$500 - $750, Test and Measurement, Jenco

6250KC Handheld pH/mV/Ion/Temp. Meter Kit by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case with RS-232-C IBM compatible communications interface, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6250 Handheld pH/mV/Ion/Temp. Meter
• 600P pH electrode, 3-ft cable, BNC connector, Max Temp. 60° C
• 6230A-ST Stainless Steel Temperature Probe
• 6230D115 AC Adapter
• 6250F Carrying case

• CE approved
• RS-232c output
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

6309PDTF pH/Temp/DO Analyzer Meter by Jenco

• Graphic LCD with manual backlight displays pH, dissolved oxygen,temperature, relay status and transmitter current mA output simultaneously.
• Automatic buffer recognition of US and European buffer sets.Calibration data is stored in memory and is ready for use on power up.
• Isolated and reversible 4-20 mA current output for pH/ dissolved oxygen allows it to be used as a proportional output.
• 5 programmable on/off relays: 2 for pH, 2 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access via an compatible computer allows multiple units to be connected and ganged together.
• Password protection.
• IP65 watertight case.

9173K Large LCD Polarographic Dissolved Oxygen Benchtop Meter Kit by Jenco

Dissolved Oxygen benchtop meter with extra large LCD display for ease of use. The meter uses polarographic type sensor with replaceable membranes and programmable pressure compensation, 600 to 1000 mBar and salinity compensation, 0 to 40.0 ppt. Communications is via. Features dual LCD displays for D.O. and temperature. ATC is a 10k thermistor. Power is 115/230V AC or by battery.

Includes:

• 9173 Large LCD Polarographic Dissolved Oxygen Benchtop Meter
• LD-900-7-DO Laboratory D.O. Probe with 8-Pin Connector
• LD-900-03A Membrane Kit with 6 Caps & KCL Solution
• 6230D115 AC Adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Clear LCD displays D.O. as percent air saturation or D.O. as parts per thousand, simultaneously with temperature.
• Manual or automatic temperature compensated (ATC) D.O. readings.
• User selectable salinity and pressure compensated D.O. readings.
• Works with accurate and reliable polarographic D.O. probes.
• Convenient one point calibration for D.O. calibration data is stored in memory and is ready for use on power up.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for D.O. and thermistor.
• AC adaptor or battery power.

3107K Benchtop Meter with RS-232 Interface Kit by Jenco

The Jenco Model 3107 bench type Conductivity, Salinity, Temperature System is a rugged, microprocessor based instrument designed for use in field laboratories and process control applications, using a four electrode cell, it is an essential tool for precise measurements of conductivity, salinity and temperature.

Includes:

• 3107 Benchtop Meter with RS-232 Interface
• K=1 Cond. Probe
• 6007D115 AC Adapter

3250MK Handheld Conductivity Meter Kit by Jenco

Includes:

• 3250M Handheld Conductivity Meter
• K=1 Cond. Probe
• 6230D115 AC Adapter
• Carrying Case

• Clear LCD displays conductivity, salinity or TDS, simultaneously with temperature.
• Convenient one point calibration. Calibration data is stored in memory and is ready for use on power up.
• Accepts 2-wire and 4-wire conductivity cells with k=0.1, k=1.0 and K=10.0 cell constants for improved flexibility and accuracy.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of conductivity, salinity, TDS with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

3250NK Cond/Sal/Temp Meter with RS-232 Computer Interface Kit by Jenco

Includes:

• 3250N Cond/Sal/Temp Meter with RS-232 Computer Interface
• 106 Glass/Platinum, with 8-pin connector, K=1.0
• 6230D115 AC Adapter
• 3250F Carrying Case

6219KA Digital pH/mV/Ion/Temp Meter Kit by Jenco

Includes:

• 6219 Digital pH/mV/ION/TEMP Meter
• 600P pH Electrode
• 6230D115 AC Adapter

• Two LCD display pH, mV, direct ion concentration and temperature.
• Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
• User selectable resolution of up to 0.001 for greatest accuracy.
• Direct read out in ion concentration to simplify ion measurements.
• RS-232 computer interface with software.
• AC adaptor or battery power (low battery indicator).

6219KB Digital pH/mV/Ion/Temp Meter Kit by Jenco

Includes:

• 6219 Digital pH/mV/ION/TEMP Meter
• 6005C Cable
• 6230D115 AC Adapter

• Two LCD display pH, mV, direct ion concentration and temperature.
• Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
• User selectable resolution of up to 0.001 for greatest accuracy.
• Direct read out in ion concentration to simplify ion measurements.
• RS-232 computer interface with software.
• AC adaptor or battery power (low battery indicator).

6219KB Digital pH/mV/Ion/Temp Meter Kit by Jenco

Includes:

• 6219 Digital pH/mV/ION/TEMP Meter
• 6005C Cable
• 6230A-ST Temp. Probe
• 6230D115 AC Adapter

• Two LCD display pH, mV, direct ion concentration and temperature.
• Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
• User selectable resolution of up to 0.001 for greatest accuracy.
• Direct read out in ion concentration to simplify ion measurements.
• RS-232 computer interface with software.
• AC adaptor or battery power (low battery indicator).

6250KB Handheld pH/mV/Ion/Temp. Meter Kit by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case with RS-232-C IBM compatible communications interface, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6250 Handheld pH/mV/Ion/Temp. Meter
• 6000P pH/Ref./Temperature Probe
• 6005C Extension Cable, 4-Pin to BNC & 8-Pin DIN, 3-ft
• 6230D115 AC Adapter
• 6250F Carrying case

• CE approved
• RS-232c output
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

6307 Benchtop pH/Conductivity Meter with RS-232 by Jenco

pH/Conductivity/Salinity/Temperature benchtop meter with dual LCD displays for conductivity and r pH/mV/temp. Features cell adjust and 4.01/7.00/10.01 buffer select.

