivity/TDS/Temperature in one single tester!

The large display shows readings in an extended range from 0.00 to 14.00 pH and 0 to 3999 μS/cm, 0 to 2000 ppm (MW803), 0 to 20.00 mS/cm, 0 to 10.00 ppt (MW804) and simultaneously shows temperature from 0.0 to 50.0°C or 32.0 to 122.0°F. They have a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient (β).

Ideal for quick and accurate measurements in swimming pools, aquariums and horticultural applications they can also be used in Industrial and Laboratory applications such as cooling towers, food processing, plating, drinking and waste water etc.

MW804 pH/Conductivity/TDS/Temperature Tester with Replaceable Electrode by Milwaukee

The MW803 and MW804 are pocket testers with dual-level LCD that measure pH/ Conductivity/TDS/Temperature in one single tester!

The large display shows readings in an extended range from 0.00 to 14.00 pH and 0 to 3999 μS/cm, 0 to 2000 ppm (MW803), 0 to 20.00 mS/cm, 0 to 10.00 ppt (MW804) and simultaneously shows temperature from 0.0 to 50.0°C or 32.0 to 122.0°F. They have a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient (β).

Ideal for quick and accurate measurements in swimming pools, aquariums and horticultural applications they can also be used in Industrial and Laboratory applications such as cooling towers, food processing, plating, drinking and waste water etc.

pH51 pH Waterproof Tester, Unit comes with 2 Points Manual Calibration by Milwaukee

The Milwaukee Waterproof pH51 Tester is one of our most accurate low cost, rugged and reliable pH testers in the market featuring the ability to easily replace the probe providing for years of carefree use. It's simple 2 point manual calibration is simple-to-use. Ideal for use in aquariums, hydroponics, horticulture, pools and many other applications.

The Milwaukee pH51 pH tester offers:

ACCURACY

The Waterproof pH51 tester is accurate to ±0.1 pH and is easy to read.

With easy 2 point manual calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results.

LONG LIFE

The tester comes with a replaceable pH probe with a double junction probe designed for longer life.

FAST RESPONSE

The probe is double junction allowing quick, accurate pH readings and respose times.

WATERPROOF CONSTRUCTION

No more worries about dropping your tester while measuring. The pH51 is waterproof to IP65.

LIGHT WEIGHT

At just 3.5 ounces, the pH51 is easy to handle at up to half the weight of other testers.

EASE-OF-USE

A large LCD screen makes reading results easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper.

DESIGN FEATURES

• Fast easy to read results with large digital LCD readout.
• Extreme pH accuracy to ±0.1 pH with a pH range (0.0 pH to 14.0 pH).
• Lightweight and portable.
• Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.
• Simple manual one or two-point calibration.
• Gel-filled, double junction pH electrode for low maintenance and high performance.
• Fully waterproof to IP65.
• Over 1500 hours of continuous battery life (batteries included).
• Replaceable pH electrode.

CARE AND USE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

Here are our top four tips.
1. Always store with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Tester in the sample for a faster result.

pH54 pH Waterproof Tester, Unit comes with, 2 Points Manual Calibration by Milwaukee

The Milwaukee Waterproof pH54 Tester is one of our most accurate low cost, rugged and reliable pH testers in the market featuring the ability to easily replace the probe providing for years of carefree use. It's simple 2 point manual calibration is simple-to-use. Ideal for use in aquariums, hydroponics, horticulture, education and many other applications.

The Milwaukee Waterproof pH54 pH tester offers:

ACCURACY

The Waterproof pH54 tester is accurate to ±0.1 pH and is easy to read.

With easy 2 point manual calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results.

LONG LIFE

The tester comes with a replaceable pH probe with a double junction probe designed for longer life.

FAST RESPONSE

The probe is double junction allowing quick, accurate pH readings and respose times.

WATERPROOF CONSTRUCTION

No more worries about dropping your tester while measuring. The pH54 is waterproof to IP65.

