Digital Gas Controllers, Honeywell Analytics

HA71N4-8 8 Channel Controller by Honeywell Analytics

Honeywell Analytics offers a family of gas detection controllers that monitor 2, 4, 8 or 16 points of gas detection. Our controller family delivers robust safety while being cost effective.

The Honeywell digital gas controllers are designed to work in the harshest industrial or commercial environments. A NEMA4x and explosion proof enclosure allows you to place the controllers in all hazardous locations to monitor for toxic gases, combustible gases, and oxygen deficiency.

The controllers are easy to install and feature large graphical LCD display, standard 4-20mA inputs, and non-intrusive inputs for hazardous areas. An optional RS-485 Modbus slave port allows up to 128 HA 40 s to be multi-dropped onto a single data highway for interrogation by another Modbus master. A 10-BaseT Ethernet cable is also available for utilizing the popular Modbus TCP/IP protocol.

The HA-20 and HA-40 controllers are designed to provide simultaneous display and alarm functions for two or four 4-20mA sensor transmitters. The 4-20mA inputs are standard equipped and ideal for interfacing to sensor transmitters that may be long distances from the controller.

The Honeywell Analytics HA-71 16 Channel Gas Detection Controller is designed to provide simultaneous display and alarm functions for up to 16 input variables.

HA40PY-H 4 Channel Controller by Honeywell Analytics

Honeywell Analytics offers a family of gas detection controllers that monitor 2, 4, 8 or 16 points of gas detection. Our controller family delivers robust safety while being cost effective.

The Honeywell digital gas controllers are designed to work in the harshest industrial or commercial environments. A NEMA4x and explosion proof enclosure allows you to place the controllers in all hazardous locations to monitor for toxic gases, combustible gases, and oxygen deficiency.

The controllers are easy to install and feature large graphical LCD display, standard 4-20mA inputs, and non-intrusive inputs for hazardous areas. An optional RS-485 Modbus slave port allows up to 128 HA 40 s to be multi-dropped onto a single data highway for interrogation by another Modbus master. A 10-BaseT Ethernet cable is also available for utilizing the popular Modbus TCP/IP protocol.

The HA-20 and HA-40 controllers are designed to provide simultaneous display and alarm functions for two or four 4-20mA sensor transmitters. The 4-20mA inputs are standard equipped and ideal for interfacing to sensor transmitters that may be long distances from the controller.

The Honeywell Analytics HA-71 16 Channel Gas Detection Controller is designed to provide simultaneous display and alarm functions for up to 16 input variables.

HA71N4-16 16 Channel Controller by Honeywell Analytics

Honeywell Analytics offers a family of gas detection controllers that monitor 2, 4, 8 or 16 points of gas detection. Our controller family delivers robust safety while being cost effective.

The Honeywell digital gas controllers are designed to work in the harshest industrial or commercial environments. A NEMA4x and explosion proof enclosure allows you to place the controllers in all hazardous locations to monitor for toxic gases, combustible gases, and oxygen deficiency.

The controllers are easy to install and feature large graphical LCD display, standard 4-20mA inputs, and non-intrusive inputs for hazardous areas. An optional RS-485 Modbus slave port allows up to 128 HA 40 s to be multi-dropped onto a single data highway for interrogation by another Modbus master. A 10-BaseT Ethernet cable is also available for utilizing the popular Modbus TCP/IP protocol.

The HA-20 and HA-40 controllers are designed to provide simultaneous display and alarm functions for two or four 4-20mA sensor transmitters. The 4-20mA inputs are standard equipped and ideal for interfacing to sensor transmitters that may be long distances from the controller.

The Honeywell Analytics HA-71 16 Channel Gas Detection Controller is designed to provide simultaneous display and alarm functions for up to 16 input variables.

72-04 HA-72N4 Controller with ST-72 in NEMA 4X Large Fiberglass Enclosure by Honeywell Analytics

Centralize display and alarm functions with a flexible 16-64 channel controller that adapts and expands to your requirements, as a standalone solution or networkable device.

The HA72 controller is a flexible, scaleable gas controller that works the way you need it to. Input/Output modules allow for sets of 16, 32, 48 or 64 channel monitoring. Deploy the HA72 as a robust standalone life safety solution or addressable network with gas monitors and other field devices. User-friendly and visually powerful, the HA72 interface puts you in control of mission-critical information and allows you to share it across the enterprise via a secure, password-protected interface.

Flexible & Feature Rich

• Configure HA72 to accept inputs from many sensor types and signal ranges. Daisy chain up to 128 HA72 controllers to expand the system to meet your needs
• Custom software auto-recognizes and addresses Honeywell gas monitors (XNX™ and Sensepoint XCD)
• Connect sensors directly to HA72 with bridge sensor input board, saving installation time and eliminating need for extra devices
• Use HA72 as a discrete life safety system or network to a PLC or DCS for addressable operation
• Multiple password levels allow Ethernet access according to user need or qualification
• Various enclosure options available for hazardous and non-classified areas
• Programmable relays allow for a single relay contact point fo multiple devices

Advanced, User-Friendly Interface

• Full array of visual indicators (bar graphs, multicolor cells, flashing icons) and integrated alarm levels simplify and enhance monitoring, troubleshooting and trending functions
• Improved zone logic reduces false alarm incidents
• Touch & magnetic keypad allows nonintrusive operation in hazardous locations
• SD card logs over one year of data including concentration levels, alarm events, min/max, calibrations and alarm resets
• NEMA 4X, NEMA 4X Stainless Steel, full and half "19" Rackmount and NEMA 7 (Explosion-Proof) wall-mount options
• Modbus master/slave functionality allows for simultaneous sending and receiving of data, through four RS-485 serial ports
• Calibration and Authorization Modes facilitate and speed commissioning time; Mimic Mode allows viewing of other HA72 controllers on the host display

72-02 HA-72RM/1 Controller with One ST-72SM in Full Width 19" Rack (64 Channels) by Honeywell Analytics

Centralize display and alarm functions with a flexible 16-64 channel controller that adapts and expands to your requirements, as a standalone solution or networkable device.