• Dual LCDs display pH, conductivity, or salinity, simultaneously with temperature.
• Accepts 2-wire and 4-wire conductivity cells with k=1 or k=5 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 4 conductivity ranges are available for improved usability.
• Convenient calibration with automatic buffer recognition of us or european pH buffer sets. quick one point conductivity calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual compensation when temperature probe is not present.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Indication for electrode slope and electrode offset for optimized electrode maintenance.
• Splash resistant case is made with durable, reinforced plastic for added protection.
• RS-232 computer interface with software.
• BNC connector for pH/reference pH and mv.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• Separate pin plug connector for reference pH.
• AC adaptor or battery power.

6307K Benchtop pH/Conductivity Meter Kit by Jenco

pH/Conductivity/Salinity/Temperature benchtop meter with dual LCD displays for conductivity and r pH/mV/temp. Features cell adjust and 4.01/7.00/10.01 buffer select.

Includes:

• 6307 Benchtop pH/Conductivity Meter
• 600P pH Electrode
• K=1.0 Cell
• 6230D115 AC Adapter

• Dual LCDs display pH, conductivity, or salinity, simultaneously with temperature.
• Accepts 2-wire and 4-wire conductivity cells with k=1 or k=5 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 4 conductivity ranges are available for improved usability.
• Convenient calibration with automatic buffer recognition of us or european pH buffer sets. quick one point conductivity calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual compensation when temperature probe is not present.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Indication for electrode slope and electrode offset for optimized electrode maintenance.
• Splash resistant case is made with durable, reinforced plastic for added protection.
• RS-232 computer interface with software.
• BNC connector for pH/reference pH and mv.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• Separate pin plug connector for reference pH.
• AC adaptor or battery power.

6308CT Conductivity Analyzer Graphic Display, 3-Relays, IP-65, RS-485 by Jenco

Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.

• Bumpless calibration
• CE approved
• RS-485 output
• Programmable relays for conductivity
• Reversible and isolated 4 to 20ma output
• Programmable relay for temperature
• Conductivity/temp.measurement & control
• Simultaneous analysis and display for measurement and controls
• User programmable reference temperature temperature coefficient
• Selectable 2-wire or 4-wire cells for long cable length & wide measurement range

6309POT 1/4 DIN Panel Mount pH & ORP Analyzer by Jenco

pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 2 pH and 2 ORP fully programmable relays and one for temperature. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Graphical display. Tinned lead connectors. CE Approved.

• Ph/ORP/temp. measurement & control
• Display pH electrode efficiency
• Reversible & isolated 4~20ma output
• RS-485 output
• Bumpless calibration
• Graphic LCD dispaly,128 x 64with backlight
• Membrane switch with audio feedback
• Auto temp. compensation
• High 50/60 hz noise rejection
• Pipe/wall/panel mounting
• 1/4 DIN watertight enclosure
• One programmable relay for temp.
• CE approved
• Programmable linear/ORP current output or programmable linear/ anti-logarithmic current output

6312CTB Conductivity/TDS/Temp Industrial Online Controller by Jenco

• Graphic LCD with manual backlight displays conductivity/TDS, temperature, relay status and transmitter current mA output simultaneously.
• Convenient one point calibration and calibration data is stored in memory and is ready for use on power up.
• Two sets of Isolated and reversible 4-20 mA current output for conductivity and temperature allows it to be used as a proportional output.
• 2 programmable on/off relays conductivity.
• RS-485 output for remote access allows multiple units to be connected and ganged together.
• Password protection.

6312PTB pH or ORP Analyzer/Controller, 4-Relays, IP-65 Case, RS-485 by Jenco

• Graphic LCD with manual backlight displays pH, temperature, relay status, and transmitter current mA output.
• Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
• Two sets of isolated and reversible 4-20 mA current output for pH and temperature allows it to be used as a proportional output.
• 4 programmable on/off relays: 3 for pH and 1 for temperature.
• RS-485 output for remote access allows multiple units to be connected and ganged together.
• Password protection.
• IP65.

6350M pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 & Memory by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

6350MKA pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 & Memory Kit by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

Includes:

• 6350M: Conductivity meter with memory
• 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter
• 6350F: Carrying Case

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

6350MKB pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 & Memory Kit by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

Includes:

• 6350M pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 & Memory
• 600P pH/ref eledtrode
• 6230D115 AC adapter
• 6350F carrying case

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

6350MKC pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 & Memory Kit by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

Includes:

• 6350M pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 & Memory
• 600P pH/ref eledtrode
• model 101 K=1.0 cond. cell
• 6230D115 AC Adapter
• 6350F carrying case

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

6350NKA pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 Kit by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

Includes:

• 6350N: Conductivity meter
• 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter
• 6350F: Carrying Case

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

6350NKB pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 Kit by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

Includes:

• 6350N: Conductivity meter
• 600P: pH/Ref. electrode
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter
• 6230F: Carrying Case with pH4, pH7 buffer capsule

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

6350NKC pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 Kit by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

Includes:

• 6350N pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232
• 600P pH/ref eledtrode
• model 101 K=1.0 cond. cell
• 6230D115 AC Adapter
• 6350F carrying case

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output