Temperature Controllers, Digi-Sense

WD-36225-71 2-Zone Temperature Controller; Type J, 120V/15A by Digi-Sense

These controllers are designed for controlling two independent temperature processes. and features modern control technology that produces greater temperature stability. The space saving design combines two controllers into one unit to maximize bench space. Each unit displays both the setpoint and process temperature. Auto-tune minimizes setpoint overshoot and feature the ablity to learns your process producing greater stability. The controller also features an audible alarm function, and two panel mounted receptacles that accept three-prong plugs. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Setpoint is easily and securely changed with an interface key

Includes

6' detachable power cord and a lattice support bracket

WD-36225-72 2-Zone Temperature Controller; Type K, 120V/15A by Digi-Sense

These controllers are designed for controlling two independent temperature processes. and features modern control technology that produces greater temperature stability. The space saving design combines two controllers into one unit to maximize bench space. Each unit displays both the setpoint and process temperature. Auto-tune minimizes setpoint overshoot and feature the ablity to learns your process producing greater stability. The controller also features an audible alarm function, and two panel mounted receptacles that accept three-prong plugs. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Setpoint is easily and securely changed with an interface key

Includes

6' detachable power cord and a lattice support bracket

WD-36225-73 2-Zone Temperature Controller; Type T, 120V/15A by Digi-Sense

These controllers are designed for controlling two independent temperature processes. and features modern control technology that produces greater temperature stability. The space saving design combines two controllers into one unit to maximize bench space. Each unit displays both the setpoint and process temperature. Auto-tune minimizes setpoint overshoot and feature the ablity to learns your process producing greater stability. The controller also features an audible alarm function, and two panel mounted receptacles that accept three-prong plugs. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Setpoint is easily and securely changed with an interface key

Includes

6' detachable power cord and a lattice support bracket

WD-36225-74 2-Zone Temperature Controller; RTD, 120V/15A by Digi-Sense

These controllers are designed for controlling two independent temperature processes. and features modern control technology that produces greater temperature stability. The space saving design combines two controllers into one unit to maximize bench space. Each unit displays both the setpoint and process temperature. Auto-tune minimizes setpoint overshoot and feature the ablity to learns your process producing greater stability. The controller also features an audible alarm function, and two panel mounted receptacles that accept three-prong plugs. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Setpoint is easily and securely changed with an interface key

Includes

6' detachable power cord and a lattice support bracket

WD-36225-76 1-Zone Temperature Controller; Limit/Alarm, Type J, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-77 1-Zone Temperature Controller; Limit/Alarm, Type K, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-78 1-Zone Temperature Controller; Limit/Alarm, Type T, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-79 1-Zone Temperature Controller; Limit/Alarm, RTD, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-90 104A PL512 On/Off Temperature Controller, Type J, -328 to 2192°F, 120V by Digi-Sense

This controller is designed to turn the power on and off to the output receptacle based on the set temperature. Equipped with a dial contol that allows you to set and regulate the desired temperature. Features a digital display, selectable temperature scales, and one panel-mointed receptacle. To save bench space, mount the unit to a support pole or lattice

• A basic on/off controller for processes where temperature stability is less critical

WD-89800-11 TC9100 Benchtop Temperature Controller for Thermocouples; 115 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

Includes

grid support bracket, electrical noise canceling ferrite clip, and 6 ft power cord with U.S. standard plug.

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting

WD-89800-12 TC9100 Benchtop Temperature Controller for Thermocouples; 230 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

Includes

grid support bracket, electrical noise canceling ferrite clip, and IEC socket power connector for interchangeable cord sets (specify country of destination when ordering).

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting

WD-89800-13 TC9600 Benchtop Temperature Controller with USB Output, for Thermocouple, RTD, or Thermistors; 115 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

The advance controllers also include a USB communication port, audible alarm, external alarm relay output, and a detachable power cord. Free software features real-time graphing, logging of measured temperature and set point temperature, help menu, and ability to interface with other Windows-based programs.

Includes

grid support bracket, electrical noise canceling ferrite clip, and 6 ft power cord with U.S. standard plug.

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting
• Free software offers remote computer control of system operations
• Program up to nine ramp and soak profiles of up to 16 segments each