The HA72 controller is a flexible, scaleable gas controller that works the way you need it to. Input/Output modules allow for sets of 16, 32, 48 or 64 channel monitoring. Deploy the HA72 as a robust standalone life safety solution or addressable network with gas monitors and other field devices. User-friendly and visually powerful, the HA72 interface puts you in control of mission-critical information and allows you to share it across the enterprise via a secure, password-protected interface.

Flexible & Feature Rich

• Configure HA72 to accept inputs from many sensor types and signal ranges. Daisy chain up to 128 HA72 controllers to expand the system to meet your needs
• Custom software auto-recognizes and addresses Honeywell gas monitors (XNX™ and Sensepoint XCD)
• Connect sensors directly to HA72 with bridge sensor input board, saving installation time and eliminating need for extra devices
• Use HA72 as a discrete life safety system or network to a PLC or DCS for addressable operation
• Multiple password levels allow Ethernet access according to user need or qualification
• Various enclosure options available for hazardous and non-classified areas
• Programmable relays allow for a single relay contact point fo multiple devices

Advanced, User-Friendly Interface

• Full array of visual indicators (bar graphs, multicolor cells, flashing icons) and integrated alarm levels simplify and enhance monitoring, troubleshooting and trending functions
• Improved zone logic reduces false alarm incidents
• Touch & magnetic keypad allows nonintrusive operation in hazardous locations
• SD card logs over one year of data including concentration levels, alarm events, min/max, calibrations and alarm resets
• NEMA 4X, NEMA 4X Stainless Steel, full and half "19" Rackmount and NEMA 7 (Explosion-Proof) wall-mount options
• Modbus master/slave functionality allows for simultaneous sending and receiving of data, through four RS-485 serial ports
• Calibration and Authorization Modes facilitate and speed commissioning time; Mimic Mode allows viewing of other HA72 controllers on the host display

72-07 HA-72CP Controller with ST-72 in NEMA 4X Compact Non Metallic Enclosure by Honeywell Analytics

Centralize display and alarm functions with a flexible 16-64 channel controller that adapts and expands to your requirements, as a standalone solution or networkable device.

The HA72 controller is a flexible, scaleable gas controller that works the way you need it to. Input/Output modules allow for sets of 16, 32, 48 or 64 channel monitoring. Deploy the HA72 as a robust standalone life safety solution or addressable network with gas monitors and other field devices. User-friendly and visually powerful, the HA72 interface puts you in control of mission-critical information and allows you to share it across the enterprise via a secure, password-protected interface.

Flexible & Feature Rich

• Configure HA72 to accept inputs from many sensor types and signal ranges. Daisy chain up to 128 HA72 controllers to expand the system to meet your needs
• Custom software auto-recognizes and addresses Honeywell gas monitors (XNX™ and Sensepoint XCD)
• Connect sensors directly to HA72 with bridge sensor input board, saving installation time and eliminating need for extra devices
• Use HA72 as a discrete life safety system or network to a PLC or DCS for addressable operation
• Multiple password levels allow Ethernet access according to user need or qualification
• Various enclosure options available for hazardous and non-classified areas
• Programmable relays allow for a single relay contact point fo multiple devices

Advanced, User-Friendly Interface

• Full array of visual indicators (bar graphs, multicolor cells, flashing icons) and integrated alarm levels simplify and enhance monitoring, troubleshooting and trending functions
• Improved zone logic reduces false alarm incidents
• Touch & magnetic keypad allows nonintrusive operation in hazardous locations
• SD card logs over one year of data including concentration levels, alarm events, min/max, calibrations and alarm resets
• NEMA 4X, NEMA 4X Stainless Steel, full and half "19" Rackmount and NEMA 7 (Explosion-Proof) wall-mount options
• Modbus master/slave functionality allows for simultaneous sending and receiving of data, through four RS-485 serial ports
• Calibration and Authorization Modes facilitate and speed commissioning time; Mimic Mode allows viewing of other HA72 controllers on the host display

HA20PY-H 2 Channel Controller by Honeywell Analytics

Honeywell Analytics offers a family of gas detection controllers that monitor 2, 4, 8 or 16 points of gas detection. Our controller family delivers robust safety while being cost effective.

The Honeywell digital gas controllers are designed to work in the harshest industrial or commercial environments. A NEMA4x and explosion proof enclosure allows you to place the controllers in all hazardous locations to monitor for toxic gases, combustible gases, and oxygen deficiency.

The controllers are easy to install and feature large graphical LCD display, standard 4-20mA inputs, and non-intrusive inputs for hazardous areas. An optional RS-485 Modbus slave port allows up to 128 HA 40 s to be multi-dropped onto a single data highway for interrogation by another Modbus master. A 10-BaseT Ethernet cable is also available for utilizing the popular Modbus TCP/IP protocol.

The HA-20 and HA-40 controllers are designed to provide simultaneous display and alarm functions for two or four 4-20mA sensor transmitters. The 4-20mA inputs are standard equipped and ideal for interfacing to sensor transmitters that may be long distances from the controller.

The Honeywell Analytics HA-71 16 Channel Gas Detection Controller is designed to provide simultaneous display and alarm functions for up to 16 input variables.