Temperature Measurement Products, Digi-Sense

08080-74 Stainless Steel Bimetal Pocket Thermometer, 1" Dial, Poly Lens, 8" Stem, 0-150C, 1C Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test, and a plastic storage sleeve with pocket clip

18527-93 Compression Fitting; Probe Diameter 1/4"; 316 Stainless Steel 1/8" NPT (M) by Digi-Sense

Use fittings for straight-shaft probes and metal tubing only. Tighten compression nut to secure and completely seal probe. Replacement ferrules let you reuse a compression fitting when replacing a worn-out probe. Simply disassemble fitting, discard probe and old ferrule, install replacement ferrule over probe sheath, and retighten fitting. Connectors come in both 316 Stainless Steel and Brass.

• Available in both 316 Stainless Steel and Brass

09035-25 Irreversible 5 to Point Vertical Temperature Label, 480 to 554°F / 249 to 290°C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

08080-79 Stainless Steel Bimetal Pocket Thermometer, 1" Dial, Poly Lens, 8" Stem, 50-550F, 5F Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test, and a plastic storage sleeve with pocket clip

18527-03 Thermocouple Connector, Standard, Type-J, Male Plug; 1/ea by Digi-Sense

• Glass-filled nylon construction with molded barriers to prevent short circuit
• Secure thermocouple wire into positive/negative terminals with screws
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue

18525-14 Type T Spring Loaded Ind Thermocouple Probe Probe 6" L, 12" Ext .250 Dia, Ung Jct by Digi-Sense

These probes cannot be inserted directly into a medium. Spring loaded industrials are not sealed where the threads meet the probe. They must be inserted into a thermowell or other sealed vessel.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are spring loaded which allows the probe to be bottomed out into a thermowell
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

18526-46 Type T Economic Bolt On Thermocouple Probe #6 Screw 36" Fiberglass Ext. Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Available in #6 (M3.5) or #8 (M4) screw sizes and different lead lenghts
• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector or stripped leads: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

18527-74 Dual Thermocouple Connector, Mini, Male, Type-K; 1/ea by Digi-Sense

• Glass-filled nylon construction with molded barriers to prevent short circuit
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue

90260-10 General Purpose Liquid-In-Glass Thermometer, -40 to 120°F, 76 mm Immersion; Organic Liquid Fill by Digi-Sense

These thermometers are inexpensive and safe for use in laboratories, universities, food/beverage, environmental, wastewater, petrochemical, pharmaceutical and many other general-purpose applications. Choose from partial immersion or total immersion thermometers.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include a ring top and a statement of accuracy supplied by manufacturer.

• Nonmercury blue spirit liquid
• Statement of accuracy

Includes

Ring top and a statement of accuracy supplied by manufacturer.

90308-60 Irreversible 4-Point Horizontal Temperature Label, 261-289F/127-143C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

09035-21 Irreversible 5 to Point Vertical Temperature Label, 270 to 309°F/132 to 154°C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

08068-43 Irreversible 4-Point Micro Horizontal Temperature Label, 160-190F; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

Reliable proof that the product was maintained at the correct temperature

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

93831-20 Air / Gas RTD Probe, 100 Ohm, ANSI 3-Blade Connector, 5" L, 5ft Coil Cord by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

09037-08 Reversible 7-Point Horizontal Temperature Label, 30C-60C/86-140F; 10/Pk by Digi-Sense

These self-adhesive reusable temperature labels provide a safe, accurate, easy-to-read means for monitoring temperatures. Indicating strips use liquid crystal technology to display the current temperature at an economical cost. The strip will turns a green color when ambient temperature is reached. Shelf life: 1 year after date of purchase.

• Non-toxic / non-hazardous temperature measuring alternative
• Easy to read and unbreakable

90260-11 General Purpose Liquid-In-Glass Thermometer; 0 to 230F, 76mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are inexpensive and safe for use in laboratories, universities, food/beverage, environmental, wastewater, petrochemical, pharmaceutical and many other general-purpose applications. Choose from partial immersion or total immersion thermometers.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include a ring top and a statement of accuracy supplied by manufacturer.