LIGHT WEIGHT

At just 3.5 ounces, the pH54 is easy to handle at up to half the weight of other testers.

EASE-OF-USE

A large LCD screen makes reading results easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper.

DESIGN FEATURES

• Fast easy to read results with large digital LCD readout.
• Extreme pH accuracy to ±0.1 pH with a pH range (0.00 pH to 14.00 pH).
• Extra Resolution to 0.01 pH.
• Lightweight and portable.
• Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.
• Simple manual one or two-point calibration.
• Gel-filled, double junction pH electrode for low maintenance and high performance.
• Fully waterproof to IP65.
• Over 1500 hours of continious battery life (batteries included).
• Replaceable pH electrode MA73600.

CARE AND USE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

Here are our top four tips.
1. Always store with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Tester in the sample for a faster result.

pH600-BOX pH Economical Pocket Tester with 1 Point Manual Calibration by Milwaukee

Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH, EC or TDS values.

Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions.

All EC/TDS testers compensate for the temperature variance automatically.

The pH600 is a pH tester can be used in many different applications and is considered an excellent starter unit for digital pH measurement. The calibration procedure is very simple and fast. This tester has 1 point manual calibration, ±0.1 pH accuracy and a range of 0.0 to 14.0 pH. The pH600 is supplied in a snap over "oyster shell" plastic packaging complete with calibration screwdriver, 20 ml of 7.01 calibration solution, batteries and instructions.

TH300 Thermometer complete with penetration probe and 1 meter cable by Milwaukee

Thousands of people have relied on the Milwaukee TH300 compact Digital Temperature Meter to read temperature in difficult areas with it's flexible 1 meter cable and stainless steel probe. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries and wineries the TH300 is your quick temperature meter.

SUMMARY

The Milwaukee TH300 compact digital thermometer is specifically designed to help professionals and home owners regulate their pools, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.

WHAT PEOPLE ARE SAYING

"Accurate results and calibrated right out of the box."
"Must have for any aquarium owner."
"Good value. Easy to use. Consistent."
"No dangerous chemicals"
"Used it in the field for checking the fruit to harvest, was great"

DESIGN FEATURES

• Fast, accurate results with large digital LCD readout.
• Extended temperature range: -50 to 150°C (-58 to 302°F)
• Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.
• Easy, flexible 1 meter cable for hard to reach places.
• Stainless Steel pointed probe for easy fruit penetration and easy cleaning.
• Long battery life, approx. 1 year. (batteries included)
• High accurate digital readings.

Clean and Safety

Here are our top four tips.
1. Always clean you stainless steel probe after use.
2. Pay close attention to the direction of the probe's sharp tip.
3. If the LCD begins to fade, change your batteries.
4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.

TH310 Stick Thermometer with stainless steel probe and Calibration Check feature by Milwaukee

Thousands of people have relied on the Milwaukee TH310 compact Digital Temperature Meter to read temperature in all types of applications. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries, wineries and labs the TH310 Stainless Steel Stick probe is your quick temperature meter.

SUMMARY

The Milwaukee TH310 compact digital thermometer is specifically designed to help professionals and home owners regulate their home brew, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.

WHAT PEOPLE ARE SAYING

"Accurate results and calibrated right out of the box."
"Must have for any aquarium owner."
"Good value. Easy to use. Consistent."
"No dangerous chemicals"
"Used it in the field for checking the fruit to harvest, was great"

DESIGN FEATURES

• Fast, accurate results with large digital LCD readout.
• Extended temperature range: -50 to 150°C (-58 to 302°F).
• Cal-Check feature.
• Fast NTC sensor response.
• Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.
• Easy sharp Stainless Steel temperature shaft for quick penetration.
• Stainless Steel probe for easy cleaning.
• Long battery life, approx. 3000 hours of continuous use (batteries included).
• High accurate digital readings.

Clean and Safety

Here are our top four tips.
1. Always clean you stainless steel probe after use.
2. Pay close attention to the direction of the probe's sharp tip.
3. If the LCD begins to fade, change your batteries.
4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.