• Nonmercury blue spirit liquid
• Statement of accuracy

Includes

Ring top and a statement of accuracy supplied by manufacturer.

09035-49 Reversible 7-Point Horizontal Temperature Label Black/Red, -22-32F/-30-0C; 10/Pk by Digi-Sense

These self-adhesive reusable temperature labels provide a safe, accurate, easy-to-read means for monitoring temperatures. Indicating strips use liquid crystal technology to display the current temperature at an economical cost. The strip will turns a green color when ambient temperature is reached. Shelf life: 1 year after date of purchase.

• Non-toxic / non-hazardous temperature measuring alternative
• Easy to read and unbreakable

09037-20 Reversible 16-Point Vertical Temperature Label, 14-31C/58-88F; 10/Pk by Digi-Sense

These self-adhesive reusable temperature labels provide a safe, accurate, easy-to-read means for monitoring temperatures. Indicating strips use liquid crystal technology to display the current temperature at an economical cost. The strip will turns a green color when ambient temperature is reached. Shelf life: 1 year after date of purchase.

• Non-toxic / non-hazardous temperature measuring alternative
• Easy to read and unbreakable

18527-13 Miniature Type-K Thermocouple Male Connector, 2 Pin by Digi-Sense

• Molded barriers prevent short circuit and the solid pin design ensures good contact even in demanding applications
• Miniature connectors are suited for small wires and mineral insulated cables
• Connector-body color is brown, calibration type (J or K) is printed on the body

18520-49 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 12" L, .125 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

18527-62 Dual Thermocouple Connector, Standard, Male, Type-K; 1/ea by Digi-Sense

• Glass-filled nylon construction with molded barriers to prevent short circuit
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue

08008-20 General Purpose Liquid-In-Glass Thermometer; -20 to 110C, Total Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in laboratory, biology, chemistry, university, photographic, food/beverage, petrochemical, automotive, wastewater and many other general purpose applications.

All Durac thermometers feature markings that are permanently printed on the glass, red spirit liquid that has a dark scale contrasts against a white background.

• Non-mercury red spirit liquid
• Celsius-scale

08107-26 Surface Thermometer, 2.5" Face, 1-Spring Pipe Mount, 0 to 500 ° F by Digi-Sense

Fast, reliable, method of measuring surface temperature of pipes and other rounded surfaces. The temperature sensor is protected from drafts and other heat sources by a barrier guaranteeing integrity of readings. Two different models are available which are designed to fit around a large range of diameter surfaces. The 2 ½" model has a rugged 304SS case and is supplied with a single 300 series SS spring for mounting rounded surfaces of 1" and smaller. Both models are supplied with a heat treated bi-metallic sensor.

• For reference only, not intended for applications where a precise reading is required
• Item is not recommended to be calibrated

08077-96 Armored Liquid-In-Glass Thermometer; 0 to 300F, 76mm Immersion, Organic Liquid Fill by Digi-Sense

Ideal for use in application where thermometers needs added protection from minor shocks. Nickel/plated brass armor shell protects these thermometers from accidental breakage during use and storage. The armor case has a screw cap with ring top and viewing window; the lower section that surrounds the bulb has small openings for circulation.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include statement of accuracy and a triangular-style antiroll fitting.

Armor shell absorbs shock and prevents thermometer damage

• Nonmercury blue spirit liquid
• Statement of accuracy included

08541-01 J30-1-304 Thermocouple, Wire, Type-J, 30-Gauge, Glass Braid Insulation, 100-ft, Spool by Digi-Sense

Wire comes in 30 gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with fluorinated ethylene propylene resin (FEP/FEP) or fiberglass materials as well as in 100-ft or 1000-ft lengths for any application.